Add support to ov772x driver for frame intervals handling and enumeration.
Tested with 10MHz and 24MHz input clock at VGA and QVGA resolutions for
10, 15 and 30 frame per second rates.
Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
drivers/media/i2c/ov772x.c | 315 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 310 insertions(+), 5 deletions(-)
diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index 912b1b9..6d46748 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -250,6 +250,7 @@
#define AEC_1p2 0x10 /* 01: 1/2 window */
#define AEC_1p4 0x20 /* 10: 1/4 window */
#define AEC_2p3 0x30 /* 11: Low 2/3 window */
+#define COM4_RESERVED 0x01 /* Reserved value */
/* COM5 */
#define AFR_ON_OFF 0x80 /* Auto frame rate control ON/OFF selection */
@@ -267,6 +268,19 @@
/* AEC max step control */
#define AEC_NO_LIMIT 0x01 /* 0 : AEC incease step has limit */
/* 1 : No limit to AEC increase step */
+/* CLKRC */
+ /* Input clock divider register */
+#define CLKRC_RESERVED 0x80 /* Reserved value */
+#define CLKRC_BYPASS 0x40 /* Bypass input clock divider */
+#define CLKRC_DIV2 0x01 /* Divide input clock by 2 */
+#define CLKRC_DIV3 0x02 /* Divide input clock by 3 */
+#define CLKRC_DIV4 0x03 /* Divide input clock by 4 */
+#define CLKRC_DIV5 0x04 /* Divide input clock by 5 */
+#define CLKRC_DIV6 0x05 /* Divide input clock by 6 */
+#define CLKRC_DIV8 0x07 /* Divide input clock by 8 */
+#define CLKRC_DIV10 0x09 /* Divide input clock by 10 */
+#define CLKRC_DIV16 0x0f /* Divide input clock by 16 */
+#define CLKRC_DIV20 0x13 /* Divide input clock by 20 */
/* COM7 */
/* SCCB Register Reset */
@@ -373,6 +387,12 @@
#define VERSION(pid, ver) ((pid<<8)|(ver&0xFF))
/*
+ * Input clock frequencies
+ */
+enum { OV772X_FIN_10MHz, OV772X_FIN_24MHz, OV772X_FIN_48MHz, OV772X_FIN_N, };
+static unsigned int ov772x_fin_vals[] = { 10000000, 24000000, 48000000 };
+
+/*
* struct
*/
@@ -391,6 +411,16 @@ struct ov772x_win_size {
struct v4l2_rect rect;
};
+struct ov772x_pclk_config {
+ u8 com4;
+ u8 clkrc;
+};
+
+struct ov772x_frame_rate {
+ unsigned int fps;
+ const struct ov772x_pclk_config pclk[OV772X_FIN_N];
+};
+
struct ov772x_priv {
struct v4l2_subdev subdev;
struct v4l2_ctrl_handler hdl;
@@ -404,6 +434,7 @@ struct ov772x_priv {
unsigned short flag_hflip:1;
/* band_filter = COM8[5] ? 256 - BDBASE : 0 */
unsigned short band_filter;
+ unsigned int fps;
};
/*
@@ -508,6 +539,154 @@ static const struct ov772x_win_size ov772x_win_sizes[] = {
};
/*
+ * frame rate settings lists
+ */
+unsigned int ov772x_frame_intervals[] = {10, 15, 30, 60};
+#define OV772X_N_FRAME_INTERVALS ARRAY_SIZE(ov772x_frame_intervals)
+
