On Fri, Jan 12, 2018 at 04:22:49PM +0200, Claudiu Beznea wrote: > pwm-cells should be at least 2 to provide channel number and period value. > > Cc: Mike Dunn <mikedunn@xxxxxxxxxxx> > Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/pwm/pxa-pwm.txt | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pwm/pxa-pwm.txt b/Documentation/devicetree/bindings/pwm/pxa-pwm.txt > index 5ae9f1e3c338..a0e20edeeebc 100644 > --- a/Documentation/devicetree/bindings/pwm/pxa-pwm.txt > +++ b/Documentation/devicetree/bindings/pwm/pxa-pwm.txt > @@ -10,7 +10,7 @@ Required properties: > Note that one device instance must be created for each PWM that is used, so the > length covers only the register window for one PWM output, not that of the > entire PWM controller. Currently length is 0x10 for all supported devices. > -- #pwm-cells: Should be 1. This cell is used to specify the period in > +- #pwm-cells: Should be 2. This cell is used to specify the period in > nanoseconds. What's the new cell? channel? Does the PXA PWM have more than one channel? If not, then you shouldn't add a cell. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
