On Mon, Jan 15, 2018 at 7:05 AM, <jassisinghbrar@xxxxxxxxx> wrote: > From: Jassi Brar <jaswinder.singh@xxxxxxxxxx> > > This patch adds documentation for Device-Tree bindings for the > Socionext Synquacer spi driver. > > Signed-off-by: Jassi Brar <jaswinder.singh@xxxxxxxxxx> > --- > .../devicetree/bindings/spi/spi-synquacer.txt | 24 ++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > create mode 100644 Documentation/devicetree/bindings/spi/spi-synquacer.txt > > diff --git a/Documentation/devicetree/bindings/spi/spi-synquacer.txt b/Documentation/devicetree/bindings/spi/spi-synquacer.txt > new file mode 100644 > index 0000000..d013cfd > --- /dev/null > +++ b/Documentation/devicetree/bindings/spi/spi-synquacer.txt > @@ -0,0 +1,24 @@ > +* Socionext Synquacer HS-SPI bindings > + > +Required Properties: > +- compatible: should be "socionext,synquacer-spi" > +- reg: physical base address of the controller and length of memory mapped > + region. > +- clocks: Must contain an entry for rate source clock(s). > +- clock-names: Shall be "iHCLK" or "iPCLK". iHCLK is preferred over iPCLK Huh? The clock binding should reflect all clocks connected to a block, not a selection of which one you want to use. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
