Some qcom platforms make some GPIOs or pins unavailable for use
by non-secure operating systems, and thus reading or writing the
registers for those pins will cause access control issues and
reset the device. With a DT/ACPI property to describe the set of
pins that are available for use, parse the available pins and set
the irq valid bits for gpiolib to know what to consider 'valid'.
This should avoid any issues with gpiolib. Furthermore, implement
the pinmux_ops::request function so that pinmux can also make
sure to not use pins that are unavailable.
Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
---
drivers/pinctrl/qcom/pinctrl-msm.c | 98 ++++++++++++++++++++++++++++++++++++--
1 file changed, 94 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 7a960590ecaa..4a251268ebc4 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -105,6 +105,17 @@ static const struct pinctrl_ops msm_pinctrl_ops = {
.dt_free_map = pinctrl_utils_free_map,
};
+static int msm_pinmux_request(struct pinctrl_dev *pctldev, unsigned offset)
+{
+ struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+ struct gpio_chip *chip = &pctrl->chip;
+
+ if (gpiochip_irqchip_irq_valid(chip, offset))
+ return 0;
+
+ return -EINVAL;
+}
+
static int msm_get_functions_count(struct pinctrl_dev *pctldev)
{
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
@@ -166,6 +177,7 @@ static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev,
}
static const struct pinmux_ops msm_pinmux_ops = {
+ .request = msm_pinmux_request,
.get_functions_count = msm_get_functions_count,
.get_function_name = msm_get_function_name,
.get_function_groups = msm_get_function_groups,
@@ -506,6 +518,9 @@ static void msm_gpio_dbg_show_one(struct seq_file *s,
"pull up"
};
+ if (!gpiochip_irqchip_irq_valid(chip, offset))
+ return;
+
g = &pctrl->soc->groups[offset];
ctl_reg = readl(pctrl->regs + g->ctl_reg);
@@ -516,7 +531,7 @@ static void msm_gpio_dbg_show_one(struct seq_file *s,
seq_printf(s, " %-8s: %-3s %d", g->name, is_out ? "out" : "in", func);
seq_printf(s, " %dmA", msm_regval_to_drive(drive));
- seq_printf(s, " %s", pulls[pull]);
+ seq_printf(s, " %s\n", pulls[pull]);
}
static void msm_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
@@ -524,10 +539,8 @@ static void msm_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
unsigned gpio = chip->base;
unsigned i;
- for (i = 0; i < chip->ngpio; i++, gpio++) {
+ for (i = 0; i < chip->ngpio; i++, gpio++)
msm_gpio_dbg_show_one(s, NULL, chip, i, gpio);
- seq_puts(s, "\n");
- }
}
#else
@@ -808,6 +821,76 @@ static void msm_gpio_irq_handler(struct irq_desc *desc)
chained_irq_exit(chip, desc);
}
+static int msm_gpio_init_irq_valid_mask(struct gpio_chip *chip,
+ struct msm_pinctrl *pctrl)
+{
+ int ret;
+ unsigned int len, i;
+ unsigned int max_gpios = pctrl->soc->ngpios;
+ struct device_node *np = pctrl->dev->of_node;
+
+ /* The number of GPIOs in the ACPI tables */
+ ret = device_property_read_u16_array(pctrl->dev, "gpios", NULL, 0);
+ if (ret > 0 && ret < max_gpios) {
+ u16 *tmp;
+
+ len = ret;
+ tmp = kmalloc_array(len, sizeof(tmp[0]), GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ ret = device_property_read_u16_array(pctrl->dev, "gpios", tmp,
+ len);
+ if (ret < 0) {
+ dev_err(pctrl->dev, "could not read list of GPIOs\n");
+ kfree(tmp);
+ return ret;
+ }
+
+ bitmap_zero(chip->irq_valid_mask, max_gpios);
+ for (i = 0; i < len; i++)
+ set_bit(tmp[i], chip->irq_valid_mask);
+
+ return 0;
+ }
+
+ /* If there's a DT ngpios-ranges property then add those ranges */
+ ret = of_property_count_u32_elems(np, "ngpios-ranges");
+ if (ret > 0 && ret % 2 == 0 && ret / 2 < max_gpios) {
+ u32 start;
+ u32 count;
+
+ len = ret / 2;
+ bitmap_zero(chip->irq_valid_mask, max_gpios);
+
+ for (i = 0; i < len; i++) {
+ of_property_read_u32_index(np, "ngpios-ranges",
+ i * 2, &start);
+ of_property_read_u32_index(np, "ngpios-ranges",
+ i * 2 + 1, &count);
+ bitmap_set(chip->irq_valid_mask, start, count);
+ }
+ }
+
+ return 0;
+}
+
+static bool msm_gpio_needs_irq_valid_mask(struct msm_pinctrl *pctrl)
+{
+ int ret;
+ struct device_node *np = pctrl->dev->of_node;
+
+ ret = device_property_read_u16_array(pctrl->dev, "gpios", NULL, 0);
+ if (ret > 0)
+ return true;
+
+ ret = of_property_count_u32_elems(np, "ngpios-ranges");
+ if (ret > 0 && ret % 2 == 0)
+ return true;
+
+ return false;
+}
+
static int msm_gpio_init(struct msm_pinctrl *pctrl)
{
struct gpio_chip *chip;
@@ -824,6 +907,7 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl)
chip->parent = pctrl->dev;
chip->owner = THIS_MODULE;
chip->of_node = pctrl->dev->of_node;
+ chip->irq_need_valid_mask = msm_gpio_needs_irq_valid_mask(pctrl);
ret = gpiochip_add_data(&pctrl->chip, pctrl);
if (ret) {
@@ -831,6 +915,12 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl)
return ret;
}
+ ret = msm_gpio_init_irq_valid_mask(chip, pctrl);
+ if (ret) {
+ dev_err(pctrl->dev, "Failed to setup irq valid bits\n");
+ return ret;
+ }
+
ret = gpiochip_add_pin_range(&pctrl->chip, dev_name(pctrl->dev), 0, 0, chip->ngpio);
if (ret) {
dev_err(pctrl->dev, "Failed to add pin range\n");
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
