Re: [PATCH v3 6/6] PCI: cadence: Add host driver for Cadence PCIe controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Kishon,

Le 16/01/2018 à 12:16, Kishon Vijay Abraham I a écrit :
> Hi Cyrille,
> 
> On Thursday 11 January 2018 04:17 AM, Cyrille Pitchen wrote:
>> This patch adds support to the Cadence PCIe controller in host mode.
>>
>> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxxxxxxxxxxx>
>> ---
>>  MAINTAINERS                             |   7 +
>>  drivers/pci/Kconfig                     |   1 +
>>  drivers/pci/Makefile                    |   1 +
>>  drivers/pci/cadence/Kconfig             |  16 ++
>>  drivers/pci/cadence/Makefile            |   3 +
>>  drivers/pci/cadence/pcie-cadence-host.c | 336 ++++++++++++++++++++++++++++++++
>>  drivers/pci/cadence/pcie-cadence.c      |  68 +++++++
>>  drivers/pci/cadence/pcie-cadence.h      | 196 +++++++++++++++++++
>>  8 files changed, 628 insertions(+)
>>  create mode 100644 drivers/pci/cadence/Kconfig
>>  create mode 100644 drivers/pci/cadence/Makefile
>>  create mode 100644 drivers/pci/cadence/pcie-cadence-host.c
>>  create mode 100644 drivers/pci/cadence/pcie-cadence.c
>>  create mode 100644 drivers/pci/cadence/pcie-cadence.h
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 13945646b95d..cc24c74a946e 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -10402,6 +10402,13 @@ S:	Maintained
>>  F:	Documentation/devicetree/bindings/pci/pci-armada8k.txt
>>  F:	drivers/pci/dwc/pcie-armada8k.c
>>  
>> +PCI DRIVER FOR CADENCE PCIE IP
>> +M:	Alan Douglas <adouglas@xxxxxxxxxxx>
>> +L:	linux-pci@xxxxxxxxxxxxxxx
>> +S:	Maintained
>> +F:	Documentation/devicetree/bindings/pci/cdns,*.txt
>> +F:	drivers/pci/cadence/pcie-cadence*
>> +
>>  PCI DRIVER FOR FREESCALE LAYERSCAPE
>>  M:	Minghuan Lian <minghuan.Lian@xxxxxxxxxxxxx>
>>  M:	Mingkai Hu <mingkai.hu@xxxxxxxxxxxxx>
>> diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
>> index 7eeb969ab86a..dee90cc1dcaf 100644
>> --- a/drivers/pci/Kconfig
>> +++ b/drivers/pci/Kconfig
>> @@ -136,6 +136,7 @@ config PCI_HYPERV
>>            PCI devices from a PCI backend to support PCI driver domains.
>>  
>>  source "drivers/pci/hotplug/Kconfig"
>> +source "drivers/pci/cadence/Kconfig"
>>  source "drivers/pci/dwc/Kconfig"
>>  source "drivers/pci/host/Kconfig"
>>  source "drivers/pci/endpoint/Kconfig"
>> diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
>> index ddb5aa6640d7..941970936840 100644
>> --- a/drivers/pci/Makefile
>> +++ b/drivers/pci/Makefile
>> @@ -56,5 +56,6 @@ obj-y += switch/
>>  obj-$(CONFIG_PCI_ENDPOINT)	+= endpoint/
>>  
>>  # Endpoint library must be initialized before its users
>> +obj-$(CONFIG_PCIE_CADENCE)	+= cadence/
>>  # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
>>  obj-y				+= dwc/
>> diff --git a/drivers/pci/cadence/Kconfig b/drivers/pci/cadence/Kconfig
>> new file mode 100644
>> index 000000000000..0123d384a628
>> --- /dev/null
>> +++ b/drivers/pci/cadence/Kconfig
>> @@ -0,0 +1,16 @@
>> +menu "Cadence PCIe controllers support"
>> +
>> +config PCIE_CADENCE
>> +	bool
>> +
>> +config PCIE_CADENCE_HOST
>> +	bool "Cadence PCIe host controller"
>> +	depends on OF
>> +	select IRQ_DOMAIN
>> +	select PCIE_CADENCE
>> +	help
>> +	  Say Y here if you want to support the Cadence PCIe controller in host
>> +	  mode. This PCIe controller may be embedded into many different vendors
>> +	  SoCs.
