Parts of PHY code could be useful also for custom PHYs. For example,
Allwinner A83T has custom PHY which is probably Synopsys gen2 PHY
with few additional memory mapped registers, so most of the Synopsys PHY
related code could be reused.
Functions exported here are actually not specific to Synopsys PHYs but
to DWC HDMI controller PHY interface. This means that even if the PHY is
completely custom, i.e. not designed by Synopsys, exported functions can
be useful.
Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 44 +++++++++++++++++++++----------
include/drm/bridge/dw_hdmi.h | 11 ++++++++
2 files changed, 41 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 7ca14d7325b5..7d80f4b56683 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -1037,19 +1037,21 @@ static void dw_hdmi_phy_enable_svsret(struct dw_hdmi *hdmi, u8 enable)
HDMI_PHY_CONF0_SVSRET_MASK);
}
-static void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
+void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
{
hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET,
HDMI_PHY_CONF0_GEN2_PDDQ_MASK);
}
+EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_pddq);
-static void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
+void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
{
hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET,
HDMI_PHY_CONF0_GEN2_TXPWRON_MASK);
}
+EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_txpwron);
static void dw_hdmi_phy_sel_data_en_pol(struct dw_hdmi *hdmi, u8 enable)
{
@@ -1065,6 +1067,22 @@ static void dw_hdmi_phy_sel_interface_control(struct dw_hdmi *hdmi, u8 enable)
HDMI_PHY_CONF0_SELDIPIF_MASK);
}
+void dw_hdmi_phy_reset(struct dw_hdmi *hdmi)
+{
+ /* PHY reset. The reset signal is active high on Gen2 PHYs. */
+ hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ);
+ hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_phy_reset);
+
+void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address)
+{
+ hdmi_phy_test_clear(hdmi, 1);
+ hdmi_writeb(hdmi, address, HDMI_PHY_I2CM_SLAVE_ADDR);
+ hdmi_phy_test_clear(hdmi, 0);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_set_addr);
+
static void dw_hdmi_phy_power_off(struct dw_hdmi *hdmi)
{
const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
@@ -1203,16 +1221,11 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi)
if (phy->has_svsret)
dw_hdmi_phy_enable_svsret(hdmi, 1);
- /* PHY reset. The reset signal is active high on Gen2 PHYs. */
- hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ);
- hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ);
+ dw_hdmi_phy_reset(hdmi);
hdmi_writeb(hdmi, HDMI_MC_HEACPHY_RST_ASSERT, HDMI_MC_HEACPHY_RST);
- hdmi_phy_test_clear(hdmi, 1);
- hdmi_writeb(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2,
- HDMI_PHY_I2CM_SLAVE_ADDR);
- hdmi_phy_test_clear(hdmi, 0);
+ dw_hdmi_phy_i2c_set_addr(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2);
/* Write to the PHY as configured by the platform */
if (pdata->configure_phy)
@@ -1251,15 +1264,16 @@ static void dw_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
dw_hdmi_phy_power_off(hdmi);
}
-static enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
- void *data)
+enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
+ void *data)
{
return hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_HPD ?
connector_status_connected : connector_status_disconnected;
}
+EXPORT_SYMBOL_GPL(dw_hdmi_phy_read_hpd);
-static void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
- bool force, bool disabled, bool rxsense)
+void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
+ bool force, bool disabled, bool rxsense)
{
u8 old_mask = hdmi->phy_mask;
@@ -1271,8 +1285,9 @@ static void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
if (old_mask != hdmi->phy_mask)
hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
}
+EXPORT_SYMBOL_GPL(dw_hdmi_phy_update_hpd);
-static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
+void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
{
/*
* Configure the PHY RX SENSE and HPD interrupts polarities and clear
@@ -1291,6 +1306,7 @@ static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE),
HDMI_IH_MUTE_PHY_STAT0);
}
+EXPORT_SYMBOL_GPL(dw_hdmi_phy_setup_hpd);
static const struct dw_hdmi_phy_ops dw_hdmi_synopsys_phy_ops = {
.init = dw_hdmi_phy_init,
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index 182f83283e24..4a35e5065f6f 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -157,7 +157,18 @@ void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);
/* PHY configuration */
+void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address);
void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
unsigned char addr);
+enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
+ void *data);
+void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
+ bool force, bool disabled, bool rxsense);
+void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data);
+
+void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable);
+void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable);
+void dw_hdmi_phy_reset(struct dw_hdmi *hdmi);
+
#endif /* __IMX_HDMI_H__ */
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
