From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxx> This commit add a document for a generic PECI hwmon driver. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxx> --- Documentation/hwmon/peci-hwmon | 74 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 Documentation/hwmon/peci-hwmon diff --git a/Documentation/hwmon/peci-hwmon b/Documentation/hwmon/peci-hwmon new file mode 100644 index 0000000..e0155b5 --- /dev/null +++ b/Documentation/hwmon/peci-hwmon @@ -0,0 +1,74 @@ +Kernel driver peci-hwmon +=============================== + +Supported chips: + Generic BMC chips provide PECI controller + +Author: + Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx> + + +Hardware Interfaces +------------------- + +This driver uses a PECI misc driver as a controller interface so one of PECI +misc drivers which provides compatible ioctls has to be enabled. + + +Description +----------- + +This driver implements a generic PECI hwmon feature which is running with a PECI +controller driver supports native PECI Client Command Suite for retrieving +temperatures of the CPU package, CPU cores and DIMM components. + +All temperature values are given in millidegree Celsius and will be measurable +only when the target CPU is powered on. + + +sysfs files +----------- + +temp1_input Provides current die temperature of the CPU package. +temp1_max Provides thermal control temperature of the CPU package + which is also known as Tcontrol. +temp1_crit Provides shutdown temperature of the CPU package which + is also known as the maximum processor junction + temperature, Tjmax or Tprochot. +temp1_crit_hyst Provides the hysteresis value from Tcontrol to Tjmax of + the CPU package. + +temp2_input Provides current DTS thermal margin to Tcontrol of the + CPU package. Value 0 means it reaches to Tcontrol + temperature. Sub-zero value means the die temperature + goes across Tconrtol to Tjmax. +temp2_min Provides the minimum DTS thermal margin to Tcontrol of + the CPU package. +temp2_lcrit Provides the value when the CPU package temperature + reaches to Tjmax. + +temp3_input Provides current Tcontrol temperature of the CPU + package which is also known as Fan Temperature target. + Indicates the relative value from thermal monitor trip + temperature at which fans should be engaged. +temp3_crit Provides Tcontrol critical value of the CPU package + which is same to Tjmax. + +temp4_input Provides current Tthrottle temperature of the CPU + package. Used for throttling temperature. If this value + is allowed and lower than Tjmax - the throttle will + occur and reported at lower than Tjmax. + +temp[100-127]_input Provides current core temperature. +temp[100-127]_max Provides thermal control temperature of the core. +temp[100-127]_crit Provides shutdown temperature of the core. +temp[100-127]_crit_hyst Provides the hysteresis value from Tcontrol to Tjmax of + the core. + +Note: + Core temperature group will be appeared when probing the driver if CPU + is online or when the first reading on other attr happens because it + needs cpu info reading. The number of generated core attrs depends on + the number of cores of the cpu package. + +temp[200-215]_input Provides current temperature of the DDR DIMM. -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