>> +
>> +endmenu
>> diff --git a/drivers/pci/cadence/Makefile b/drivers/pci/cadence/Makefile
>> new file mode 100644
>> index 000000000000..589601a8ff89
>> --- /dev/null
>> +++ b/drivers/pci/cadence/Makefile
>> @@ -0,0 +1,3 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +obj-$(CONFIG_PCIE_CADENCE) += pcie-cadence.o
>> +obj-$(CONFIG_PCIE_CADENCE_HOST) += pcie-cadence-host.o
>> diff --git a/drivers/pci/cadence/pcie-cadence-host.c b/drivers/pci/cadence/pcie-cadence-host.c
>> new file mode 100644
>> index 000000000000..26caf8963e3c
>> --- /dev/null
>> +++ b/drivers/pci/cadence/pcie-cadence-host.c
>> @@ -0,0 +1,336 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// Copyright (c) 2017 Cadence
>> +// Cadence PCIe host controller driver.
>> +// Author: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxxxxxxxxxxx>
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_pci.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pm_runtime.h>
>> +
>> +#include "pcie-cadence.h"
>> +
>> +/**
>> + * struct cdns_pcie_rc - private data for this PCIe Root Complex driver
>> + * @pcie: Cadence PCIe controller
>> + * @dev: pointer to PCIe device
>> + * @cfg_res: start/end offsets in the physical system memory to map PCI
>> + *           configuration space accesses
>> + * @bus_range: first/last buses behind the PCIe host controller
>> + * @cfg_base: IO mapped window to access the PCI configuration space of a
>> + *            single function at a time
>> + * @max_regions: maximum number of regions supported by the hardware
>> + * @no_bar_nbits: Number of bits to keep for inbound (PCIe -> CPU) address
>> + *                translation (nbits sets into the "no BAR match" register)
>> + * @vendor_id: PCI vendor ID
>> + * @device_id: PCI device ID
>> + */
>> +struct cdns_pcie_rc {
>> +	struct cdns_pcie	pcie;
>> +	struct device		*dev;
>> +	struct resource		*cfg_res;
>> +	struct resource		*bus_range;
>> +	void __iomem		*cfg_base;
>> +	u32			max_regions;
>> +	u32			no_bar_nbits;
>> +	u16			vendor_id;
>> +	u16			device_id;
>> +};
>> +
>> +static void __iomem *cdns_pci_map_bus(struct pci_bus *bus, unsigned int devfn,
>> +				      int where)
>> +{
>> +	struct pci_host_bridge *bridge = pci_find_host_bridge(bus);
>> +	struct cdns_pcie_rc *rc = pci_host_bridge_priv(bridge);
>> +	struct cdns_pcie *pcie = &rc->pcie;
>> +	unsigned int busn = bus->number;
>> +	u32 addr0, desc0;
>> +
>> +	if (busn == rc->bus_range->start) {
>> +		/*
>> +		 * Only the root port (devfn == 0) is connected to this bus.
>> +		 * All other PCI devices are behind some bridge hence on another
>> +		 * bus.
>> +		 */
>> +		if (devfn)
>> +			return NULL;
>> +
>> +		return pcie->reg_base + (where & 0xfff);
>> +	}
>> +
>> +	/* Update Output registers for AXI region 0. */
>> +	addr0 = CDNS_PCIE_AT_OB_REGION_PCI_ADDR0_NBITS(12) |
>> +		CDNS_PCIE_AT_OB_REGION_PCI_ADDR0_DEVFN(devfn) |
>> +		CDNS_PCIE_AT_OB_REGION_PCI_ADDR0_BUS(busn);
>> +	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_PCI_ADDR0(0), addr0);
>> +
>> +	/* Configuration Type 0 or Type 1 access. */
>> +	desc0 = CDNS_PCIE_AT_OB_REGION_DESC0_HARDCODED_RID |
>> +		CDNS_PCIE_AT_OB_REGION_DESC0_DEVFN(0);
>> +	/*
>> +	 * The bus number was already set once for all in desc1 by
>> +	 * cdns_pcie_host_init_address_translation().
>> +	 */
>> +	if (busn == rc->bus_range->start + 1)
>> +		desc0 |= CDNS_PCIE_AT_OB_REGION_DESC0_TYPE_CONF_TYPE0;
>> +	else
>> +		desc0 |= CDNS_PCIE_AT_OB_REGION_DESC0_TYPE_CONF_TYPE1;
>> +	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_DESC0(0), desc0);
>> +
>> +	return rc->cfg_base + (where & 0xfff);
>> +}
>> +
>> +static struct pci_ops cdns_pcie_host_ops = {
>> +	.map_bus	= cdns_pci_map_bus,
>> +	.read		= pci_generic_config_read,
>> +	.write		= pci_generic_config_write,
>> +};
>> +
>> +static const struct of_device_id cdns_pcie_host_of_match[] = {
>> +	{ .compatible = "cdns,cdns-pcie-host" },
>> +
>> +	{ },
>> +};
>> +
>> +static int cdns_pcie_host_init_root_port(struct cdns_pcie_rc *rc)
>> +{
>> +	struct cdns_pcie *pcie = &rc->pcie;
>> +	u32 value, ctrl;
>> +
>> +	/*
>> +	 * Set the root complex BAR configuration register:
>> +	 * - disable both BAR0 and BAR1.
>> +	 * - enable Prefetchable Memory Base and Limit registers in type 1
>> +	 *   config space (64 bits).
>> +	 * - enable IO Base and Limit registers in type 1 config
>> +	 *   space (32 bits).
>> +	 */
>> +	ctrl = CDNS_PCIE_LM_BAR_CFG_CTRL_DISABLED;
>> +	value = CDNS_PCIE_LM_RC_BAR_CFG_BAR0_CTRL(ctrl) |
>> +		CDNS_PCIE_LM_RC_BAR_CFG_BAR1_CTRL(ctrl) |
>> +		CDNS_PCIE_LM_RC_BAR_CFG_PREFETCH_MEM_ENABLE |
>> +		CDNS_PCIE_LM_RC_BAR_CFG_PREFETCH_MEM_64BITS |
>> +		CDNS_PCIE_LM_RC_BAR_CFG_IO_ENABLE |
>> +		CDNS_PCIE_LM_RC_BAR_CFG_IO_32BITS;
>> +	cdns_pcie_writel(pcie, CDNS_PCIE_LM_RC_BAR_CFG, value);
>> +
>> +	/* Set root port configuration space */
>> +	if (rc->vendor_id != 0xffff)
>> +		cdns_pcie_rp_writew(pcie, PCI_VENDOR_ID, rc->vendor_id);
>> +	if (rc->device_id != 0xffff)
>> +		cdns_pcie_rp_writew(pcie, PCI_DEVICE_ID, rc->device_id);
>> +
>> +	cdns_pcie_rp_writeb(pcie, PCI_CLASS_REVISION, 0);
>> +	cdns_pcie_rp_writeb(pcie, PCI_CLASS_PROG, 0);
>> +	cdns_pcie_rp_writew(pcie, PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_PCI);
>> +
>> +	return 0;
>> +}
>> +
>> +static int cdns_pcie_host_init_address_translation(struct cdns_pcie_rc *rc)
>> +{
>> +	struct cdns_pcie *pcie = &rc->pcie;
>> +	struct resource *cfg_res = rc->cfg_res;
>> +	struct resource *mem_res = pcie->mem_res;
>> +	struct resource *bus_range = rc->bus_range;
>> +	struct device *dev = rc->dev;
>> +	struct device_node *np = dev->of_node;
>> +	struct of_pci_range_parser parser;
>> +	struct of_pci_range range;
>> +	u32 addr0, addr1, desc1;
>> +	u64 cpu_addr;
>> +	int r, err;
>> +
>> +	/*
>> +	 * Reserve region 0 for PCI configure space accesses:
>> +	 * OB_REGION_PCI_ADDR0 and OB_REGION_DESC0 are updated dynamically by
>> +	 * cdns_pci_map_bus(), other region registers are set here once for all.
