The Raspberry Pi 3 has a GPIO expander that controls, among others, the activity LED, and the camera connector GPIOs. The GPIO expander on an I2C bus that is not directly controlled from the ARM core. The VC4 firmware controls the I2C bus, and allows the ARM core to set/get GPIO settings over its mailbox interface. This series adds support for the RPi3 expander. The driver is ported from the downstream kernel at https://github.com/raspberrypi/linux/, branch rpi-4.9.y. Changes in v2: * Driver renamed to gpio-raspberrypi-exp * Compatible string renamed to "raspberrypi,firmware-gpio" * Firmware error check * Smaller tweaks listed in individual patches Baruch Siach (3): ARM: bcm2835: sync firmware properties with downstream dt-bindings: gpio: add raspberry pi GPIO expander binding ARM: dts: bcm2837-rpi-3-b: add GPIO expander Dave Stevenson (1): gpio: raspberrypi-exp: Driver for RPi3 GPIO expander via mailbox service .../bindings/gpio/raspberrypi,firmware-gpio.txt | 24 ++ arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 10 + drivers/gpio/Kconfig | 9 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-raspberrypi-exp.c | 258 +++++++++++++++++++++ include/soc/bcm2835/raspberrypi-firmware.h | 18 ++ 6 files changed, 320 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt create mode 100644 drivers/gpio/gpio-raspberrypi-exp.c -- 2.15.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
