On 20 January 2018 at 06:11, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Fri, Jan 12, 2018 at 06:18:21PM +0800, Chunyan Zhang wrote:
>> Some systems need to set regulators to specific states when they enter
>> low power modes, especially around CPUs. There are many of these modes
>> depending on the particular runtime state.
>>
>> Currently the regulator consumers are not granted permission to change
>> suspend state of regulator devices, the constraints are configured at
>> startup. In order to allow changes in a vlotage range, we need to add
>> new properties for voltage range and a flag to give permission to
>> change the suspend voltage and suspend on/off in suspend mode.
>>
>> Signed-off-by: Chunyan Zhang <zhang.chunyan@xxxxxxxxxx>
>> ---
>> Documentation/devicetree/bindings/regulator/regulator.txt | 15 +++++++++++++--
>> 1 file changed, 13 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
>> index 378f6dc..532e286 100644
>> --- a/Documentation/devicetree/bindings/regulator/regulator.txt
>> +++ b/Documentation/devicetree/bindings/regulator/regulator.txt
>> @@ -42,8 +42,19 @@ Optional properties:
>> - regulator-state-[mem/disk] node has following common properties:
>> - regulator-on-in-suspend: regulator should be on in suspend state.
>> - regulator-off-in-suspend: regulator should be off in suspend state.
>> - - regulator-suspend-microvolt: regulator should be set to this voltage
>> - in suspend.
>> + - regulator-suspend-min-microvolt: minimum voltage may be set in
>> + suspend state.
>> + - regulator-suspend-max-microvolt: maximum voltage may be set in
>> + suspend state.
>> + - regulator-suspend-microvolt: the default voltage which regulator
>> + would be set in suspend. The voltage for suspend also can be
>> + adjusted among {regulator-suspend-min-microvolt,
>> + regulator-suspend-max-microvolt} by calling
>> + regulator_set_suspend_voltage(). This property is now deprecated,
>> + setting voltage for suspend mode via API the regulator driver
>> + provides is recommended.
>
> Please reword. This is Linux implementation details that shouldn't be in
> the binding.
Ok, I guess just updating this one instead of the whole patchset for
this minor modification should be fine.
>
>> + - regulator-changeable-in-suspend: whether the default voltage and
>> + the regulator on/off in suspend can be changed in runtime.
>> - regulator-mode: operating mode in the given suspend state.
>> The set of possible operating modes depends on the capabilities of
>> every hardware so the valid modes are documented on each regulator
>> --
>> 2.7.4
>>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
