On 01/23/2018 07:03 AM, Sebastian Reichel wrote: > This adds support for enabling the internal PHY for a 'cpu' port. > It has been tested on GE B850v3, B650v3 and B450v3, which have a > built-in MV88E6240 switch hardwired to a PCIe based network card. > On these machines the internal PHY of the i210 network card and > the Marvell switch are connected to each other and must be enabled > for properly using the switch. While the i210 PHY will be enabled > when the network interface is enabled, the switch's port is not > exposed as network interface. Additionally the mv88e6xxx driver > resets the chip during probe, so the PHY is disabled without this > patch. This looks good now, thanks for your patience Sebastian! > > Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx> Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx> -- Florian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
