On 01/12/2018 03:04 PM, Jacopo Mondi wrote:
> Remove soc_camera framework dependencies from ov772x sensor driver.
> - Handle clock and gpios
> - Register async subdevice
> - Remove soc_camera specific g/s_mbus_config operations
> - Change image format colorspace from JPEG to SRGB as the two use the
> same colorspace information but JPEG makes assumptions on color
> components quantization that do not apply to the sensor
> - Remove sizes crop from get_selection as driver can't scale
> - Add kernel doc to driver interface header file
> - Adjust build system
>
> This commit does not remove the original soc_camera based driver as long
> as other platforms depends on soc_camera-based CEU driver.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/Kconfig | 11 +++
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/ov772x.c | 177 ++++++++++++++++++++++++++++++---------------
> include/media/i2c/ov772x.h | 6 +-
> 4 files changed, 133 insertions(+), 62 deletions(-)
>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index cb5d7ff..a61d7f4 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -645,6 +645,17 @@ config VIDEO_OV5670
> To compile this driver as a module, choose M here: the
> module will be called ov5670.
>
> +config VIDEO_OV772X
> + tristate "OmniVision OV772x sensor support"
> + depends on I2C && VIDEO_V4L2
> + depends on MEDIA_CAMERA_SUPPORT
> + ---help---
> + This is a Video4Linux2 sensor-level driver for the OmniVision
> + OV772x camera.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called ov772x.
> +
> config VIDEO_OV7640
> tristate "OmniVision OV7640 sensor support"
> depends on I2C && VIDEO_V4L2
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index 548a9ef..fb99293 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -66,6 +66,7 @@ obj-$(CONFIG_VIDEO_OV5645) += ov5645.o
> obj-$(CONFIG_VIDEO_OV5647) += ov5647.o
> obj-$(CONFIG_VIDEO_OV5670) += ov5670.o
> obj-$(CONFIG_VIDEO_OV6650) += ov6650.o
> +obj-$(CONFIG_VIDEO_OV772X) += ov772x.o
> obj-$(CONFIG_VIDEO_OV7640) += ov7640.o
> obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
> obj-$(CONFIG_VIDEO_OV9650) += ov9650.o
> diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
> index 8063835..df2516c 100644
> --- a/drivers/media/i2c/ov772x.c
> +++ b/drivers/media/i2c/ov772x.c
> @@ -1,6 +1,9 @@
> +// SPDX-License-Identifier: GPL-2.0
> /*
> * ov772x Camera Driver
> *
> + * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> + *
> * Copyright (C) 2008 Renesas Solutions Corp.
> * Kuninori Morimoto <morimoto.kuninori@xxxxxxxxxxx>
> *
> @@ -9,27 +12,25 @@
> * Copyright 2006-7 Jonathan Corbet <corbet@xxxxxxx>
> * Copyright (C) 2008 Magnus Damm
> * Copyright (C) 2008, Guennadi Liakhovetski <kernel@xxxxxxxxxxxxxx>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> */
>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> #include <linux/init.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> -#include <linux/i2c.h>
> #include <linux/slab.h>
> -#include <linux/delay.h>
> #include <linux/v4l2-mediabus.h>
> #include <linux/videodev2.h>
>
> #include <media/i2c/ov772x.h>
> -#include <media/soc_camera.h>
> -#include <media/v4l2-clk.h>
> +
> #include <media/v4l2-ctrls.h>
> -#include <media/v4l2-subdev.h>
> +#include <media/v4l2-device.h>
> #include <media/v4l2-image-sizes.h>
> +#include <media/v4l2-subdev.h>
>
> /*
> * register offset
> @@ -393,8 +394,10 @@ struct ov772x_win_size {
> struct ov772x_priv {
> struct v4l2_subdev subdev;
> struct v4l2_ctrl_handler hdl;
> - struct v4l2_clk *clk;
> + struct clk *clk;
> struct ov772x_camera_info *info;
> + struct gpio_desc *pwdn_gpio;
> + struct gpio_desc *rstb_gpio;
> const struct ov772x_color_format *cfmt;
> const struct ov772x_win_size *win;
> unsigned short flag_vflip:1;
> @@ -409,7 +412,7 @@ struct ov772x_priv {
> static const struct ov772x_color_format ov772x_cfmts[] = {
> {
> .code = MEDIA_BUS_FMT_YUYV8_2X8,
> - .colorspace = V4L2_COLORSPACE_JPEG,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> .dsp3 = 0x0,
> .dsp4 = DSP_OFMT_YUV,
> .com3 = SWAP_YUV,
> @@ -417,7 +420,7 @@ static const struct ov772x_color_format ov772x_cfmts[] = {
> },
> {
> .code = MEDIA_BUS_FMT_YVYU8_2X8,
> - .colorspace = V4L2_COLORSPACE_JPEG,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> .dsp3 = UV_ON,
> .dsp4 = DSP_OFMT_YUV,
> .com3 = SWAP_YUV,
> @@ -425,7 +428,7 @@ static const struct ov772x_color_format ov772x_cfmts[] = {
> },
> {
> .code = MEDIA_BUS_FMT_UYVY8_2X8,
> - .colorspace = V4L2_COLORSPACE_JPEG,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> .dsp3 = 0x0,
> .dsp4 = DSP_OFMT_YUV,
> .com3 = 0x0,
> @@ -550,7 +553,7 @@ static int ov772x_reset(struct i2c_client *client)
> }
>
> /*
> - * soc_camera_ops function
> + * subdev ops
> */
>
> static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
> @@ -650,13 +653,65 @@ static int ov772x_s_register(struct v4l2_subdev *sd,
> }
> #endif
>
> +static int ov772x_power_on(struct ov772x_priv *priv)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
> + int ret;
> +
> + if (priv->clk) {
> + ret = clk_prepare_enable(priv->clk);
> + if (ret)
> + return ret;
> + }
> +
> + if (priv->pwdn_gpio) {
> + gpiod_set_value(priv->pwdn_gpio, 1);
> + usleep_range(500, 1000);
> + }
> +
> + /*
> + * FIXME: The reset signal is connected to a shared GPIO on some
> + * platforms (namely the SuperH Migo-R). Until a framework becomes
> + * available to handle this cleanly, request the GPIO temporarily
> + * to avoid conflicts.
