Hi Tomasz,
Thanks for your reply.
On 01/19/2018 11:23 AM, Tomasz Figa wrote:
On Thu, Jan 18, 2018 at 8:52 PM, Jeffy Chen <jeffy.chen@xxxxxxxxxxxxxx> wrote:
Add clocks in vop iommu nodes, since we are going to control clocks in
rockchip iommu driver.
Signed-off-by: Jeffy Chen <jeffy.chen@xxxxxxxxxxxxxx>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/rk3036.dtsi | 2 ++
arch/arm/boot/dts/rk3288.dtsi | 4 ++++
2 files changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 3b704cfed69a..95b0ebc7a40f 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -197,6 +197,8 @@
reg = <0x10118300 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vop_mmu";
+ clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
We should remove clock-names from IOMMU nodes. The Rockchip IOMMU
bindings don't define clock names and only the clocks property should
be given.
hmmm, i'm trying to switch to clk_bulk APIs, the get and put are name
based. or maybe i can use clk_get/put along with other clk_bulk APIs
Not even saying that the names currently listed are not good examples,
they name SoC clock controller output, rather than device inputs.
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
