Thank Bjorn for the Review.
On 01/01/18 23:29, Bjorn Andersson wrote:
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index b81374bb6713..1daa39925dd4 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -97,4 +97,12 @@ config QCOM_WCNSS_CTRL
Client driver for the WCNSS_CTRL SMD channel, used to download nv
firmware to a newly booted WCNSS chip.
+config QCOM_APR
+ tristate "Qualcomm APR Bus (Asynchronous Packet Router)"
+ depends on (RPMSG_QCOM_SMD || RPMSG_QCOM_GLINK_RPM)
The actual dependency you have is RPMSG. Specifying the individual
transports here causes additional restrictions in how you can mix and
match modules vs builtin (e.g. glink being builtin to get regulators
early and smd built as a module forces apr to be built as a module)
I agree, Will fix this in next version.
+++ b/drivers/soc/qcom/apr.c
@@ -0,0 +1,395 @@
+/* SPDX-License-Identifier: GPL-2.0
+* Copyright (c) 2011-2016, The Linux Foundation
+* Copyright (c) 2017, Linaro Limited
+*/
For some tooling reason the SPDX line should be // commented, i.e this
should be:
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2011-2016, The Linux Foundation
* Copyright (c) 2017, Linaro Limited
*/
Yep, this was also considered for next version.
+
...
+
+/* Static CORE service on the ADSP */
+static const struct apr_device_id core_svc_device_id =
+ ADSP_AUDIO_APR_DEV("CORE", APR_SVC_ADSP_CORE);
How does this work out when we want to use APR for the modem services?
So the plan is, If the modem service can be queried using AVCS core
commands then it would be added dynamically from q6core driver else we
can add is as static service into this list.
+
+/**
+ * apr_send_pkt() - Send a apr message from apr device
+ *
+ * @adev: Pointer to previously registered apr device.
+ * @buf: Pointer to buffer to send
+ *
+ * Return: Will be an negative on packet size on success.
+ */
+int apr_send_pkt(struct apr_device *adev, uint32_t *buf)
So buf here is a struct apr_hdr followed by arbitrary data. Passing a
reference to an arbitrary chunk of data should be done with a void *.
But you could turn struct apr_hdr into struct apr_packet by adding a
flexible array member at the end of the struct and having this function
take that data type. This would make the prototype self-documenting.
I do, however, not fancy the asymmetry of the send/callback interface
exposed to the client. One takes the raw packet, as it sits in the
transport and the other creates an abstract representation of the same.
Can't you in the callback verify the data and then just pass the same
object up to the client?
I can try it and see how it looks.
+{
...
+
+static int qcom_rpmsg_q6_callback(struct rpmsg_device *rpdev, void *buf,
+ int len, void *priv, u32 addr)
+{
+ struct apr *apr = dev_get_drvdata(&rpdev->dev);
+ struct apr_client_data data;
+ struct apr_device *p, *c_svc = NULL;
+ struct apr_driver *adrv = NULL;
+ struct apr_hdr *hdr;
+ uint16_t hdr_size;
+ uint16_t msg_type;
+ uint16_t ver;
+ uint16_t src;
+ uint16_t svc;
+
+ if (!buf || len <= APR_HDR_SIZE) {
rpmsg should never call you with buf = NULL, so no reason to check for
that.
Yep!
+ dev_err(apr->dev, "APR: Improper apr pkt received:%p %d\n",
+ buf, len);
+ return -EINVAL;
+ }
...
+
+ if (hdr->src_domain >= APR_DOMAIN_MAX ||
+ hdr->dest_domain >= APR_DOMAIN_MAX ||
+ hdr->src_svc >= APR_SVC_MAX ||
+ hdr->dest_svc >= APR_SVC_MAX) {
+ dev_err(apr->dev, "APR: Wrong APR header\n");
+ return -EINVAL;
+ }
+
+ svc = hdr->dest_svc;
+ src = apr->data->get_data_src(hdr);
Couldn't we just use src_domain here instead of maintaining this mapping
table in the driver?
