The D25 LED controlled by gpio on the i.MX51 babbage
board is a diagnostic LED according to the board design.
This patch adds the relevant device tree nodes to the
i.MX51 babbage device tree file to support this LED.
Signed-off-by: Liu Ying <Ying.Liu@xxxxxxxxxxxxx>
---
v1->v2:
* Rebase the patch from 3.14-rc2 to linux-next(d371ca32be).
* Rename the pinctrl name for the LED to be more generic.
* Switch to use the standard GPIO flag GPIO_ACTIVE_HIGH.
arch/arm/boot/dts/imx51-babbage.dts | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index ea5c67e..121dadd 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -81,6 +81,17 @@
};
};
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led-diagnostic {
+ label = "diagnostic";
+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
sound {
compatible = "fsl,imx51-babbage-sgtl5000",
"fsl,imx-audio-sgtl5000";
@@ -344,6 +355,12 @@
>;
};
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX51_PAD_EIM_D22__GPIO2_6 0x80000000
+ >;
+ };
+
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