>> +	 */
>> +	addr1 = 0; /* Should be programmed to zero. */
>> +	desc1 = CDNS_PCIE_AT_OB_REGION_DESC1_BUS(bus_range->start);
>> +	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_PCI_ADDR1(0), addr1);
>> +	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_DESC1(0), desc1);
>> +
>> +	cpu_addr = cfg_res->start - mem_res->start;
>> +	addr0 = CDNS_PCIE_AT_OB_REGION_CPU_ADDR0_NBITS(12) |
>> +		(lower_32_bits(cpu_addr) & GENMASK(31, 8));
>> +	addr1 = upper_32_bits(cpu_addr);
>> +	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_CPU_ADDR0(0), addr0);
>> +	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_CPU_ADDR1(0), addr1);
>> +
>> +	err = of_pci_range_parser_init(&parser, np);
>> +	if (err)
>> +		return err;
>> +
>> +	r = 1;
>> +	for_each_of_pci_range(&parser, &range) {
>> +		bool is_io;
>> +
>> +		if (r >= rc->max_regions)
>> +			break;
>> +
>> +		if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_MEM)
>> +			is_io = false;
>> +		else if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO)
>> +			is_io = true;
>> +		else
>> +			continue;
>> +
>> +		cdns_pcie_set_outbound_region(pcie, r, is_io,
>> +					      range.cpu_addr,
>> +					      range.pci_addr,
>> +					      range.size);
>> +		r++;
>> +	}
>> +
>> +	/*
>> +	 * Set Root Port no BAR match Inbound Translation registers:
>> +	 * needed for MSI and DMA.
>> +	 * Root Port BAR0 and BAR1 are disabled, hence no need to set their
>> +	 * inbound translation registers.
>> +	 */
>> +	addr0 = CDNS_PCIE_AT_IB_RP_BAR_ADDR0_NBITS(rc->no_bar_nbits);
>> +	addr1 = 0;
>> +	cdns_pcie_writel(pcie, CDNS_PCIE_AT_IB_RP_BAR_ADDR0(RP_NO_BAR), addr0);
>> +	cdns_pcie_writel(pcie, CDNS_PCIE_AT_IB_RP_BAR_ADDR1(RP_NO_BAR), addr1);
>> +
>> +	return 0;
>> +}
>> +
>> +static int cdns_pcie_host_init(struct device *dev,
>> +			       struct list_head *resources,
>> +			       struct cdns_pcie_rc *rc)
>> +{
>> +	struct resource *bus_range = NULL;
>> +	int err;
>> +
>> +	/* Parse our PCI ranges and request their resources */
>> +	err = pci_parse_request_of_pci_ranges(dev, resources, &bus_range);
>> +	if (err)
>> +		return err;
>> +
>> +	rc->bus_range = bus_range;
>> +	rc->pcie.bus = bus_range->start;
>> +
>> +	err = cdns_pcie_host_init_root_port(rc);
>> +	if (err)
>> +		goto err_out;
>> +
>> +	err = cdns_pcie_host_init_address_translation(rc);
>> +	if (err)
>> +		goto err_out;
>> +
>> +	return 0;
>> +
>> + err_out:
>> +	pci_free_resource_list(resources);
>> +	return err;
>> +}
>> +
>> +static int cdns_pcie_host_probe(struct platform_device *pdev)
>> +{
>> +	const char *type;
>> +	struct device *dev = &pdev->dev;
>> +	struct device_node *np = dev->of_node;
>> +	struct pci_host_bridge *bridge;
>> +	struct list_head resources;
>> +	struct cdns_pcie_rc *rc;
>> +	struct cdns_pcie *pcie;
>> +	struct resource *res;
>> +	int ret;
>> +
>> +	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*rc));
>> +	if (!bridge)
>> +		return -ENOMEM;
>> +
>> +	rc = pci_host_bridge_priv(bridge);
>> +	rc->dev = dev;
>> +
>> +	pcie = &rc->pcie;
>> +	pcie->is_rc = true;
>> +
>> +	rc->max_regions = 32;
>> +	of_property_read_u32(np, "cdns,max-outbound-regions", &rc->max_regions);
>> +
>> +	rc->no_bar_nbits = 32;
>> +	of_property_read_u32(np, "cdns,no-bar-match-nbits", &rc->no_bar_nbits);
>> +
>> +	rc->vendor_id = 0xffff;
>> +	of_property_read_u16(np, "vendor-id", &rc->vendor_id);
>> +
>> +	rc->device_id = 0xffff;
>> +	of_property_read_u16(np, "device-id", &rc->device_id);
>> +
>> +	type = of_get_property(np, "device_type", NULL);
>> +	if (!type || strcmp(type, "pci")) {
>> +		dev_err(dev, "invalid \"device_type\" %s\n", type);
>> +		return -EINVAL;
>> +	}
>> +
>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "reg");
>> +	pcie->reg_base = devm_ioremap_resource(dev, res);
>> +	if (IS_ERR(pcie->reg_base)) {
>> +		dev_err(dev, "missing \"reg\"\n");
>> +		return PTR_ERR(pcie->reg_base);
>> +	}
>> +
>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
>> +	rc->cfg_base = devm_pci_remap_cfg_resource(dev, res);
>> +	if (IS_ERR(rc->cfg_base)) {
>> +		dev_err(dev, "missing \"cfg\"\n");
>> +		return PTR_ERR(rc->cfg_base);
>> +	}
>> +	rc->cfg_res = res;
>> +
>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
>> +	if (!res) {
>> +		dev_err(dev, "missing \"mem\"\n");
>> +		return -EINVAL;
>> +	}
>> +	pcie->mem_res = res;
>> +
>> +	pm_runtime_enable(dev);
>> +	ret = pm_runtime_get_sync(dev);
>> +	if (ret < 0) {
>> +		dev_err(dev, "pm_runtime_get_sync() failed\n");
>> +		goto err_get_sync;
>> +	}
>> +
>> +	ret = cdns_pcie_host_init(dev, &resources, rc);
>> +	if (ret)
>> +		goto err_init;
>> +
>> +	list_splice_init(&resources, &bridge->windows);
>> +	bridge->dev.parent = dev;
>> +	bridge->busnr = pcie->bus;
>> +	bridge->ops = &cdns_pcie_host_ops;
>> +	bridge->map_irq = of_irq_parse_and_map_pci;
>> +	bridge->swizzle_irq = pci_common_swizzle;
>> +
>> +	ret = pci_host_probe(bridge);
>> +	if (ret < 0)
>> +		goto err_host_probe;
>> +
>> +	return 0;
>> +
>> + err_host_probe:
>> +	pci_free_resource_list(&resources);
>> +
>> + err_init:
>> +	pm_runtime_put_sync(dev);
>> +
>> + err_get_sync:
>> +	pm_runtime_disable(dev);
>> +
>> +	return ret;
>> +}
>> +
>> +static struct platform_driver cdns_pcie_host_driver = {
>> +	.driver = {
>> +		.name = "cdns-pcie-host",
>> +		.of_match_table = cdns_pcie_host_of_match,
>> +	},
>> +	.probe = cdns_pcie_host_probe,
>> +};
> 
> In the case of DWC, designware core is modeled as a library which has API's to
> be invoked by various platform specific glue drivers.
> 
> But with the cadence approach we'll have two separate drivers: the cadence core
> driver and the platform specific glue drivers. Is this approach chosen for a
> specific reason?

I don't know yet how many chips will integrate the Cadence PCIe controller
or what customizations would be required. I thought we may have a chance to
handle all the variants with different 'compatible' DT values and their
associated .data in the 'struct of_device_id', or maybe with some
additional DT properties but still the single pcie-cadence-host.c file to
drive all host flavors.

Also I was thinking about regrouping all endpoint flavors in
pcie-cadence-enpoint.c.

I can't figure out yet whether it would be enough.

Best regards,

Cyrille

> 
> Thanks
> Kishon
> 


-- 
Cyrille Pitchen, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux