Hi Shunqian,
On Fri, Jan 12, 2018 at 10:30:57AM +0800, Shunqian Zheng wrote:
> Hi Sakari,
>
>
> On 2018年01月03日 19:43, Sakari Ailus wrote:
> > > +static int ov2685_s_stream(struct v4l2_subdev *sd, int on)
> > > +{
> > > + struct ov2685 *ov2685 = to_ov2685(sd);
> > > + struct i2c_client *client = ov2685->client;
> > > + int ret = 0;
> > > +
> > > + mutex_lock(&ov2685->mutex);
> > > +
> > > + on = !!on;
> > > + if (on == ov2685->streaming)
> > > + goto unlock_and_return;
> > > +
> > > + if (on) {
> > > + /* In case these controls are set before streaming */
> > > + ov2685_set_exposure(ov2685, ov2685->exposure->val);
> > > + ov2685_set_gain(ov2685, ov2685->anal_gain->val);
> > > + ov2685_set_vts(ov2685, ov2685->vblank->val);
> > > + ov2685_enable_test_pattern(ov2685, ov2685->test_pattern->val);
> > You should use __v4l2_ctrl_handler_setup() here. Or put that to the
> > driver's runtime_resume function. That actually might be better.
> The v3 put __v4l2_ctrl_handler_setup() to the runtime_resume callback. But
> ov2685_s_stream()
> -> pm_runtime_get_sync()
> -> ov2685_runtime_resume()
> -> __v4l2_ctrl_handler_setup()
> -> pm_runtime_get_if_in_use(), always <= 0 because
> dev->power.runtime_status != RPM_ACTIVE.
>
> Seems like __v4l2_ctrl_handler_setup() has to be in ov2685_s_stream().
Right, indeed. Well spotted.
The smiapp driver uses a device specific variable for the purpose, thus I
missed this. Other drivers apply the controls while streaming on.
>
> Thanks
> > > +
> > > + ret = ov2685_write_reg(client, REG_SC_CTRL_MODE,
> > > + OV2685_REG_VALUE_08BIT, SC_CTRL_MODE_STREAMING);
> > > + if (ret)
> > > + goto unlock_and_return;
> > > + } else {
> > > + ret = ov2685_write_reg(client, REG_SC_CTRL_MODE,
> > > + OV2685_REG_VALUE_08BIT, SC_CTRL_MODE_STANDBY);
> > > + if (ret)
> > > + goto unlock_and_return;
> > > + }
> > > +
> > > + ov2685->streaming = on;
> > > +
> > > +unlock_and_return:
> > > + mutex_unlock(&ov2685->mutex);
> > > + return ret;
> > > +}
>
--
Kind regards,
Sakari Ailus
e-mail: sakari.ailus@xxxxxx
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
