Re: [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 07/02/14 15:19, Thomas Abraham wrote:
> From: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> 
> Add a new optional boost-frequency binding for specifying the frequencies
> usable in boost mode.
> 
> Cc: Nishanth Menon <nm@xxxxxx>
> Cc: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Pawel Moll <pawel.moll@xxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
> Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt |   11 +++++++++++
>  1 file changed, 11 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt
> 
> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt
> new file mode 100644
> index 0000000..d925e38
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt
> @@ -0,0 +1,11 @@
> +* Device tree binding for CPU boost frequency (aka over-clocking)
> +
> +Certain CPU's can be operated in optional 'boost' mode (or sometimes referred as
> +overclocking) in which the CPU can operate in frequencies beyond the normal
> +operating conditions.
> +
> +Optional Properties:
> +- boost-frequency: list of frequencies in KHz to be used only in boost mode.
> +  This list should be a subset of frequencies listed in "operating-points"
> +  property. Refer to Documentation/devicetree/bindings/power/opp.txt for
> +  details about "operating-points" property.
> 

Won't single entry for boost frequency suffice which would be the starting
frequency in the boost range. IWO will there be OPP list with frequencies:
A > B > C > D, but only B and C are boost frequency. That seems little odd,
unless it's some configuration chosen purely on software basis rather than
hardware. For me B marks the beginning of over-clocking.

Regards,
Sudeep

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux