Re: [PATCH 1/2] iio:as3935: Add DT binding docs for AS3935 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Sun, Feb 9, 2014 at 1:54 PM, Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
> On 06/02/14 07:00, Matt Ranostay wrote:
>>
>> Document compatible string, required and optional DT properties for
>> AS3935 chipset driver.
>>
>> Signed-off-by: Matt Ranostay <mranostay@xxxxxxxxx>
>> ---
>>   .../devicetree/bindings/iio/proximity/as3935.txt   | 28
>> ++++++++++++++++++++++
>>   .../devicetree/bindings/vendor-prefixes.txt        |  1 +
>>   2 files changed, 29 insertions(+)
>>   create mode 100644
>> Documentation/devicetree/bindings/iio/proximity/as3935.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt
>> b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
>> new file mode 100644
>> index 0000000..574d49c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
>> @@ -0,0 +1,28 @@
>> +Austrian Microsystems AS3935 Franklin lightning sensor device driver
>> +
>> +Required properties:
>> +       - compatible: must be "ams,as3935"
>> +       - reg: SPI chip select number for the device
>> +       - spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI
>> +       slave node bindings.
>> +       - interrupt-parent : should be the phandle for the interrupt
>> controller
>> +       - interrupts : interrupt mapping for GPIO IRQ
>
> Why does it need to be a GPIO IRQ?  As far as I can see any irq will do
> (note there are devices that provide suitable interrupts without the ability
> to read the level).  Oops, we have a couple of other IIO bindings stating
> exactly this.  I doubt they need to be GPIOs either.
>
No it doesn't it can be any interrupt type... Will reword better


>
>> +
>> +       Refer to interrupt-controller/interrupts.txt for generic
>> +       interrupt client node bindings.
>> +
>> +Optional properties:
>> +       - ams,tune-cap: Calibration tuning capacitor stepping value 0 -
>> 15.
>> +         Range of 0 to 120 pF, 8pF steps. This will require using the
>> +         calibration data from the manufacturer.
>
> Why not have this as the actual value rather than a magic number?  Might
> as well keep the device tree as human readable as possible.
>

Makes sense.

>> +
>> +Example:
>> +
>> +as3935@0 {
>> +       compatible = "ams,as3935";
>> +       reg = <0>;
>> +       spi-cpha;
>> +       interrupt-parent = <&gpio1>;
>> +       interrupts = <16 1>;
>> +       ams,tune-cap = <10>;
>> +};
>> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt
>> b/Documentation/devicetree/bindings/vendor-prefixes.txt
>> index 3c31b40..9dd66ca 100644
>> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
>> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
>> @@ -10,6 +10,7 @@ aeroflexgaisler       Aeroflex Gaisler AB
>>   ak    Asahi Kasei Corp.
>>   altr  Altera Corp.
>>   amcc  Applied Micro Circuits Corporation (APM, formally AMCC)
>> +ams    AMS AG
>>   amstaos       AMS-Taos Inc.
>>   apm   Applied Micro Circuits Corporation (APM)
>>   arm   ARM Ltd.
>>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux