Hi Rob,
On 11 January 2018 at 20:38, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Sat, Jan 6, 2018 at 6:43 AM, PrasannaKumar Muralidharan
> <prasannatsmkumar@xxxxxxxxx> wrote:
>> Hi Rob,
>>
>> On 4 January 2018 at 01:32, Rob Herring <robh@xxxxxxxxxx> wrote:
>>> On Thu, Dec 28, 2017 at 10:29:52PM +0100, Mathieu Malaterre wrote:
>>>> From: PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx>
>>>>
>>>> This patch brings support for the JZ4780 efuse. Currently it only expose
>>>> a read only access to the entire 8K bits efuse memory.
>>>>
>>>> Tested-by: Mathieu Malaterre <malat@xxxxxxxxxx>
>>>> Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx>
>>>> Signed-off-by: Mathieu Malaterre <malat@xxxxxxxxxx>
>>>> ---
>>>> .../ABI/testing/sysfs-driver-jz4780-efuse | 16 ++
>>>> .../bindings/nvmem/ingenic,jz4780-efuse.txt | 17 ++
>>>
>>> Please split bindings to separate patch.
>>>
>>>> MAINTAINERS | 5 +
>>>> arch/mips/boot/dts/ingenic/jz4780.dtsi | 40 ++-
>>>
>>> dts files should also be separate.
>>>
>>>> drivers/nvmem/Kconfig | 10 +
>>>> drivers/nvmem/Makefile | 2 +
>>>> drivers/nvmem/jz4780-efuse.c | 305 +++++++++++++++++++++
>>>> 7 files changed, 383 insertions(+), 12 deletions(-)
>>>> create mode 100644 Documentation/ABI/testing/sysfs-driver-jz4780-efuse
>>>> create mode 100644 Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.txt
>>>> create mode 100644 drivers/nvmem/jz4780-efuse.c
>>>>
>>>> diff --git a/Documentation/ABI/testing/sysfs-driver-jz4780-efuse b/Documentation/ABI/testing/sysfs-driver-jz4780-efuse
>>>> new file mode 100644
>>>> index 000000000000..bb6f5d6ceea0
>>>> --- /dev/null
>>>> +++ b/Documentation/ABI/testing/sysfs-driver-jz4780-efuse
>>>> @@ -0,0 +1,16 @@
>>>> +What: /sys/devices/*/<our-device>/nvmem
>>>> +Date: December 2017
>>>> +Contact: PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx>
>>>> +Description: read-only access to the efuse on the Ingenic JZ4780 SoC
>>>> + The SoC has a one time programmable 8K efuse that is
>>>> + split into segments. The driver supports read only.
>>>> + The segments are
>>>> + 0x000 64 bit Random Number
>>>> + 0x008 128 bit Ingenic Chip ID
>>>> + 0x018 128 bit Customer ID
>>>> + 0x028 3520 bit Reserved
>>>> + 0x1E0 8 bit Protect Segment
>>>> + 0x1E1 2296 bit HDMI Key
>>>> + 0x300 2048 bit Security boot key
>>>
>>> Why do these need to be exposed to userspace?
>>>
>>> sysfs is 1 value per file and this is lots of different things.
>>>
>>> We already have ways to feed random data (entropy) to the system. And we
>>> have a way to expose SoC ID info to userspace (socdev).
>>
>> Currently ingenic chip id is not used anywhere. The vendor BSP exposed
>> only chip id and customer id. Should we do the same? Please provide
>> your suggestion.
>
> No. Don't create an ABI if you don't really need it.
>
>>
>>>> +Users: any user space application which wants to read the Chip
>>>> + and Customer ID
>>>> diff --git a/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.txt b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.txt
>>>> new file mode 100644
>>>> index 000000000000..cd6d67ec22fc
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.txt
>>>> @@ -0,0 +1,17 @@
>>>> +Ingenic JZ EFUSE driver bindings
>>>> +
>>>> +Required properties:
>>>> +- "compatible" Must be set to "ingenic,jz4780-efuse"
>>>> +- "reg" Register location and length
>>>> +- "clocks" Handle for the ahb clock for the efuse.
