On Thu, Jan 11, 2018 at 05:32:12PM +0800, Wen He wrote:
> add NXP Layerscape queue direct memory access controller(qDMA) support.
> This module can be found on NXP QorIQ Layerscape Socs.
>
> Signed-off-by: Wen He <wen.he_1@xxxxxxx>
> ---
> change in v3:
> - no change
>
> change in v2:
> - Remove indentation
> - Add "Should be" before 'fsl,ls1021a-qdma'
> - Replace 'channels' by 'dma-channels'
> - Replace 'qdma@8390000' by 'dma-controller@8390000'
>
> Documentation/devicetree/bindings/dma/fsl-qdma.txt | 40 ++++++++++++++++++++
> 1 files changed, 40 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/dma/fsl-qdma.txt
>
> diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.txt b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
> new file mode 100644
> index 0000000..000472b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
> @@ -0,0 +1,40 @@
> +* NXP Layerscape queue Direct Memory Access Controller(qDMA) Controller
> +
> +The qDMA controller transfers blocks of data between one source and one or more
> +destinations. The blocks of data transferred can be represented in memory as contiguous
> +or non-contiguous using scatter/gather table(s). Channel virtualization is supported
> +through enqueuing of DMA jobs to, or dequeuing DMA jobs from, different work
> +queues.
> +
> +* qDMA Controller
> +Required properties:
> +- compatible : Should be "fsl,ls1021a-qdma" or "fsl,ls1043a-qdma", "fsl,ls1021a-qdma"
Please format exactly as I showed in v1.
> +- reg : Specifies base physical address(s) and size of the qDMA registers.
> + The region is qDMA control register's address and size.
> +- interrupts : A list of interrupt-specifiers, one for each entry in
> + interrupt-names.
> +- interrupt-names : Should contain:
> + "qdma-error" - the error interrupt
> + "qdma-queue" - the queue interrupt
> +- dma-channels : Number of DMA channels supported by the controller
> +- queues : Number of queues supported by driver
> +
> +Optional properties:
> +- big-endian: If present registers and hardware scatter/gather descriptors
> + of the qDMA are implemented in big endian mode, otherwise in little
> + mode.
> +
> +
> +Examples:
> +
> + qdma: dma-controller@8390000 {
> + compatible = "fsl,ls1021a-qdma";
> + reg = <0x0 0x8398000 0x0 0x2000 /* Controller registers */
> + 0x0 0x839a000 0x0 0x2000>; /* Block registers */
> + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "qdma-error", "qdma-queue";
> + dma-channels = <8>;
> + queues = <2>;
> + big-endian;
> + };
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