+static const struct ov772x_frame_rate vga_frame_rates[] = {
+ { /* PCLK = 7,5 MHz */
+ .fps = 10,
+ .pclk = {
+ [OV772X_FIN_10MHz] = {
+ .com4 = PLL_6x | COM4_RESERVED,
+ .clkrc = CLKRC_DIV8 | CLKRC_RESERVED,
+ },
+ [OV772X_FIN_24MHz] = {
+ .com4 = PLL_BYPASS | COM4_RESERVED,
+ .clkrc = CLKRC_DIV3 | CLKRC_RESERVED,
+ },
+ [OV772X_FIN_48MHz] = {
+ .com4 = PLL_BYPASS | COM4_RESERVED,
+ .clkrc = CLKRC_DIV6 | CLKRC_RESERVED,
+ },
+ },
+ },
+ { /* PCLK = 12 MHz */
+ .fps = 15,
+ .pclk = {
+ [OV772X_FIN_10MHz] = {
+ .com4 = PLL_4x | COM4_RESERVED,
+ .clkrc = CLKRC_DIV3 | CLKRC_RESERVED,
+ },
+ [OV772X_FIN_24MHz] = {
+ .com4 = PLL_BYPASS | COM4_RESERVED,
+ .clkrc = CLKRC_DIV2 | CLKRC_RESERVED,
+ },
+ [OV772X_FIN_48MHz] = {
+ .com4 = PLL_BYPASS | COM4_RESERVED,
+ .clkrc = CLKRC_DIV4 | CLKRC_RESERVED,
+ },
+ },
+ },
+ { /* PCLK = 24 MHz */
+ .fps = 30,
+ .pclk = {
+ [OV772X_FIN_10MHz] = {
+ .com4 = PLL_8x | COM4_RESERVED,
+ .clkrc = CLKRC_DIV3 | CLKRC_RESERVED,
+ },
+ [OV772X_FIN_24MHz] = {
+ .com4 = PLL_BYPASS | COM4_RESERVED,
+ .clkrc = CLKRC_BYPASS | CLKRC_RESERVED,
+ },
+ [OV772X_FIN_48MHz] = {
+ .com4 = PLL_BYPASS | COM4_RESERVED,
+ .clkrc = CLKRC_DIV2 | CLKRC_RESERVED,
+ },
+ },
+ },
+ { /* PCLK = 48 MHz */
+ .fps = 60,
+ .pclk = {
+ [OV772X_FIN_10MHz] = {
+ .com4 = PLL_8x | COM4_RESERVED,
+ .clkrc = CLKRC_DIV2 | CLKRC_RESERVED,
+ },
+ [OV772X_FIN_24MHz] = {
+ .com4 = PLL_4x | COM4_RESERVED,
+ .clkrc = CLKRC_DIV2 | CLKRC_RESERVED,
+ },
+ [OV772X_FIN_48MHz] = {
+ .com4 = PLL_BYPASS | COM4_RESERVED,
+ .clkrc = CLKRC_BYPASS | CLKRC_RESERVED,
+ },
+ },
+ },
+};
+
+static const struct ov772x_frame_rate qvga_frame_rates[] = {
+ { /* PCLK = 3,2 MHz */
+ .fps = 10,
+ .pclk = {
+ [OV772X_FIN_10MHz] = {
+ .com4 = PLL_6x | COM4_RESERVED,
+ .clkrc = CLKRC_DIV16 | CLKRC_RESERVED,
+ },
+ [OV772X_FIN_24MHz] = {
+ .com4 = PLL_BYPASS | COM4_RESERVED,
+ .clkrc = CLKRC_DIV8 | CLKRC_RESERVED,
+ },
+ [OV772X_FIN_48MHz] = {
+ .com4 = PLL_BYPASS | COM4_RESERVED,
+ .clkrc = CLKRC_DIV16 | CLKRC_RESERVED,
+ },
+ },
+ },
+ { /* PCLK = 4,8 MHz */
+ .fps = 15,
+ .pclk = {
+ [OV772X_FIN_10MHz] = {
+ .com4 = PLL_BYPASS | COM4_RESERVED,
+ .clkrc = CLKRC_DIV2 | CLKRC_RESERVED,
+ },
+ [OV772X_FIN_24MHz] = {
+ .com4 = PLL_BYPASS | COM4_RESERVED,
+ .clkrc = CLKRC_DIV5 | CLKRC_RESERVED,
+ },
+ [OV772X_FIN_48MHz] = {
+ .com4 = PLL_BYPASS | COM4_RESERVED,
+ .clkrc = CLKRC_DIV10 | CLKRC_RESERVED,
+ },
+ },
+ },
+ { /* PCLK = 9,6 MHz */
+ .fps = 30,
+ .pclk = {
+ [OV772X_FIN_10MHz] = {
+ .com4 = PLL_BYPASS | COM4_RESERVED,
+ .clkrc = CLKRC_BYPASS | CLKRC_RESERVED,
+ },
+ [OV772X_FIN_24MHz] = {
+ .com4 = PLL_4x | COM4_RESERVED,
+ .clkrc = CLKRC_DIV10 | CLKRC_RESERVED,
+ },
+ [OV772X_FIN_48MHz] = {
