Amlogic Meson AXG and GXL SoCs can use the dwc3-of-simple with little modifications. These SoCs use: - a gate clock for the USB components (DWC3, USB PHYs) - a reset line which is shared across all USB components (DWC3, USB2 and USB3 PHYs, OTG detection logic inside the USB3 PHY registers) - a reset pulse to trigger the reset - depending on the SoC two or more PHYs (AXG: 1x USB2 and 1x USB3 PHY, GXL: 2x USB2 and 1x USB3 PHY) This extends the dwc3-of-simple so it supports (depending on the platform) shared and level resets. Additionally it adds new bindings for the Amlogic Meson AXG and GXL SoCs, along with the documentation (dt-bindings). NOTE: for full support on Amlogic Meson GXL SoCs my other series called "initialize (multiple) PHYs for a HCD" (see [0] for v8 of that series) is required. However, there is no direct dependency on that series. Especially since Meson AXG doesn't need it (since it only has one USB2 and one USB3 PHY, which is already supported by the current dwc3 driver, unlike the 2x USB2 and 1x USB3 PHYs on Meson GXL). So I believe that this series can still be merged, even if the other patchset is not ready yet. [0] http://lists.infradead.org/pipermail/linux-amlogic/2018-January/006274.html Martin Blumenstingl (3): dt-bindings: usb: add support for dwc3 controller on Amlogic Meson GX usb: dwc3: of-simple: add support for shared and pulsed reset lines usb: dwc3: of-simple: add support for the Amlogic Meson GXL and AXG SoCs .../devicetree/bindings/usb/amlogic,dwc3.txt | 42 ++++++++++++ drivers/usb/dwc3/dwc3-of-simple.c | 78 +++++++++++++++++++--- 2 files changed, 109 insertions(+), 11 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/amlogic,dwc3.txt -- 2.16.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
