On Mon, Jan 29, 2018 at 12:29:12AM +0100, Philipp Rossak wrote:
> This patch adds support for the H3 ths sensor.
>
> The H3 supports interrupts. The interrupt is configured to update the
> the sensor values every second. The calibration data is writen at the
> begin of the init process.
>
> Signed-off-by: Philipp Rossak <embed3d@xxxxxxxxx>
> ---
> drivers/iio/adc/sun4i-gpadc-iio.c | 86 +++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/sun4i-gpadc.h | 22 ++++++++++
> 2 files changed, 108 insertions(+)
>
> diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
> index b7b5451226b0..8196203d65fe 100644
> --- a/drivers/iio/adc/sun4i-gpadc-iio.c
> +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
> @@ -61,6 +61,9 @@ struct sun4i_gpadc_iio;
> static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info);
> static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info);
>
> +static int sunxi_ths_sample_start(struct sun4i_gpadc_iio *info);
> +static int sunxi_ths_sample_end(struct sun4i_gpadc_iio *info);
> +
> struct gpadc_data {
> int temp_offset;
> int temp_scale;
> @@ -71,6 +74,10 @@ struct gpadc_data {
> unsigned int temp_data[MAX_SENSOR_COUNT];
> int (*sample_start)(struct sun4i_gpadc_iio *info);
> int (*sample_end)(struct sun4i_gpadc_iio *info);
> + u32 ctrl0_map;
> + u32 ctrl2_map;
> + u32 sensor_en_map;
> + u32 filter_map;
You can use a regmap_field for that.
> u32 irq_clear_map;
> u32 irq_control_map;
> bool has_bus_clk;
> @@ -138,6 +145,31 @@ static const struct gpadc_data sun8i_a33_gpadc_data = {
> .support_irq = false,
> };
>
> +static const struct gpadc_data sun8i_h3_ths_data = {
> + .temp_offset = -1791,
> + .temp_scale = -121,
> + .temp_data = {SUN8I_H3_THS_TDATA0, 0, 0, 0},
> + .sample_start = sunxi_ths_sample_start,
> + .sample_end = sunxi_ths_sample_end,
> + .has_bus_clk = true,
> + .has_bus_rst = true,
> + .has_mod_clk = true,
> + .sensor_count = 1,
> + .supports_nvmem = true,
> + .support_irq = true,
> + .ctrl0_map = SUN4I_GPADC_CTRL0_T_ACQ(0xff),
> + .ctrl2_map = SUN8I_H3_THS_ACQ1(0x3f),
> + .sensor_en_map = SUN8I_H3_THS_TEMP_SENSE_EN0,
> + .filter_map = SUN4I_GPADC_CTRL3_FILTER_EN |
> + SUN4I_GPADC_CTRL3_FILTER_TYPE(0x2),
> + .irq_clear_map = SUN8I_H3_THS_INTS_ALARM_INT_0 |
> + SUN8I_H3_THS_INTS_SHUT_INT_0 |
> + SUN8I_H3_THS_INTS_TDATA_IRQ_0 |
> + SUN8I_H3_THS_INTS_ALARM_OFF_0,
> + .irq_control_map = SUN8I_H3_THS_INTC_TDATA_IRQ_EN0 |
> + SUN8I_H3_THS_TEMP_PERIOD(0x7),
> +};
> +
> struct sun4i_gpadc_iio {
> struct iio_dev *indio_dev;
> struct completion completion;
> @@ -462,6 +494,16 @@ static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info)
> return 0;
> }
>
> +static int sunxi_ths_sample_end(struct sun4i_gpadc_iio *info)
> +{
> + /* Disable ths interrupt */
> + regmap_write(info->regmap, SUN8I_H3_THS_INTC, 0x0);
> + /* Disable temperature sensor */
> + regmap_write(info->regmap, SUN8I_H3_THS_CTRL2, 0x0);
> +
> + return 0;
> +}
> +
> static int sun4i_gpadc_runtime_suspend(struct device *dev)
> {
> struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
> @@ -473,6 +515,17 @@ static int sun4i_gpadc_runtime_suspend(struct device *dev)
> return info->data->sample_end(info);
> }
>
> +static void sunxi_calibrate(struct sun4i_gpadc_iio *info)
> +{
> + if (info->has_calibration_data[0])
> + regmap_write(info->regmap, SUNXI_THS_CDATA_0_1,
> + info->calibration_data[0]);
> +
> + if (info->has_calibration_data[1])
> + regmap_write(info->regmap, SUNXI_THS_CDATA_2_3,
> + info->calibration_data[1]);
> +}
> +
> static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info)
> {
> /* clkin = 6MHz */
> @@ -492,6 +545,35 @@ static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info)
> return 0;
> }
>
> +static int sunxi_ths_sample_start(struct sun4i_gpadc_iio *info)
Please remain consistent with the prefixes used in the driver
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Attachment:
signature.asc
Description: PGP signature
