RE: [PATCH 0/2] Use demuxer for i2c1 and i2c5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

> Subject: Re: [PATCH 0/2] Use demuxer for i2c1 and i2c5
>
>
> > > > On top of renesas-dev branch, I am using the below i2c-rcar driver
> > > > related
> > > patches.
> > > >
> > > > https://www.mail-archive.com/linux-renesas-soc@xxxxxxxxxxxxxxx/msg
> > > > 2227
> > > > 8.html
> > >
> > > Those should be enough. They are not?
> >
> > Yes. I have tested without demuxer patches, I confirm, it can recover the bus.
>
> That is great news! Thanks for the additional testing. I was a little worried that
> the 'bus stalled' detection might have failed for you, but it seems it works for
> your case as well.
>
> With that put aside, it is still valid, to add the demuxer to the DTS file in case you
> want to switch to bitbanged GPIO at runtime for some reason. Only the commit
> message would need updating then, however, because it is not relevant for bus
> recovery.

Ok. I will fix the commit message and send v2.

Regards,
Biju



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux