Hi Shunqian, On Thu, Jan 11, 2018 at 02:44:33PM +0800, Shunqian Zheng wrote: > Hi Jacopo, > > > On 2018年01月10日 17:20, jacopo mondi wrote: > > Hi Shunqian, > > > > On Wed, Jan 10, 2018 at 10:06:04AM +0800, Shunqian Zheng wrote: > > > Add device tree binding documentation for the OV5695 sensor. > > > > > > Signed-off-by: Shunqian Zheng <zhengsq@xxxxxxxxxxxxxx> > > > --- > > > .../devicetree/bindings/media/i2c/ov5695.txt | 41 ++++++++++++++++++++++ > > > 1 file changed, 41 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5695.txt > > > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov5695.txt b/Documentation/devicetree/bindings/media/i2c/ov5695.txt > > > new file mode 100644 > > > index 0000000..2f2f698 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/media/i2c/ov5695.txt > > > @@ -0,0 +1,41 @@ > > > +* Omnivision OV5695 MIPI CSI-2 sensor > > > + > > > +Required Properties: > > > +- compatible: shall be "ovti,ov5695" > > > +- clocks: reference to the xvclk input clock > > > +- clock-names: shall be "xvclk" > > > +- avdd-supply: Analog voltage supply, 2.8 volts > > > +- dovdd-supply: Digital I/O voltage supply, 1.8 volts > > > +- dvdd-supply: Digital core voltage supply, 1.2 volts > > > +- reset-gpios: Low active reset gpio > > > + > > > +The device node shall contain one 'port' child node with an > > > +'endpoint' subnode for its digital output video port, > > > +in accordance with the video interface bindings defined in > > > +Documentation/devicetree/bindings/media/video-interfaces.txt. > > > +The endpoint optional property 'data-lanes' shall be "<1 2>". > > What happens if the property is not present? What's the default? > I think it depends on how the video receiver deal with, 'data-lanes' is > optional as described in video-interfaces.txt, > but if somehow it used in DT, the value "<1 2>" is the right one. They're described as optional there as they may not be mandated for all devices --- they're only relevant for some. The data-lanes property also specifies the number of lanes. I guess you could say two is default. The device can likely be configured to just use one, even if the driver doesn't support it. -- Sakari Ailus e-mail: sakari.ailus@xxxxxx -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
