2018-01-23 18:03 GMT+01:00 Adam Ford <aford173@xxxxxxxxx>: > On Tue, Jan 23, 2018 at 10:06 AM, David Lechner <david@xxxxxxxxxxxxxx> wrote: >> On 01/23/2018 10:03 AM, David Lechner wrote: >>> >>> You can see if the clock is enabled by running: >>> >>> cat /sys/kernel/debug/clk/clk_summary >>> >> >> I just realized if you can't boot, you can't do this. :-/ > > I can boot with the latest set in your git repo, but the Ethernet > doesn't apparently fully operate. I don't get errors, but I cannot > get a dhcp address. > > I'll try to do a more exhaustive test later today to get an idea of > what works and what doesn't. When I ran my basic tests, I just did a > feel-good boot test (and reboot test) > > adam FYI: manually calling clk_prepare_enable() in the davinci_mdio driver seems to at least fix the ethernet. In master branch it's done by pm_runtime_get_sync() (in davinci_mdio_reset()). However I'm still getting several oopses and WARNs so there's some more work to do. Thanks, Bartosz -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
