* Rafael J. Wysocki <rafael@xxxxxxxxxx> [171229 23:52]: > On Fri, Dec 29, 2017 at 6:57 PM, Tony Lindgren <tony@xxxxxxxxxxx> wrote: > > * Jeffy Chen <jeffy.chen@xxxxxxxxxxxxxx> [171226 02:11]: > >> We are going to handle PCIe WAKE# pin for PCI devices in the pci core, > >> so add definitions of the optional PCIe WAKE# pin for PCI devices. > >> > >> Also add an definition of the optional PCI interrupt pin for PCI > >> devices to distinguish it from the PCIe WAKE# pin. > > > >> --- a/Documentation/devicetree/bindings/pci/pci.txt > >> +++ b/Documentation/devicetree/bindings/pci/pci.txt > >> @@ -24,3 +24,13 @@ driver implementation may support the following properties: > >> unsupported link speed, for instance, trying to do training for > >> unsupported link speed, etc. Must be '4' for gen4, '3' for gen3, '2' > >> for gen2, and '1' for gen1. Any other values are invalid. > >> + > >> +PCI devices may support the following properties: > > > > This should say PCI ports instead of PCI devices. > > No, it is more accurate to say "PCI devices". > > Well, it actually gets somewhat confusing, because in the PCI > terminology a "PCI device" means a physical piece of hardware that can > be put into a single "slot" (think socket on a board) and may consist > up to 8 functional units called "functions" which are each represented > by a struct pci_dev. So there may be up to 8 struct pci_dev objects > per "PCI device" (as per the standard language) and, BTW, drivers bind > to functions (via the struct pci_dev objects). OK then let's stick to "PCI devices". > Now, WAKE# is shared by all functions within the same "PCI device" > (I'm not sure if the standard specifies that directly, but at least it > appears to be treated as an obvious physical limitation), so it may be > useful to represent the "slot" or "device" level in the DT even though > it has no struct device based representation in the kernel. Yeah that makes sense as there is only one WAKE# line in the slot :) Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
