The nattis currently relies on the cmdline to correctly configure the
MTD partition table, and the one given in the device tree is simply
ignored. Which is fortunate, since the device tree partition table is
bonkers and does not match reality.
So, in order to avoid confusion, fix the device tree partition table
to match what is expected (i.e. what is normally provided on the cmdline).
In particular, the rootfs partition should be mtd6.
Fixes: 0e4323899973 ("ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power")
Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
---
arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 25 +++++++++++++++----------
1 file changed, 15 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index 3ea1d26e1c68..4882bd6d38c1 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -216,24 +216,29 @@
reg = <0x0 0x40000>;
};
- bootloader@40000 {
- label = "bootloader";
- reg = <0x40000 0x80000>;
+ barebox@40000 {
+ label = "barebox";
+ reg = <0x40000 0x60000>;
};
- bootloaderenv@c0000 {
- label = "bootloader env";
- reg = <0xc0000 0xc0000>;
+ bareboxenv@c0000 {
+ label = "bareboxenv";
+ reg = <0xc0000 0x40000>;
};
- dtb@180000 {
- label = "device tree";
- reg = <0x180000 0x80000>;
+ bareboxenv2@100000 {
+ label = "bareboxenv2";
+ reg = <0x100000 0x40000>;
+ };
+
+ oftree@180000 {
+ label = "oftree";
+ reg = <0x180000 0x20000>;
};
kernel@200000 {
label = "kernel";
- reg = <0x200000 0x600000>;
+ reg = <0x200000 0x500000>;
};
rootfs@800000 {
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
