Hi Jacopo, On Friday, 12 January 2018 16:04:00 EET Jacopo Mondi wrote: > Hello, > (hopefully) last round for CEU driver. > > Changelog is quite thin, I have updated CEU driver MODULE_LICENSE to match > SPDX identifier, added Rob's and Laurent's Reviewed-by tags to bindings, and > made variables of "struct ceu_data" type static in the driver. > > All of the patches are now Reviewed/Acked. Time to have this series > included? Yes please ! Hans, could you pick this up ? > v4->v5: > - Added Rob's and Laurent's Reviewed-by tag to DT bindings > - Change CEU driver module license to "GPL v2" to match SPDX identifier as > suggested by Philippe Ombredanne > - Make struct ceu_data static as suggested by Laurent and add his > Reviewed-by to CEU driver. > > v3->v4: > - Drop generic fallback compatible string "renesas,ceu" > - Addressed Laurent's comments on [3/9] > - Fix error messages on irq get/request > - Do not leak ceudev if irq_get fails > - Make irq_mask a const field > > v2->v3: > - Improved DT bindings removing standard properties (pinctrl- ones and > remote-endpoint) not specific to this driver and improved description of > compatible strings > - Remove ov772x's xlkc_rate property and set clock rate in Migo-R board file > - Made 'xclk' clock private to ov772x driver in Migo-R board file > - Change 'rstb' GPIO active output level and changed ov772x and tw9910 > drivers accordingly as suggested by Fabio > - Minor changes in CEU driver to address Laurent's comments > - Moved Migo-R setup patch to the end of the series to silence 0-day bot > - Renamed tw9910 clock to 'xti' as per video decoder manual > - Changed all SPDX identifiers to GPL-2.0 from previous GPL-2.0+ > > v1->v2: > - DT > -- Addressed Geert's comments and added clocks for CEU to mstp6 clock > source -- Specified supported generic video iterfaces properties in > dt-bindings and simplified example > > - CEU driver > -- Re-worked interrupt handler, interrupt management, reset(*) and capture > start operation > -- Re-worked querycap/enum_input/enum_frameintervals to fix some > v4l2_compliance failures > -- Removed soc_camera legacy operations g/s_mbus_format > -- Update to new notifier implementation > -- Fixed several comments from Hans, Laurent and Sakari > > - Migo-R > -- Register clocks and gpios for sensor drivers in Migo-R setup > -- Updated sensors (tw9910 and ov772x) drivers headers and drivers to close > remarks from Hans and Laurent: > --- Removed platform callbacks and handle clocks and gpios from sensor > drivers --- Remove g/s_mbus_config operations > > Jacopo Mondi (9): > dt-bindings: media: Add Renesas CEU bindings > include: media: Add Renesas CEU driver interface > v4l: platform: Add Renesas CEU driver > ARM: dts: r7s72100: Add Capture Engine Unit (CEU) > v4l: i2c: Copy ov772x soc_camera sensor driver > media: i2c: ov772x: Remove soc_camera dependencies > v4l: i2c: Copy tw9910 soc_camera sensor driver > media: i2c: tw9910: Remove soc_camera dependencies > arch: sh: migor: Use new renesas-ceu camera driver > > .../devicetree/bindings/media/renesas,ceu.txt | 81 + > arch/arm/boot/dts/r7s72100.dtsi | 15 +- > arch/sh/boards/mach-migor/setup.c | 225 ++- > arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 2 +- > drivers/media/i2c/Kconfig | 20 + > drivers/media/i2c/Makefile | 2 + > drivers/media/i2c/ov772x.c | 1181 ++++++++++++++ > drivers/media/i2c/tw9910.c | 1039 ++++++++++++ > drivers/media/platform/Kconfig | 9 + > drivers/media/platform/Makefile | 1 + > drivers/media/platform/renesas-ceu.c | 1648 +++++++++++++++++ > include/media/drv-intf/renesas-ceu.h | 26 + > include/media/i2c/ov772x.h | 6 +- > include/media/i2c/tw9910.h | 9 + > 14 files changed, 4133 insertions(+), 131 deletions(-) > create mode 100644 Documentation/devicetree/bindings/media/renesas,ceu.txt > create mode 100644 drivers/media/i2c/ov772x.c > create mode 100644 drivers/media/i2c/tw9910.c > create mode 100644 drivers/media/platform/renesas-ceu.c > create mode 100644 include/media/drv-intf/renesas-ceu.h -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
