Hi Laurent,
Dne torek, 09. januar 2018 ob 14:30:22 CET je Laurent Pinchart napisal(a):
> Hi Jernej,
>
> Thank you for the patch.
>
> On Saturday, 30 December 2017 23:01:56 EET Jernej Skrabec wrote:
> > Parts of PHY code could be useful also for custom PHYs. For example,
> > Allwinner A83T has custom PHY which is probably Synopsys gen2 PHY
> > with few additional memory mapped registers, so most of the Synopsys PHY
> > related code could be reused.
> >
> > It turns out that even completely custom HDMI PHYs, such as the one
> > found in Allwinner H3, can reuse some of those functions. This would
> > suggest that (some?) functions exported in this commit are actually part
> > of generic PHY interface and not really specific to Synopsys PHYs.
>
> That's correct, those functions control the interface between the HDMI
> controller and the PHY. They're not specific to Synopsys PHYs, but they're
> specific to the PHY interface as designed by Synopsys.
Ok, I'll update commit message.
>
> > Export useful PHY functions.
> >
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> > ---
> >
> > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 45
> > ++++++++++++++++++++-------
> > drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 2 ++
> > include/drm/bridge/dw_hdmi.h | 10 +++++++
> > 3 files changed, 44 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index
> > 7ca14d7325b5..67467d0b683a 100644
> > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > @@ -1037,19 +1037,21 @@ static void dw_hdmi_phy_enable_svsret(struct
> > dw_hdmi *hdmi, u8 enable) HDMI_PHY_CONF0_SVSRET_MASK);
> >
> > }
> >
> > -static void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
> > +void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
> >
> > {
> >
> > hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
> >
> > HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET,
> > HDMI_PHY_CONF0_GEN2_PDDQ_MASK);
> >
> > }
> >
> > +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_pddq);
> >
> > -static void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
> > +void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
> >
> > {
> >
> > hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
> >
> > HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET,
> > HDMI_PHY_CONF0_GEN2_TXPWRON_MASK);
> >
> > }
> >
> > +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_txpwron);
> >
> > static void dw_hdmi_phy_sel_data_en_pol(struct dw_hdmi *hdmi, u8 enable)
> > {
> >
> > @@ -1065,6 +1067,23 @@ static void
> > dw_hdmi_phy_sel_interface_control(struct
> > dw_hdmi *hdmi, u8 enable) HDMI_PHY_CONF0_SELDIPIF_MASK);
> >
> > }
> >
> > +void dw_hdmi_phy_gen2_reset(struct dw_hdmi *hdmi, u8 enable)
> > +{
> > + hdmi_mask_writeb(hdmi, enable, HDMI_MC_PHYRSTZ,
> > + HDMI_MC_PHYRSTZ_PHYRSTZ_OFFSET,
> > + HDMI_MC_PHYRSTZ_PHYRSTZ_MASK);
> > +}
> > +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_reset);
> > +
> > +void dw_hdmi_phy_set_slave_addr(struct dw_hdmi *hdmi)
> > +{
> > + hdmi_phy_test_clear(hdmi, 1);
> > + hdmi_writeb(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2,
> > + HDMI_PHY_I2CM_SLAVE_ADDR);
> > + hdmi_phy_test_clear(hdmi, 0);
> > +}
> > +EXPORT_SYMBOL_GPL(dw_hdmi_phy_set_slave_addr);
>
> Should the I2C address be passed as an argument ?
Yes, I already planned to do that for v2.
