On Tue, Jan 23, 2018 at 09:04:37AM +0800, Shawn Guo wrote:
> From: Jianguo Sun <sunjianguo1@xxxxxxxxxx>
>
> Besides the GPIO for controlling reset, there is also possibly another
> GPIO for turning on/off the power of PCIe slot. Let's add the support
> for that with another optional device tree property 'power-gpios'.
>
> Signed-off-by: Jianguo Sun <sunjianguo1@xxxxxxxxxx>
> Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> ---
> .../bindings/pci/hisilicon-histb-pcie.txt | 1 +
> drivers/pci/dwc/pcie-histb.c | 28 +++++++++++++++++++---
> 2 files changed, 26 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
> index c84bc027930b..597397a048f8 100644
> --- a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
> @@ -33,6 +33,7 @@ Required properties
> "bus": bus reset.
>
> Optional properties:
> +- power-gpios: The gpio to control the power of PCIe slot.
> - reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal.
> - phys: List of phandle and phy mode specifier, should be 0.
> - phy-names: Must be "phy".
> diff --git a/drivers/pci/dwc/pcie-histb.c b/drivers/pci/dwc/pcie-histb.c
> index 33b01b734d7d..2a6b18619b25 100644
> --- a/drivers/pci/dwc/pcie-histb.c
> +++ b/drivers/pci/dwc/pcie-histb.c
> @@ -63,6 +63,7 @@ struct histb_pcie {
> struct reset_control *sys_reset;
> struct reset_control *bus_reset;
> void __iomem *ctrl;
> + int power_gpio;
> int reset_gpio;
> };
>
> @@ -230,6 +231,8 @@ static void histb_pcie_host_disable(struct histb_pcie *hipcie)
>
> if (gpio_is_valid(hipcie->reset_gpio))
> gpio_set_value_cansleep(hipcie->reset_gpio, 0);
> + if (gpio_is_valid(hipcie->power_gpio))
> + gpio_set_value_cansleep(hipcie->power_gpio, 0);
> }
>
> static int histb_pcie_host_enable(struct pcie_port *pp)
> @@ -240,8 +243,14 @@ static int histb_pcie_host_enable(struct pcie_port *pp)
> int ret;
>
> /* power on PCIe device if have */
> - if (gpio_is_valid(hipcie->reset_gpio))
> + if (gpio_is_valid(hipcie->power_gpio))
> + gpio_set_value_cansleep(hipcie->power_gpio, 1);
> +
> + if (gpio_is_valid(hipcie->reset_gpio)) {
> + gpio_set_value_cansleep(hipcie->reset_gpio, 0);
> + mdelay(10);
> gpio_set_value_cansleep(hipcie->reset_gpio, 1);
> + }
>
> ret = clk_prepare_enable(hipcie->bus_clk);
> if (ret) {
> @@ -335,15 +344,28 @@ static int histb_pcie_probe(struct platform_device *pdev)
> return PTR_ERR(pci->dbi_base);
> }
>
> + hipcie->power_gpio = of_get_named_gpio_flags(np,
> + "power-gpios", 0, &of_flags);
> + if (of_flags & OF_GPIO_ACTIVE_LOW)
> + flag |= GPIOF_ACTIVE_LOW;
Why isn't this inside the if statement?
> + if (gpio_is_valid(hipcie->power_gpio)) {
> + ret = devm_gpio_request_one(dev, hipcie->power_gpio,
> + flag, "PCIe device power control");
> + if (ret) {
> + dev_err(dev, "unable to request power gpio\n");
> + return ret;
> + }
> + }
> +
> hipcie->reset_gpio = of_get_named_gpio_flags(np,
> "reset-gpios", 0, &of_flags);
> if (of_flags & OF_GPIO_ACTIVE_LOW)
> flag |= GPIOF_ACTIVE_LOW;
> if (gpio_is_valid(hipcie->reset_gpio)) {
> ret = devm_gpio_request_one(dev, hipcie->reset_gpio,
> - flag, "PCIe device power control");
> + flag, "PCIe device reset control");
> if (ret) {
> - dev_err(dev, "unable to request gpio\n");
> + dev_err(dev, "unable to request reset gpio\n");
> return ret;
> }
> }
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
