Re: [PATCH v3 0/7] Marvell NAND controller rework with ->exec_op()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Miquel,

On Tue, Jan 09, 2018 at 11:36:30AM +0100, Miquel Raynal wrote:
> These changes have been tested on:
>    - PXA3xx platform with a CM-X300 board (2kiB page NAND, 1b/512B
>      strength, Hamming ECC engine) [32 bits]
>    - Armada 385 DB AP (4kiB page NAND, 4b/512B, BCH ECC engine) [32 bits]
>    - Armada 398 DB (4kiB page NAND, 8b/512B, BCH ECC engine using a layout
>      with a last chunk different than the others) [32 bits]
>    - Armada 7040 DB and Armada 8040 DB (4kiB page NAND, 4b/512B, BCH ECC
>      engine) [64 bits]
>    - Triax dvb-tc board (2kiB page NAND, 4b/512B, BCH ECC engine) [32 bits]

If you're interested, I have a mirabox with an armada 370 which uses the
same driver. I've not powered it up for a while but if that can be useful
I can try to find some time for this.

Just let me know
Willy
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux