The two usb-phy nodes are not memory-mapped devices on the
SoC but rather dummy phys for SoCs with transparent autonomous
NOP phys. Move these to outside soc0 to their own node like
done elsewhere.
Signed-off-by: Andrew F. Davis <afd@xxxxxx>
Acked-by: Nishanth Menon <nm@xxxxxx>
---
arch/arm/boot/dts/keystone-k2g.dtsi | 28 ++++++++++++++++++----------
1 file changed, 18 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index d83dbfe24b49..cdaf519721b1 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -69,6 +69,24 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
};
+ usbphy {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "simple-bus";
+
+ usb0_phy: usb-phy@0 {
+ compatible = "usb-nop-xceiv";
+ reg = <0>;
+ status = "disabled";
+ };
+
+ usb1_phy: usb-phy@1 {
+ compatible = "usb-nop-xceiv";
+ reg = <1>;
+ status = "disabled";
+ };
+ };
+
soc0: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
@@ -465,11 +483,6 @@
status = "disabled";
};
- usb0_phy: usb-phy@0 {
- compatible = "usb-nop-xceiv";
- status = "disabled";
- };
-
keystone_usb0: keystone-dwc3@2680000 {
compatible = "ti,keystone-dwc3";
#address-cells = <1>;
@@ -493,11 +506,6 @@
};
};
- usb1_phy: usb-phy@1 {
- compatible = "usb-nop-xceiv";
- status = "disabled";
- };
-
keystone_usb1: keystone-dwc3@2580000 {
compatible = "ti,keystone-dwc3";
#address-cells = <1>;
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