> + */
> + priv->rstb_gpio = gpiod_get_optional(&client->dev, "rstb",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(priv->rstb_gpio)) {
> + dev_info(&client->dev, "Unable to get GPIO \"rstb\"");
> + return PTR_ERR(priv->rstb_gpio);
> + }
> +
> + if (priv->rstb_gpio) {
> + gpiod_set_value(priv->rstb_gpio, 1);
> + usleep_range(500, 1000);
> + gpiod_set_value(priv->rstb_gpio, 0);
> + usleep_range(500, 1000);
> +
> + gpiod_put(priv->rstb_gpio);
> + }
> +
> + return 0;
> +}
> +
> +static int ov772x_power_off(struct ov772x_priv *priv)
> +{
> + clk_disable_unprepare(priv->clk);
> +
> + if (priv->pwdn_gpio) {
> + gpiod_set_value(priv->pwdn_gpio, 0);
> + usleep_range(500, 1000);
> + }
> +
> + return 0;
> +}
> +
> static int ov772x_s_power(struct v4l2_subdev *sd, int on)
> {
> - struct i2c_client *client = v4l2_get_subdevdata(sd);
> - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
> struct ov772x_priv *priv = to_ov772x(sd);
>
> - return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);
> + return on ? ov772x_power_on(priv) :
> + ov772x_power_off(priv);
> }
>
> static const struct ov772x_win_size *ov772x_select_win(u32 width, u32 height)
> @@ -855,24 +910,21 @@ static int ov772x_get_selection(struct v4l2_subdev *sd,
> struct v4l2_subdev_pad_config *cfg,
> struct v4l2_subdev_selection *sel)
> {
> + struct ov772x_priv *priv = to_ov772x(sd);
> +
> if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
> return -EINVAL;
>
> - sel->r.left = 0;
> - sel->r.top = 0;
Why are these two lines removed?
> switch (sel->target) {
> case V4L2_SEL_TGT_CROP_BOUNDS:
> case V4L2_SEL_TGT_CROP_DEFAULT:
> - sel->r.width = OV772X_MAX_WIDTH;
> - sel->r.height = OV772X_MAX_HEIGHT;
> - return 0;
> case V4L2_SEL_TGT_CROP:
> - sel->r.width = VGA_WIDTH;
> - sel->r.height = VGA_HEIGHT;
> - return 0;
> - default:
> - return -EINVAL;
Why is this default case removed?
> + sel->r.width = priv->win->rect.width;
> + sel->r.height = priv->win->rect.height;
> + break;
> }
> +
> + return 0;
> }
>
> static int ov772x_get_fmt(struct v4l2_subdev *sd,
> @@ -997,24 +1049,8 @@ static int ov772x_enum_mbus_code(struct v4l2_subdev *sd,
> return 0;
> }
>
> -static int ov772x_g_mbus_config(struct v4l2_subdev *sd,
> - struct v4l2_mbus_config *cfg)
> -{
> - struct i2c_client *client = v4l2_get_subdevdata(sd);
> - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
> -
> - cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
> - V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
> - V4L2_MBUS_DATA_ACTIVE_HIGH;
> - cfg->type = V4L2_MBUS_PARALLEL;
> - cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
> -
> - return 0;
> -}
> -
> static const struct v4l2_subdev_video_ops ov772x_subdev_video_ops = {
> .s_stream = ov772x_s_stream,
> - .g_mbus_config = ov772x_g_mbus_config,
> };
>
> static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = {
> @@ -1038,12 +1074,11 @@ static int ov772x_probe(struct i2c_client *client,
> const struct i2c_device_id *did)
> {
> struct ov772x_priv *priv;
> - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
> - struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
> + struct i2c_adapter *adapter = client->adapter;
> int ret;
>
> - if (!ssdd || !ssdd->drv_priv) {
> - dev_err(&client->dev, "OV772X: missing platform data!\n");
> + if (!client->dev.platform_data) {
> + dev_err(&client->dev, "Missing OV7725 platform data\n");
Nitpick: I'd prefer lowercase in this string: ov7725. It also should be
ov772x.
