Hi Paul,
On 30 December 2017 at 19:21, Paul Cercueil <paul@xxxxxxxxxxxxxxx> wrote:
> The watchdog driver can restart the system by simply configuring the
> hardware for a timeout of 0 seconds.
>
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> ---
> drivers/watchdog/jz4740_wdt.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> v2: No change
>
> diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c
> index 92d6ca8ceb49..fa7f49a3212c 100644
> --- a/drivers/watchdog/jz4740_wdt.c
> +++ b/drivers/watchdog/jz4740_wdt.c
> @@ -130,6 +130,14 @@ static int jz4740_wdt_stop(struct watchdog_device *wdt_dev)
> return 0;
> }
>
> +static int jz4740_wdt_restart(struct watchdog_device *wdt_dev,
> + unsigned long action, void *data)
> +{
> + wdt_dev->timeout = 0;
> + jz4740_wdt_start(wdt_dev);
> + return 0;
> +}
> +
> static const struct watchdog_info jz4740_wdt_info = {
> .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> .identity = "jz4740 Watchdog",
> @@ -141,6 +149,7 @@ static const struct watchdog_ops jz4740_wdt_ops = {
> .stop = jz4740_wdt_stop,
> .ping = jz4740_wdt_ping,
> .set_timeout = jz4740_wdt_set_timeout,
> + .restart = jz4740_wdt_restart,
> };
>
> #ifdef CONFIG_OF
> --
> 2.11.0
>
>
Noticed that min_timeout of the watchdog device is set to 1 but this
function calls start with timeout set to 0. Even though this works I
feel it is better to set min_timeout to 0.
Regards,
PrasannaKumar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
