Hello Lothar,
Le Tue, 23 Jan 2018 09:04:14 +0100,
Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx> a écrit :
> Hi,
>
> On Mon, 22 Jan 2018 09:42:08 -0800 Dmitry Torokhov wrote:
> > Hi Mylène,
> >
> > On Thu, Dec 28, 2017 at 8:33 AM, Mylène Josserand
> > <mylene.josserand@xxxxxxxxxxxxxxxxxx> wrote:
> > > Add the support of regulator to use it as VCC source.
> > >
> > > Signed-off-by: Mylène Josserand <mylene.josserand@xxxxxxxxxxxxxxxxxx>
> > > ---
> > > .../bindings/input/touchscreen/edt-ft5x06.txt | 1 +
> > > drivers/input/touchscreen/edt-ft5x06.c | 33 ++++++++++++++++++++++
> > > 2 files changed, 34 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
> > > index 025cf8c9324a..48e975b9c1aa 100644
> > > --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
> > > +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
> > > @@ -30,6 +30,7 @@ Required properties:
> > > Optional properties:
> > > - reset-gpios: GPIO specification for the RESET input
> > > - wake-gpios: GPIO specification for the WAKE input
> > > + - vcc-supply: Regulator that supplies the touchscreen
> > >
> > > - pinctrl-names: should be "default"
> > > - pinctrl-0: a phandle pointing to the pin settings for the
> > > diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
> > > index c53a3d7239e7..5ee14a25a382 100644
> > > --- a/drivers/input/touchscreen/edt-ft5x06.c
> > > +++ b/drivers/input/touchscreen/edt-ft5x06.c
> > > @@ -39,6 +39,7 @@
> > > #include <linux/input/mt.h>
> > > #include <linux/input/touchscreen.h>
> > > #include <linux/of_device.h>
> > > +#include <linux/regulator/consumer.h>
> > >
> > > #define WORK_REGISTER_THRESHOLD 0x00
> > > #define WORK_REGISTER_REPORT_RATE 0x08
> > > @@ -91,6 +92,7 @@ struct edt_ft5x06_ts_data {
> > > struct touchscreen_properties prop;
> > > u16 num_x;
> > > u16 num_y;
> > > + struct regulator *vcc;
> > >
> > > struct gpio_desc *reset_gpio;
> > > struct gpio_desc *wake_gpio;
> > > @@ -993,6 +995,23 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
> > >
> > > tsdata->max_support_points = chip_data->max_support_points;
> > >
> > > + tsdata->vcc = devm_regulator_get(&client->dev, "vcc");
> > > + if (IS_ERR(tsdata->vcc)) {
> > > + error = PTR_ERR(tsdata->vcc);
> > > + dev_err(&client->dev, "failed to request regulator: %d\n",
> > > + error);
> >
> I would check for -EPROBE_DEFER here and omit the error message in this
> case.
>
>
> Lothar Waßmann
Sure, I will add this case, thank you for the review.
Best regards,
--
Mylène Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
