These are the GPIO line names on a Nintendo Wii, as documented in: https://wiibrew.org/wiki/Hardware/Hollywood_GPIOs Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> --- v2: - no change --- arch/powerpc/boot/dts/wii.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/powerpc/boot/dts/wii.dts b/arch/powerpc/boot/dts/wii.dts index 7235e375919c..07d5e84e98b1 100644 --- a/arch/powerpc/boot/dts/wii.dts +++ b/arch/powerpc/boot/dts/wii.dts @@ -178,6 +178,14 @@ gpio-controller; ngpios = <24>; + gpio-line-names = + "POWER", "SHUTDOWN", "FAN", "DC_DC", + "DI_SPIN", "SLOT_LED", "EJECT_BTN", "SLOT_IN", + "SENSOR_BAR", "DO_EJECT", "EEP_CS", "EEP_CLK", + "EEP_MOSI", "EEP_MISO", "AVE_SCL", "AVE_SDA", + "DEBUG0", "DEBUG1", "DEBUG2", "DEBUG3", + "DEBUG4", "DEBUG5", "DEBUG6", "DEBUG7"; + /* * This is commented out while a standard binding * for i2c over gpio is defined. -- 2.15.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html