Best regards,
Jernej
>
> > static void dw_hdmi_phy_power_off(struct dw_hdmi *hdmi)
> > {
> >
> > const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
> >
> > @@ -1204,15 +1223,12 @@ static int hdmi_phy_configure(struct dw_hdmi
> > *hdmi)
> >
> > dw_hdmi_phy_enable_svsret(hdmi, 1);
> >
> > /* PHY reset. The reset signal is active high on Gen2 PHYs. */
> >
> > - hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ);
> > - hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ);
> > + dw_hdmi_phy_gen2_reset(hdmi, 1);
> > + dw_hdmi_phy_gen2_reset(hdmi, 0);
> >
> > hdmi_writeb(hdmi, HDMI_MC_HEACPHY_RST_ASSERT, HDMI_MC_HEACPHY_RST);
> >
> > - hdmi_phy_test_clear(hdmi, 1);
> > - hdmi_writeb(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2,
> > - HDMI_PHY_I2CM_SLAVE_ADDR);
> > - hdmi_phy_test_clear(hdmi, 0);
> > + dw_hdmi_phy_set_slave_addr(hdmi);
> >
> > /* Write to the PHY as configured by the platform */
> > if (pdata->configure_phy)
> >
> > @@ -1251,15 +1267,16 @@ static void dw_hdmi_phy_disable(struct dw_hdmi
> > *hdmi, void *data) dw_hdmi_phy_power_off(hdmi);
> >
> > }
> >
> > -static enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi
> > *hdmi, - void *data)
> > +enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> > + void *data)
> >
> > {
> >
> > return hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_HPD ?
> >
> > connector_status_connected : connector_status_disconnected;
> >
> > }
> >
> > +EXPORT_SYMBOL_GPL(dw_hdmi_phy_read_hpd);
> >
> > -static void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> > - bool force, bool disabled, bool rxsense)
> > +void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> > + bool force, bool disabled, bool rxsense)
> >
> > {
> >
> > u8 old_mask = hdmi->phy_mask;
> >
> > @@ -1271,8 +1288,9 @@ static void dw_hdmi_phy_update_hpd(struct dw_hdmi
> > *hdmi, void *data, if (old_mask != hdmi->phy_mask)
> >
> > hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
> >
> > }
> >
> > +EXPORT_SYMBOL_GPL(dw_hdmi_phy_update_hpd);
> >
> > -static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
> > +void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
> >
> > {
> >
> > /*
> >
> > * Configure the PHY RX SENSE and HPD interrupts polarities and clear
> >
> > @@ -1291,6 +1309,7 @@ static void dw_hdmi_phy_setup_hpd(struct dw_hdmi
> > *hdmi, void *data) hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD |
> > HDMI_IH_PHY_STAT0_RX_SENSE), HDMI_IH_MUTE_PHY_STAT0);
> >
> > }
> >
> > +EXPORT_SYMBOL_GPL(dw_hdmi_phy_setup_hpd);
> >
> > static const struct dw_hdmi_phy_ops dw_hdmi_synopsys_phy_ops = {
> >
> > .init = dw_hdmi_phy_init,
> >
> > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> > b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h index
> > 9d90eb9c46e5..fd150430d0b3 100644
> > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> > @@ -950,6 +950,8 @@ enum {
> >
> > /* MC_PHYRSTZ field values */
> >
> > HDMI_MC_PHYRSTZ_PHYRSTZ = 0x01,
> >
> > + HDMI_MC_PHYRSTZ_PHYRSTZ_OFFSET = 0x00,
> > + HDMI_MC_PHYRSTZ_PHYRSTZ_MASK = 0x01,
> >
> > /* MC_HEACPHY_RST field values */
> >
> > HDMI_MC_HEACPHY_RST_ASSERT = 0x1,
> >
> > diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
> > index 182f83283e24..f5cca4362154 100644
> > --- a/include/drm/bridge/dw_hdmi.h
> > +++ b/include/drm/bridge/dw_hdmi.h
> > @@ -159,5 +159,15 @@ void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);
> >
> > /* PHY configuration */
> > void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
> >
> > unsigned char addr);
> >
> > +enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> > + void *data);
> > +void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> > + bool force, bool disabled, bool rxsense);
> > +void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data);
> > +
> > +void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable);
> > +void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable);
> > +void dw_hdmi_phy_gen2_reset(struct dw_hdmi *hdmi, u8 enable);
> > +void dw_hdmi_phy_set_slave_addr(struct dw_hdmi *hdmi);
> >
> > #endif /* __IMX_HDMI_H__ */
>
> --
> Regards,
>
> Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
