Hi, This adds support for the internal switch found in GE Healthcare B450v3, B650v3 and B850v3. All devices use a GPIO bitbanged MDIO bus to communicate with the switch and a PCIe based network card for exchanging network data. The cpu network data link requires, that the switch's internal phy interface is enabled, so support for that is added by the first patch in this series. The patch series is based on v4.15-rc8. Changes since PATCHv1: * Use 'marvell,mv88e6085' instead of introducing compatible string for mv88e6240. * Fix indention of DT nodes * Only enable 'cpu' phy, if explicitly set to "internal". -- Sebastian Sebastian Reichel (5): net: dsa: Support internal phy on 'cpu' port ARM: dts: imx6q-bx50v3: Add internal switch ARM: dts: imx6q-b850v3: Add switch port configuration ARM: dts: imx6q-b650v3: Add switch port configuration ARM: dts: imx6q-b450v3: Add switch port configuration arch/arm/boot/dts/imx6q-b450v3.dts | 48 +++++++++++++++++++++++++ arch/arm/boot/dts/imx6q-b650v3.dts | 48 +++++++++++++++++++++++++ arch/arm/boot/dts/imx6q-b850v3.dts | 71 +++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6q-bx50v3.dtsi | 37 +++++++++++++++++++ net/dsa/port.c | 23 +++++++++--- 5 files changed, 223 insertions(+), 4 deletions(-) -- 2.15.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
