Hi Kishon, Le 03/01/2018 à 10:14, Kishon Vijay Abraham I a écrit : > Hi, > > On Saturday 30 December 2017 02:23 AM, Cyrille Pitchen wrote: >> Hi Kishon, >> >> Le 28/12/2017 à 14:00, Kishon Vijay Abraham I a écrit : >>> Hi Cyrille, >>> >>> On Monday 18 December 2017 11:46 PM, Cyrille Pitchen wrote: >>>> Hi all, >>>> >>>> this series of patches adds support to the Cadence PCIe controller. >>>> It was tested on a ARM64 platform emulated by a Palladium running the >>>> pci-next kernel. >>>> >>>> The host mode was tested with some PCIe devices connected to the Palladium >>>> through a speed-bridge. Some of those devices were a USB host controller >>>> and a SATA controller. The PCIe host controller was also tested with a >>>> second controller configured in endpoint mode and connected back to back >>>> to the first controller. >>>> >>>> The EndPoint Controller (EPC) driver of this series was tested with the >>>> pci-epf-test.c EndPoint Function (EPF) driver and the pcitest userspace >>>> program. >>> >>> Did you get to test multi function EP? >>> >> >> No I didn't: I tested only with a single function to check for regression >> but currently I'm not able to test with multiple functions. >> >> With devmem, I've tried to read then write the Physical Function Configuration >> Register (offset 0x2c0 in the Local Management registers) to enable >> functions other than function 0. >> >> This is the CDNS_PCIE_LM_EP_FUNC_CFG register that the pcie-cadence_ep.c >> driver updates in cdns_pcie_ep_write_header() since v2 of the series. >> >> As written in the datasheet, BIT(0) is actually hard-wired to 1, hence >> function 0 can't be disabled: that makes sense. However other function >> enable bits were read as 0 whereas the datasheet claims they should be set >> at power up. Besides, I can't set any of them with devmem. >> >> Actually, I have 2 slightly different datasheets, in the first one I should >> have 4 functions but only 2 based on the second datasheet. >> >> Then I guess it's a design parameter used when synthesizing the controller. >> >> So I've asked Cadence whether I've missed or misunderstood something in the >> datasheets or whether the IP they provided me with has a single function >> for now. I'm waiting for their answers. > > hmm.. It would be nice to have multi function tested since it would both > validate multi function support of PCI EP core and the cadence multi-function > itself. > I will work with Cadence so we try to make it work. Best regards, Cyrille > Thanks > Kishon > -- Cyrille Pitchen, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