>>>> +- "clock-names" Must be "bus_clk"
>>>> +
>>>> +Example:
>>>> +
>>>> +efuse: efuse@134100d0 {
>>>> + compatible = "ingenic,jz4780-efuse";
>>>> + reg = <0x134100D0 0xFF>;
>>>> +
>>>> + clocks = <&cgu JZ4780_CLK_AHB2>;
>>>> + clock-names = "bus_clk";
>>>> +};
>>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>>> index a6e86e20761e..7a050c20c533 100644
>>>> --- a/MAINTAINERS
>>>> +++ b/MAINTAINERS
>>>> @@ -6902,6 +6902,11 @@ M: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@xxxxxxxxxx>
>>>> S: Maintained
>>>> F: drivers/dma/dma-jz4780.c
>>>>
>>>> +INGENIC JZ4780 EFUSE Driver
>>>> +M: PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx>
>>>> +S: Maintained
>>>> +F: drivers/nvmem/jz4780-efuse.c
>>>
>>> Binding file?
>>
>> Sorry, missed it. Will add it.
>>
>>>> +
>>>> INGENIC JZ4780 NAND DRIVER
>>>> M: Harvey Hunt <harveyhuntnexus@xxxxxxxxx>
>>>> L: linux-mtd@xxxxxxxxxxxxxxxxxxx
>>>> diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
>>>> index 9b5794667aee..3fb9d916a2ea 100644
>>>> --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
>>>> +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
>>>> @@ -224,21 +224,37 @@
>>>> reg = <0x10002000 0x100>;
>>>> };
>>>>
>>>> - nemc: nemc@13410000 {
>>>> - compatible = "ingenic,jz4780-nemc";
>>>> - reg = <0x13410000 0x10000>;
>>>> - #address-cells = <2>;
>>>> +
>>>> + ahb2: ahb2 {
>>>> + compatible = "simple-bus";
>>>
>>> This is an unrelated change and should be its own patch.
>>
>> The efuse register address range is a subset of address range of nemc.
>> So decided to make nemc and efuse as nodes with parent node ahb2. This
>> is required for efuse driver to work. I am not able to understand what
>> you mean by unrelated change. Can you please explain it?
>>
>>>> + #address-cells = <1>;
>>>> #size-cells = <1>;
>>>> - ranges = <1 0 0x1b000000 0x1000000
>>>> - 2 0 0x1a000000 0x1000000
>>>> - 3 0 0x19000000 0x1000000
>>>> - 4 0 0x18000000 0x1000000
>>>> - 5 0 0x17000000 0x1000000
>>>> - 6 0 0x16000000 0x1000000>;
>>>> + ranges = <>;
>>>> +
>>>> + nemc: nemc@13410000 {
>>>> + compatible = "ingenic,jz4780-nemc";
>>>> + reg = <0x13410000 0x10000>;
>>>> + #address-cells = <2>;
>>>> + #size-cells = <1>;
>>>> + ranges = <1 0 0x1b000000 0x1000000
>>>> + 2 0 0x1a000000 0x1000000
>>>> + 3 0 0x19000000 0x1000000
>>>> + 4 0 0x18000000 0x1000000
>>>> + 5 0 0x17000000 0x1000000
>>>> + 6 0 0x16000000 0x1000000>;
>>>> +
>>>> + clocks = <&cgu JZ4780_CLK_NEMC>;
>>>> +
>>>> + status = "disabled";
>>>> + };
>>>>
>>>> - clocks = <&cgu JZ4780_CLK_NEMC>;
>>>> + efuse: efuse@134100d0 {
>>>> + compatible = "ingenic,jz4780-efuse";
>>>> + reg = <0x134100d0 0xff>;
>>>
>>> You are creating an overlapping region here with nemc above. Don't do
>>> that.
>>
>> Should "reg = <0x13410000 0x10000>;" be used instead?
>
> No, that still overlaps with nemc. What's in registers 0x00-0xcf and
> 0x1d0-0xffff? Either get rid of this node altogether and make the
> driver for nemc also instantiate the efuse driver (DT is not the only
> way to instantiate drivers), or create sub-nodes under nemc for each
> distinct h/w block in the 13410000-13420000 address space.
My idea was not to change nemc driver.
By "create sub-nodes under nemc" do you mean something like below?
nemc: nemc@13410000 {
compatible = "ingenic,jz4780-nemc";
reg = <0x13410000 0x10000>;
<...>
status = "disabled";
efuse: efuse@134101d0 {
compatible = "ingenic,jz4780-efuse";
reg = <0x134100d0 0xff>;
}
}
Will this instantiate efuse driver? I do not know how to do that with
sub-node. I will explore more on this.
> Or a third option is make nemc reg:
>
> reg = <0x13410000 0xd0>, <0x134101d0 0xfe30>;
>
> But I suspect that is wrong and you probably have some other function in there.
>
> Rob
If the efuse block were to use a different base register address (that
does not overlap with nemc register range) in future SoC how the node
should be? Using nemc to instantiate efuse won't be the best choice if
that happens.
Thanks,
PrasannaKumar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
