[PATCH v2 2/2] iio: ad5272: Add support for Analog Devices digital potentiometers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Add implementation for Analog Devices AD5272 and AD5274 digital
potentiometer devices.

Signed-off-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
---
 drivers/iio/potentiometer/Kconfig  |  10 ++
 drivers/iio/potentiometer/Makefile |   1 +
 drivers/iio/potentiometer/ad5272.c | 227 +++++++++++++++++++++++++++++++++++++
 3 files changed, 238 insertions(+)
 create mode 100644 drivers/iio/potentiometer/ad5272.c

diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
index 8bf2825..0b04063 100644
--- a/drivers/iio/potentiometer/Kconfig
+++ b/drivers/iio/potentiometer/Kconfig
@@ -5,6 +5,16 @@
 
 menu "Digital potentiometers"
 
+config AD5272
+	tristate "Analog Devices AD5272 Digital Potentiometer driver"
+	depends on I2C
+	help
+	  Say yes here to build support for the Analog Devices AD5272
+	  digital potentiometer chip.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad5272.
+
 config DS1803
 	tristate "Maxim Integrated DS1803 Digital Potentiometer driver"
 	depends on I2C
diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
index 2260d40..498bbb8 100644
--- a/drivers/iio/potentiometer/Makefile
+++ b/drivers/iio/potentiometer/Makefile
@@ -3,6 +3,7 @@
 #
 
 # When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_AD5272) += ad5272.o
 obj-$(CONFIG_DS1803) += ds1803.o
 obj-$(CONFIG_MAX5481) += max5481.o
 obj-$(CONFIG_MAX5487) += max5487.o
diff --git a/drivers/iio/potentiometer/ad5272.c b/drivers/iio/potentiometer/ad5272.c
new file mode 100644
index 0000000..a04b018
--- /dev/null
+++ b/drivers/iio/potentiometer/ad5272.c
@@ -0,0 +1,227 @@
+/*
+ * Analog Devices AD5372 digital potentiometer driver
+ * Copyright (C) 2018 Phil Reid <preid@xxxxxxxxxxxxxxxxx>
+ *
+ * Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5272_5274.pdf
+ *
+ * DEVID	#Wipers	#Positions	Resistor Opts (kOhm)	i2c address
+ * ad5272	1	1024		20, 50, 100		01011xx
+ * ad5274	1	256		20, 100			01011xx
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+
+#define  AD5272_RDAC_WR  1
+#define  AD5272_RDAC_RD  2
+#define  AD5272_RESET    4
+#define  AD5272_CTL      7
+
+#define  AD5272_RDAC_WR_EN  BIT(1)
+
+struct ad5272_cfg {
+	int max_pos;
+	int kohms;
+	int shift;
+};
+
+enum ad5272_type {
+	AD5272_020,
+	AD5272_050,
+	AD5272_100,
+	AD5274_020,
+	AD5274_100,
+};
+
+static const struct ad5272_cfg ad5272_cfg[] = {
+	/* on-semiconductor parts */
+	[AD5272_020] = { .max_pos = 1024, .kohms = 20 },
+	[AD5272_050] = { .max_pos = 1024, .kohms = 50 },
+	[AD5272_100] = { .max_pos = 1024, .kohms = 100 },
+	[AD5274_020] = { .max_pos = 256,  .kohms = 20,  .shift = 2 },
+	[AD5274_100] = { .max_pos = 256,  .kohms = 100, .shift = 2 },
+};
+
+struct ad5272_data {
+	struct i2c_client       *client;
+	struct mutex            lock;
+	const struct ad5272_cfg *cfg;
+};
+
+static const struct iio_chan_spec ad5272_channel = {
+	.type = IIO_RESISTANCE,
+	.output = 1,
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+};
+
+static int ad5272_write(struct ad5272_data *data, int reg, int val)
+{
+	u8 buf[2] = { (reg << 2) | ((val >> 8) & 0x3), (u8)val };
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = i2c_master_send(data->client, buf, sizeof(buf));
+	mutex_unlock(&data->lock);
+	return ret < 0 ? ret : 0;
+}
+
+static int ad5272_read(struct ad5272_data *data, int reg, int *val)
+{
+	u8 buf[2] = {reg << 2, 0};
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = i2c_master_send(data->client, buf, sizeof(buf));
+	if (ret < 0)
+		goto error;
+
+	ret = i2c_master_recv(data->client, buf, sizeof(buf));
+	if (ret < 0)
+		goto error;
+
+	*val = ((buf[0] & 0x3) << 8) | buf[1];
+	ret = 0;
+error:
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static int ad5272_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	struct ad5272_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW: {
+		ret = ad5272_read(data, AD5272_RDAC_RD, val);
+		*val = *val >> data->cfg->shift;
+		return ret ? ret : IIO_VAL_INT;
+	}
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1000 * data->cfg->kohms;
+		*val2 = data->cfg->max_pos;
+		return IIO_VAL_FRACTIONAL;
+	}
+
+	return -EINVAL;
+}
+
+static int ad5272_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	struct ad5272_data *data = iio_priv(indio_dev);
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	if (val >= data->cfg->max_pos || val < 0 || val2)
+		return -EINVAL;
+
+	return ad5272_write(data, AD5272_RDAC_WR, val << data->cfg->shift);
+}
+
+static const struct iio_info ad5272_info = {
+	.read_raw = ad5272_read_raw,
+	.write_raw = ad5272_write_raw,
+};
+
+static int ad5272_reset(struct ad5272_data *data)
+{
+	struct gpio_desc *reset_gpio;
+
+	reset_gpio = devm_gpiod_get_optional(&data->client->dev, "reset",
+		GPIOD_OUT_LOW);
+	if (IS_ERR(reset_gpio))
+		return PTR_ERR(reset_gpio);
+
+	if (reset_gpio) {
+		udelay(1);
+		gpiod_set_value(reset_gpio, 1);
+	} else {
+		ad5272_write(data, AD5272_RESET, 0);
+	}
+	usleep_range(1000, 2000);
+	return 0;
+}
+
+static int ad5272_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct iio_dev *indio_dev;
+	struct ad5272_data *data;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, indio_dev);
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	mutex_init(&data->lock);
+	data->cfg = &ad5272_cfg[id->driver_data];
+
+	ret = ad5272_reset(data);
+	if (ret)
+		return ret;
+
+	ret = ad5272_write(data, AD5272_CTL, AD5272_RDAC_WR_EN);
+	if (ret < 0)
+		return -ENODEV;
+
+	indio_dev->dev.parent = dev;
+	indio_dev->info = &ad5272_info;
+	indio_dev->channels = &ad5272_channel;
+	indio_dev->num_channels = 1;
+	indio_dev->name = client->name;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id ad5272_dt_ids[] = {
+	{ .compatible = "adi,ad5272-020", .data = (void *)AD5272_020 },
+	{ .compatible = "adi,ad5272-050", .data = (void *)AD5272_050 },
+	{ .compatible = "adi,ad5272-100", .data = (void *)AD5272_100 },
+	{ .compatible = "adi,ad5274-020", .data = (void *)AD5274_020 },
+	{ .compatible = "adi,ad5274-100", .data = (void *)AD5274_100 },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ad5272_dt_ids);
+#endif /* CONFIG_OF */
+
+static const struct i2c_device_id ad5272_id[] = {
+	{ "ad5272-020", AD5272_020 },
+	{ "ad5272-050", AD5272_050 },
+	{ "ad5272-100", AD5272_100 },
+	{ "ad5274-020", AD5274_020 },
+	{ "ad5274-100", AD5274_100 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ad5272_id);
+
+static struct i2c_driver ad5272_driver = {
+	.driver = {
+		.name	= "ad5272",
+		.of_match_table = of_match_ptr(ad5272_dt_ids),
+	},
+	.probe		= ad5272_probe,
+	.id_table	= ad5272_id,
+};
+
+module_i2c_driver(ad5272_driver);
+
+MODULE_AUTHOR("Phil Reid <preid@xxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("AD5272 digital potentiometer");
+MODULE_LICENSE("GPL v2");
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux