On Tue, Jan 23, 2018 at 9:18 AM, Yong Deng <yong.deng@xxxxxxxxxxxx> wrote:
> Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2
> interface and CSI1 is used for parallel interface. This is not
> documented in datasheet but by test and guess.
>
> This patch implement a v4l2 framework driver for it.
>
> Currently, the driver only support the parallel interface. MIPI-CSI2,
> ISP's support are not included in this patch.
>
> Tested-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Yong Deng <yong.deng@xxxxxxxxxxxx>
This is cool stuff :)
> +void sun6i_csi_update_buf_addr(struct sun6i_csi *csi, dma_addr_t addr)
> +{
> + struct sun6i_csi_dev *sdev = sun6i_csi_to_dev(csi);
> + /* transform physical address to bus address */
> + dma_addr_t bus_addr = addr - PHYS_OFFSET;
I am sorry if this is an unjustified drive-by comment. Maybe you
have already investigate other ways to do this.
Accessing PHYS_OFFSET directly seems unintuitive
and not good practice.
But normally an dma_addr_t only comes from some
function inside <linux/dma-mapping.h> such as:
dma_alloc_coherent() for a contigous buffer which is coherent
in physical memory, or from some buffer <= 64KB that
is switching ownership between device and CPU explicitly
with dma_map* or so. Did you check with
Documentation/DMA-API.txt?
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