Yes, we can do that too, I will give that a go.
Also, looking at the send function, isn't this src just c_svc->svc_id?
src here represents mapping between domain and dest id. It is not same
as svc_id.
+ if (src == APR_DEST_MAX)
+ return -EINVAL;
+
+ spin_lock(&apr->svcs_lock);
+ list_for_each_entry(p, &apr->svcs, node) {
+ if (svc == p->svc_id) {
+ c_svc = p;
+ if (c_svc->dev.driver)
+ adrv = to_apr_driver(c_svc->dev.driver);
+ break;
+ }
+ }
Keep your services in a idr, keyed by svc_id. This will make the search
O(log(n)), but more importantly it would replace this loop with a single
idr_find().
I will try it and see how it looks!
+ spin_unlock(&apr->svcs_lock);
+
+ if (!adrv) {
+ dev_err(apr->dev, "APR: service is not registered\n");
+ return -EINVAL;
+ }
+
+ data.payload_size = hdr->pkt_size - hdr_size;
+ data.opcode = hdr->opcode;
+ data.src = src;
+ data.src_port = hdr->src_port;
+ data.dest_port = hdr->dest_port;
+ data.token = hdr->token;
+ data.msg_type = msg_type;
+
+ if (data.payload_size > 0)
+ data.payload = (char *)hdr + hdr_size;
Using buf + hdr_size probably makes even more sense, and saves you from
the typecast.
Agree!
+
+ adrv->callback(c_svc, &data);
+
+ return 0;
+}
+
+static const struct apr_device_id *apr_match(const struct apr_device_id *id,
+ const struct apr_device *adev)
+{
+ while (id->domain_id != 0 || id->svc_id != 0) {
+ if (id->domain_id == adev->domain_id &&
+ id->svc_id == adev->svc_id &&
+ id->client_id == adev->client_id)
Is the client_id significant here? As far as I can tell it's a
identifier of the local "function". Are there multiple client drivers
that would "attach" to the same remote service?
No. svc id is unique per client id, so it redundant check as you said.
+ return id;
+ id++;
+ }
+ return NULL;
+}
+
+static int apr_device_match(struct device *dev, struct device_driver *drv)
+{
+ struct apr_device *adev = to_apr_device(dev);
+ struct apr_driver *adrv = to_apr_driver(drv);
+
+ return !!apr_match(adrv->id_table, adev);
If this remain the only caller of apr_match() you could just inline the
loop here.
Makes sense.
+}
+
+static int apr_device_probe(struct device *dev)
+{
+ struct apr_device *adev;
+ struct apr_driver *adrv;
You don't indent things elsewhere.
Yep.
+ int ret = 0;
+
+ adev = to_apr_device(dev);
+ adrv = to_apr_driver(dev->driver);
+
+ ret = adrv->probe(adev);
Drop ret and just return adrv->probe()
yep
+
+ return ret;
+}
+
...
+
+/**
+ * apr_add_device() - Add a new apr device
+ *
+ * @dev: Pointer to apr device.
+ * @id: Pointer to apr device id to add.
+ *
+ * Return: Will be an negative on error or a zero on success.
+ */
+int apr_add_device(struct device *dev, const struct apr_device_id *id)
+{
+ struct apr *apr = dev_get_drvdata(dev);
It's not obvious which dev this is, but it has to be the rpmsg device or
this would dereference the drvdata of the wrong type and things would be
very bad.
How about making this more explicit by just taking a struct apr * as
first argument, and then provide a helper for clients to acquire the
struct apr * from the parent dev, if this is needed.
Yep, that makes it much cleaner, will do it in next version.