+ .com4 = PLL_4x | COM4_RESERVED,
+ .clkrc = CLKRC_DIV20 | CLKRC_RESERVED,
+ },
+ },
+ },
+ { /* PCLK = 19 MHz */
+ .fps = 60,
+ .pclk = {
+ [OV772X_FIN_10MHz] = {
+ .com4 = PLL_4x | COM4_RESERVED,
+ .clkrc = CLKRC_DIV2 | CLKRC_RESERVED,
+ },
+ [OV772X_FIN_24MHz] = {
+ .com4 = PLL_6x | COM4_RESERVED,
+ .clkrc = CLKRC_DIV8 | CLKRC_RESERVED,
+ },
+ [OV772X_FIN_48MHz] = {
+ .com4 = PLL_6x | COM4_RESERVED,
+ .clkrc = CLKRC_DIV16 | CLKRC_RESERVED,
+ },
+ },
+ },
+};
+
+/*
* general function
*/
@@ -574,6 +753,102 @@ static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
return 0;
}
+/*
+ * Approximate input clock frequency to the closes possible one used to
+ * calculate pixel clock settings.
+ */
+static int ov772x_get_fin(struct ov772x_priv *priv)
+{
+ unsigned int clk_rate = clk_get_rate(priv->clk);
+ unsigned int rate_prev = ~0L;
+ unsigned int rate;
+ unsigned int idx;
+ unsigned int i;
+
+ for (i = 0, idx = 0; i < OV772X_FIN_N; i++) {
+ rate = abs(ov772x_fin_vals[i] - clk_rate);
+ if (rate < rate_prev) {
+ rate_prev = rate;
+ idx = i;
+ }
+ }
+
+ return idx;
+}
+
+static int ov772x_set_frame_rate(struct ov772x_priv *priv,
+ struct v4l2_fract *tpf, unsigned int fin,
+ const struct ov772x_win_size *win)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+ unsigned int fps = tpf->denominator / tpf->numerator;
+ const struct ov772x_frame_rate *frate;
+ const struct ov772x_pclk_config *pclk;
+ unsigned int rate_prev = ~0L;
+ unsigned int rate;
+ unsigned int idx;
+ unsigned int i;
+ int ret;
+
+ if (win->rect.width == VGA_WIDTH &&
+ win->rect.height == VGA_HEIGHT)
+ frate = vga_frame_rates;
+ else if (win->rect.width == QVGA_WIDTH &&
+ win->rect.height == QVGA_HEIGHT)
+ frate = qvga_frame_rates;
+ else
+ return -EINVAL;
+
+ /* Approximate to the closest possible frame interval. */
+ for (i = 0, idx = 0; i < OV772X_N_FRAME_INTERVALS; i++) {
+ rate = abs(fps - frate[i].fps);
+ if (rate < rate_prev) {
+ idx = i;
+ rate_prev = rate;
+ }
+ }
+
+ pclk = &frate[idx].pclk[fin];
+
+ ret = ov772x_write(client, COM4, pclk->com4);
+ if (ret < 0)
+ return ret;
+
+ ret = ov772x_write(client, CLKRC, pclk->clkrc);
+ if (ret < 0)
+ return ret;
+
+ tpf->numerator = 1;
+ tpf->denominator = frate[idx].fps;
+ priv->fps = tpf->denominator;
+
+ return 0;
+}
+
+static int ov772x_g_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_frame_interval *ival)
+{
+ struct ov772x_priv *priv = to_ov772x(sd);
+ struct v4l2_fract *tpf = &ival->interval;
+
+ memset(ival->reserved, 0, sizeof(ival->reserved));
+ tpf->numerator = 1;
+ tpf->denominator = priv->fps;
+
+ return 0;
+}
+
+static int ov772x_s_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_frame_interval *ival)
