On Wed, Jan 17, 2018 at 07:32:43PM +0100, Lucas Stach wrote:
> This is the evaluation kit board for the i.MX8M. The current level of
> support yields a working console and is able to boot userspace from
> SD card or Network.
>
> Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/nxp/Makefile | 3 +
> arch/arm64/boot/dts/nxp/imx8mq-evk.dts | 287 +++++++++++++++++++++++++++++++++
> 2 files changed, 290 insertions(+)
> create mode 100644 arch/arm64/boot/dts/nxp/Makefile
> create mode 100644 arch/arm64/boot/dts/nxp/imx8mq-evk.dts
>
> diff --git a/arch/arm64/boot/dts/nxp/Makefile b/arch/arm64/boot/dts/nxp/Makefile
> new file mode 100644
> index 000000000000..1aebb1f16708
> --- /dev/null
> +++ b/arch/arm64/boot/dts/nxp/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +dtb-$(CONFIG_SOC_IMX8MQ) += imx8m-evk.dtb
> diff --git a/arch/arm64/boot/dts/nxp/imx8mq-evk.dts b/arch/arm64/boot/dts/nxp/imx8mq-evk.dts
> new file mode 100644
> index 000000000000..ff77fdbcbfe3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/nxp/imx8mq-evk.dts
> @@ -0,0 +1,287 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +
> +/dts-v1/;
> +
> +#include "imx8mq.dtsi"
> +
> +/ {
> + model = "NXP i.MX8MQ EVK";
> + compatible = "nxp,imx8mq-evk", "nxp,imx8mq";
Documentation?
> +
> + chosen {
> + stdout-path = &uart1;
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0x00000000 0x40000000 0 0xc0000000>;
> + };
> +
> + reg_usdhc2_vmmc: usdhc2_vmmc {
Don't use '_'. Also, ideally this would follow generic node name
convention, but we don't have anything defined and regulator binding is
a bit odd. "regulator-3V3" perhaps.
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_reg_usdhc2>;
> + compatible = "regulator-fixed";
> + regulator-name = "VSD_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +};
> +
> +&fec1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec1>;
> + phy-mode = "rgmii-id";
> + status = "okay";
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +
> + pfuze100@8 {
pmic@8
Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
