Remove empty lines, useless comments and sort rules by alphabetical order. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxxxxxxxxxxx> --- Hi Bjorn, This is the kernel oops I get when I test this patch. I've applied it on top of the series for the Cadence PCIe controller. I didn't have time to investigate more yet, sorry! kernel BUG at drivers/base/driver.c:153! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc4+ #151 Hardware name: Cadence CSP (DT) pstate: 40000005 (nZcv daif -PAN -UAO) pc : driver_register+0xc0/0xf8 lr : pcie_port_service_register+0x4c/0x60 sp : ffffffc006457d90 x29: ffffffc006457d90 x28: 0000000000000000 x27: ffffff80086e2028 x26: ffffff800884a000 x25: ffffff8008690474 x24: ffffff80086d7068 x23: ffffff800868b0b8 x22: ffffff80086d7078 x21: 0000000000000000 x20: ffffff80088692d4 x19: ffffff80086af380 x18: 0000000000000000 x17: 000000000000037f x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000400 x13: 0000000000000001 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000980 x9 : ffffffc006457b60 x8 : ffffffc0064589e0 x7 : ffffffc006458100 x6 : 000000000000a6e8 x5 : 000000000000a6e8 x4 : 0000000000000000 x1 : ffffff800881d720 x0 : ffffff800881c820 Process swapper/0 (pid: 1, stack limit = 0x00000000d680c8f0) Call trace: driver_register+0xc0/0xf8 pcied_init+0x24/0x7c do_one_initcall+0x38/0x120 kernel_init_freeable+0x134/0x1d0 kernel_init+0x10/0x100 ret_from_fork+0x10/0x18 Code: 2a1403e0 a94153f3 a8c27bfd d65f03c0 (d4210000) Best regards, Cyrille drivers/pci/Makefile | 84 +++++++++++++++++++++------------------------------- 1 file changed, 33 insertions(+), 51 deletions(-) diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 3b6c22afb2aa..fd4401cf1b4a 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -3,57 +3,39 @@ # Makefile for the PCI bus specific drivers. # -obj-$(CONFIG_PCI) += access.o bus.o probe.o host-bridge.o remove.o pci.o \ - pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \ - irq.o vpd.o setup-bus.o vc.o mmap.o setup-irq.o +ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG +# PCI core +obj-$(CONFIG_ACPI) += pci-acpi.o +obj-$(CONFIG_HOTPLUG_PCI) += hotplug/ +obj-$(CONFIG_PCI) += access.o bus.o probe.o host-bridge.o \ + remove.o pci.o pci-driver.o search.o \ + pci-sysfs.o rom.o setup-res.o irq.o \ + vpd.o setup-bus.o vc.o mmap.o \ + setup-irq.o ifdef CONFIG_PCI -obj-$(CONFIG_PROC_FS) += proc.o -obj-$(CONFIG_SYSFS) += slot.o -obj-$(CONFIG_OF) += of.o +obj-$(CONFIG_OF) += of.o +obj-$(CONFIG_PROC_FS) += proc.o +obj-$(CONFIG_SYSFS) += slot.o endif - -obj-$(CONFIG_PCI_QUIRKS) += quirks.o - -# Build PCI Express stuff if needed -obj-$(CONFIG_PCIEPORTBUS) += pcie/ - -# Build the PCI Hotplug drivers if we were asked to -obj-$(CONFIG_HOTPLUG_PCI) += hotplug/ - -# Build the PCI MSI interrupt support -obj-$(CONFIG_PCI_MSI) += msi.o - -obj-$(CONFIG_PCI_ATS) += ats.o -obj-$(CONFIG_PCI_IOV) += iov.o - -# -# ACPI Related PCI FW Functions -# ACPI _DSM provided firmware instance and string name -# -obj-$(CONFIG_ACPI) += pci-acpi.o - -# SMBIOS provided firmware instance and labels -obj-$(CONFIG_PCI_LABEL) += pci-label.o - -# Intel MID platform PM support -obj-$(CONFIG_X86_INTEL_MID) += pci-mid.o - -obj-$(CONFIG_PCI_SYSCALL) += syscall.o - -obj-$(CONFIG_PCI_STUB) += pci-stub.o - -obj-$(CONFIG_PCI_ECAM) += ecam.o - -obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o - -ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG - -# PCI host controller drivers -obj-y += host/ -obj-y += switch/ - -obj-$(CONFIG_PCI_ENDPOINT) += endpoint/ -obj-$(CONFIG_PCIE_CADENCE) += cadence/ -# PCI dwc controller drivers -obj-y += dwc/ +obj-$(CONFIG_PCIEPORTBUS) += pcie/ +obj-$(CONFIG_PCI_ATS) += ats.o +obj-$(CONFIG_PCI_ECAM) += ecam.o +obj-$(CONFIG_PCI_IOV) += iov.o +obj-$(CONFIG_PCI_LABEL) += pci-label.o +obj-$(CONFIG_PCI_MSI) += msi.o +obj-$(CONFIG_PCI_QUIRKS) += quirks.o +obj-$(CONFIG_PCI_STUB) += pci-stub.o +obj-$(CONFIG_PCI_SYSCALL) += syscall.o +obj-$(CONFIG_X86_INTEL_MID) += pci-mid.o +obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o + +# PCI controllers +obj-y += host/ +obj-y += switch/ +obj-$(CONFIG_PCI_ENDPOINT) += endpoint/ + +# PCI controllers supporting both host and endpoint modes: +# their associated drivers must currently be linked after the EPC/EPF libraries +obj-$(CONFIG_PCIE_CADENCE) += cadence/ +obj-y += dwc/ -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
