On Tue, 9 Jan 2018 11:36:30 +0100 Miquel Raynal <miquel.raynal@xxxxxxxxxxxxxxxxxx> wrote: > Hi, > > After the addition of the NAND framework ->exec_op() interface (see [1] > for the series preparing it and [2] for the last version of the > core-side implementation of ->exec_op() itself), this series replaces > the current Marvell NAND controller driver pxa3xx_nand.c with a rework > called marvell_nand.c. > > Aside the fact that it drops the big state machine, improves the overall > speed and implements raw accesses, it is the first driver-side > implementation of the ->exec_op() interface and may be used as reference > for latter reworks of the same type. > > One may find more detail about why a completely new driver is needed in > the commit log of: > > "mtd: nand: add reworked Marvell NAND controller driver" > > Device tree NAND node definition for all platforms referring to the > Marvell driver using the new bindings have already been accepted by the > MVEBU DT maintainers and will be merged after the driver. They are more > hierarchical and fit the real organization of the hardware, by having > NAND partitions that are part of NAND chip nodes, themselves part of the > NAND controller node. > > These changes have been tested on: > - PXA3xx platform with a CM-X300 board (2kiB page NAND, 1b/512B > strength, Hamming ECC engine) [32 bits] > - Armada 385 DB AP (4kiB page NAND, 4b/512B, BCH ECC engine) [32 bits] > - Armada 398 DB (4kiB page NAND, 8b/512B, BCH ECC engine using a layout > with a last chunk different than the others) [32 bits] > - Armada 7040 DB and Armada 8040 DB (4kiB page NAND, 4b/512B, BCH ECC > engine) [64 bits] > - Triax dvb-tc board (2kiB page NAND, 4b/512B, BCH ECC engine) [32 bits] > > This version is known not to be stable yet with a Zylonite based setup but > otherwise looks good for Marvell EBU platforms. So, here is the plan: since the driver has been tested on various mvebu platforms and is known to work fine on these platforms, I'd like to queue the driver and the patch modifying mvebu defconfigs (patches 1 to 4) for 4.16. I'll leave other patches for 4.17, which means I'd like remaining bugs to be fixed during the 4.16 release cycle so that we can eventually get rid of the old driver. That's really important to me that we don't keep both drivers around for too long, because my previous experience showed that, when you have 2 drivers for the same HW, people don't switch to the new one until they're forced to do it. Robert, are you fine with this approach? What about the tests you were doing? Did you make any progress? Did you find other issues? > > For people who would like to test it easily, a branch ready to be tested > is available at [3]. It is based on nand/next and has all the changes > brought by the previously mentionned series as well as this one. > > Thank you, > Miquèl > > > [1] https://www.spinics.net/lists/arm-kernel/msg619633.html > [2] http://lists.infradead.org/pipermail/linux-mtd/2017-December/077965.html > [3] https://github.com/miquelraynal/linux/tree/marvell/nand-next/nfc > > > Changes since v2: > - Added a patch to create the nand-rb property in the Documentation > - Rewording in the Documentation according to Rob's comments > - Moved from marvell,rb to nand-rb property in the code > - Disociated using this driver with Marvell EBU platforms than using > it with PXA ones > - Fixed the handling of 16-bit buses > - Fixed SPDX comment style > - Reorganized registers offsets/bit fields definitions as requested > - Moved to Kernel doc > - Changed the logic in ->select_chip() to use a prepared value of NDCR > only instead of recalculating it > - Fixed the presence of the SPARE_EN bit, reworked a bit the > hmg_do_read/write() helpers > - Fixed the OOB layouts that were unusable (all spare data first, then > all ECC bytes) > - Additional check on mtd->writesize when using NFCv1 (all sizes not > supported) > - Various typos/rewording > > Changes since v1: > - Rewording > - Fixed BCH ->read/write_page() hooks for 2kiB pages NAND chips > - Removed license text, used SPDX tag instead > - Removed read_page_data() > - Enhanced the DT bindings document with the label property and the > deprecated bindings. > - Simplified the read_chunk() helper (OOB always read). > - Simplified the ->bch_read_page() hook by removing the addition raw > read to get ECC bytes. > - Fixed the ->correct() function that did not check for bitflips in > ECC bytes in erased pages. > > > Miquel Raynal (7): > dt-bindings: mtd: document new nand-rb property > dt-bindings: mtd: add Marvell NAND controller documentation > mtd: nand: add reworked Marvell NAND controller driver > mtd: nand: use reworked NAND controller driver with Marvell EBU SoCs > mtd: nand: use Marvell reworked NAND controller driver with all > platforms > dt-bindings: mtd: remove pxa3xx NAND controller documentation > mtd: nand: remove useless fields from pxa3xx NAND platform data > > .../devicetree/bindings/mtd/marvell-nand.txt | 123 + > Documentation/devicetree/bindings/mtd/nand.txt | 1 + > .../devicetree/bindings/mtd/pxa3xx-nand.txt | 50 - > arch/arm/configs/cm_x300_defconfig | 2 +- > arch/arm/configs/mvebu_v7_defconfig | 2 +- > arch/arm/configs/pxa3xx_defconfig | 3 +- > arch/arm/configs/pxa_defconfig | 2 +- > arch/arm/configs/raumfeld_defconfig | 2 +- > arch/arm/mach-mmp/ttc_dkb.c | 4 +- > arch/arm/mach-pxa/cm-x300.c | 8 +- > arch/arm/mach-pxa/colibri-pxa3xx.c | 8 +- > arch/arm/mach-pxa/colibri.h | 2 +- > arch/arm/mach-pxa/littleton.c | 10 +- > arch/arm/mach-pxa/mxm8x10.c | 10 +- > arch/arm/mach-pxa/raumfeld.c | 6 +- > arch/arm/mach-pxa/zylonite.c | 10 +- > arch/arm64/configs/defconfig | 2 +- > drivers/mtd/nand/Kconfig | 18 +- > drivers/mtd/nand/Makefile | 2 +- > drivers/mtd/nand/marvell_nand.c | 2896 ++++++++++++++++++++ > drivers/mtd/nand/pxa3xx_nand.c | 2104 -------------- > include/linux/platform_data/mtd-nand-pxa3xx.h | 43 +- > 22 files changed, 3072 insertions(+), 2236 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mtd/marvell-nand.txt > delete mode 100644 Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt > create mode 100644 drivers/mtd/nand/marvell_nand.c > delete mode 100644 drivers/mtd/nand/pxa3xx_nand.c > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