> return -EINVAL;
> }
>
> @@ -1059,7 +1094,7 @@ static int ov772x_probe(struct i2c_client *client,
> if (!priv)
> return -ENOMEM;
>
> - priv->info = ssdd->drv_priv;
> + priv->info = client->dev.platform_data;
>
> v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
> v4l2_ctrl_handler_init(&priv->hdl, 3);
> @@ -1073,22 +1108,42 @@ static int ov772x_probe(struct i2c_client *client,
> if (priv->hdl.error)
> return priv->hdl.error;
>
> - priv->clk = v4l2_clk_get(&client->dev, "mclk");
> + priv->clk = clk_get(&client->dev, "xclk");
> if (IS_ERR(priv->clk)) {
> + dev_err(&client->dev, "Unable to get xclk clock\n");
> ret = PTR_ERR(priv->clk);
> - goto eclkget;
> + goto error_ctrl_free;
> }
>
> - ret = ov772x_video_probe(priv);
> - if (ret < 0) {
> - v4l2_clk_put(priv->clk);
> -eclkget:
> - v4l2_ctrl_handler_free(&priv->hdl);
> - } else {
> - priv->cfmt = &ov772x_cfmts[0];
> - priv->win = &ov772x_win_sizes[0];
> + priv->pwdn_gpio = gpiod_get_optional(&client->dev, "pwdn",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(priv->pwdn_gpio)) {
> + dev_info(&client->dev, "Unable to get GPIO \"pwdn\"");
> + ret = PTR_ERR(priv->pwdn_gpio);
> + goto error_clk_put;
> }
>
> + ret = ov772x_video_probe(priv);
> + if (ret < 0)
> + goto error_gpio_put;
> +
> + priv->cfmt = &ov772x_cfmts[0];
> + priv->win = &ov772x_win_sizes[0];
> +
> + ret = v4l2_async_register_subdev(&priv->subdev);
> + if (ret)
> + goto error_gpio_put;
> +
> + return 0;
> +
> +error_gpio_put:
> + if (priv->pwdn_gpio)
> + gpiod_put(priv->pwdn_gpio);
> +error_clk_put:
> + clk_put(priv->clk);
> +error_ctrl_free:
> + v4l2_ctrl_handler_free(&priv->hdl);
> +
> return ret;
> }
>
> @@ -1096,7 +1151,9 @@ static int ov772x_remove(struct i2c_client *client)
> {
> struct ov772x_priv *priv = to_ov772x(i2c_get_clientdata(client));
>
> - v4l2_clk_put(priv->clk);
> + clk_put(priv->clk);
> + if (priv->pwdn_gpio)
> + gpiod_put(priv->pwdn_gpio);
> v4l2_device_unregister_subdev(&priv->subdev);
> v4l2_ctrl_handler_free(&priv->hdl);
> return 0;
> @@ -1119,6 +1176,6 @@ static struct i2c_driver ov772x_i2c_driver = {
>
> module_i2c_driver(ov772x_i2c_driver);
>
> -MODULE_DESCRIPTION("SoC Camera driver for ov772x");
> +MODULE_DESCRIPTION("V4L2 driver for OV772x image sensor");
Ditto: lower case ov772x.
> MODULE_AUTHOR("Kuninori Morimoto");
> MODULE_LICENSE("GPL v2");
Hmm, shouldn't there be a struct of_device_id as well? So this can be
used in the device tree?
I see this sensor was only tested with a non-dt platform. Is it possible
to test this sensor with the GR-Peach platform (which I gather uses the
device tree)?
Making this driver DT compliant can be done as a follow-up patch.
> diff --git a/include/media/i2c/ov772x.h b/include/media/i2c/ov772x.h
> index 00dbb7c..27d087b 100644
> --- a/include/media/i2c/ov772x.h
> +++ b/include/media/i2c/ov772x.h
> @@ -48,8 +48,10 @@ struct ov772x_edge_ctrl {
> .threshold = (t & OV772X_EDGE_THRESHOLD_MASK), \
> }
>
> -/*
> - * ov772x camera info
> +/**
> + * ov772x_camera_info - ov772x driver interface structure
> + * @flags: Sensor configuration flags
> + * @edgectrl: Sensor edge control
> */
> struct ov772x_camera_info {
> unsigned long flags;
>
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