+{
+ struct ov772x_priv *priv = to_ov772x(sd);
+ struct v4l2_fract *tpf = &ival->interval;
+
+ memset(ival->reserved, 0, sizeof(ival->reserved));
+
+ return ov772x_set_frame_rate(priv, tpf,
+ ov772x_get_fin(priv), priv->win);
+}
static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct ov772x_priv *priv = container_of(ctrl->handler,
@@ -757,6 +1032,7 @@ static int ov772x_set_params(struct ov772x_priv *priv,
const struct ov772x_win_size *win)
{
struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+ struct v4l2_fract tpf;
int ret;
u8 val;
@@ -885,6 +1161,13 @@ static int ov772x_set_params(struct ov772x_priv *priv,
if (ret < 0)
goto ov772x_set_fmt_error;
+ /* COM4, CLKRC: Set pixel clock and framerate. */
+ tpf.numerator = 1;
+ tpf.denominator = priv->fps;
+ ret = ov772x_set_frame_rate(priv, &tpf, ov772x_get_fin(priv), win);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+
/*
* set COM8
*/
@@ -1040,6 +1323,24 @@ static const struct v4l2_subdev_core_ops ov772x_subdev_core_ops = {
.s_power = ov772x_s_power,
};
+static int ov772x_enum_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_interval_enum *fie)
+{
+ if (fie->pad || fie->index >= OV772X_N_FRAME_INTERVALS)
+ return -EINVAL;
+
+ if (fie->width != VGA_WIDTH && fie->width != QVGA_WIDTH)
+ return -EINVAL;
+ if (fie->height != VGA_HEIGHT && fie->height != QVGA_HEIGHT)
+ return -EINVAL;
+
+ fie->interval.numerator = 1;
+ fie->interval.denominator = ov772x_frame_intervals[fie->index];
+
+ return 0;
+}
+
static int ov772x_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_mbus_code_enum *code)
@@ -1052,14 +1353,17 @@ static int ov772x_enum_mbus_code(struct v4l2_subdev *sd,
}
static const struct v4l2_subdev_video_ops ov772x_subdev_video_ops = {
- .s_stream = ov772x_s_stream,
+ .s_stream = ov772x_s_stream,
+ .s_frame_interval = ov772x_s_frame_interval,
+ .g_frame_interval = ov772x_g_frame_interval,
};
static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = {
- .enum_mbus_code = ov772x_enum_mbus_code,
- .get_selection = ov772x_get_selection,
- .get_fmt = ov772x_get_fmt,
- .set_fmt = ov772x_set_fmt,
+ .enum_frame_interval = ov772x_enum_frame_interval,
+ .enum_mbus_code = ov772x_enum_mbus_code,
+ .get_selection = ov772x_get_selection,
+ .get_fmt = ov772x_get_fmt,
+ .set_fmt = ov772x_set_fmt,
};
static const struct v4l2_subdev_ops ov772x_subdev_ops = {
@@ -1131,6 +1435,7 @@ static int ov772x_probe(struct i2c_client *client,
priv->cfmt = &ov772x_cfmts[0];
priv->win = &ov772x_win_sizes[0];
+ priv->fps = 15;
ret = v4l2_async_register_subdev(&priv->subdev);
if (ret)
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