+ struct apr_device *adev = NULL;
+
+ if (!apr)
+ return -EINVAL;
+
+ adev = kzalloc(sizeof(*adev), GFP_KERNEL);
+ if (!adev)
+ return -ENOMEM;
+
+ spin_lock_init(&adev->lock);
+
+ adev->svc_id = id->svc_id;
+ adev->dest_id = apr->dest_id;
+ adev->client_id = id->client_id;
+ adev->domain_id = id->domain_id;
Wouldn't this always be the domain of the apr? (or we're adding a device
to the wrong apr)
Yes, it is.
+ adev->version = id->svc_version;
+
+ adev->dev.bus = &aprbus_type;
+ adev->dev.parent = dev;
+ adev->dev.release = apr_dev_release;
+ adev->dev.driver = NULL;
+
+ dev_set_name(&adev->dev, "apr:%s:%x:%x:%x", id->name, id->domain_id,
+ id->svc_id, id->client_id);
+
+ spin_lock(&apr->svcs_lock);
+ list_add_tail(&adev->node, &apr->svcs);
+ spin_unlock(&apr->svcs_lock);
This causes svcs to contain entries related to devices that has not been
matched and probed yet (e.g. implementation is in a kernel module not
loaded). I think you should move this to apr_device_probe().
Yep!
+
+ return device_register(&adev->dev);
+}
+EXPORT_SYMBOL_GPL(apr_add_device);
+
...
+static int apr_v2_get_data_src(struct apr_hdr *hdr)
+{
+ if (hdr->src_domain == APR_DOMAIN_MODEM)
+ return APR_DEST_MODEM;
+ else if (hdr->src_domain == APR_DOMAIN_ADSP)
+ return APR_DEST_QDSP6;
+
+ return APR_DEST_MAX;
The idiomatic return value here would be -EINVAL.
yep!, I try it this would also change logic at caller side.
+}
+
+/*
+
+static const struct apr_data apr_v2_data = {
+ .get_data_src = apr_v2_get_data_src,
+ .dest_id = APR_DEST_QDSP6,
+};
+
+static const struct of_device_id qcom_rpmsg_q6_of_match[] = {
+ { .compatible = "qcom,apr-msm8996", .data = &apr_v2_data},
The dest_id of apr_v2_data and the use of "q6" in the name indicates
that this is the "msm8996 adsp apr", what's your plan to support other
apr remotes?
We would need one more entry for modem case, like db410c cases, Will add
this as we move on.
How about making the domain id a property of the apr in DT and then just
list the clients as nodes with svc_id, svc_version and client_id? You
can still match by device_id (compatible can be optional), but that
would allow you to describe either the adsp or modem apr link, of any
platform (of that apr version), with the same compatible.
This will work too!
Current design I had in mind was to get the q6core service up and this
can query what AVCS static services are available on remote side and
then add apr devices.
If we go with dt approch we might not need q6core driver, but on the
other hand we need to be aware of svc major and minor version, which
might be specific to the dsp firmware running on. Also we might endup
talking on services without querying the dsp state.
May be we should do some offline disussion on this!
+ {}
+};
+
+static struct rpmsg_driver qcom_rpmsg_q6_driver = {
+ .probe = qcom_rpmsg_q6_probe,
+ .remove = qcom_rpmsg_q6_remove,
+ .callback = qcom_rpmsg_q6_callback,
+ .drv = {
+ .name = "qcom_rpmsg_q6",
+ .owner = THIS_MODULE,
Drop the owner.
Yep!
+ .of_match_table = qcom_rpmsg_q6_of_match,
+ },
Indentation.
Sure!
+};
+
+static int __init apr_init(void)
+{
+ int ret;
+
+ ret = register_rpmsg_driver(&qcom_rpmsg_q6_driver);
+ if (!ret)
+ return bus_register(&aprbus_type);
Register the bus first, then the rpmsg driver.
yep!
+
+ return ret;
+}
+
...
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index abb6dc2ebbf8..068d215c3be6 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -452,6 +452,19 @@ struct spi_device_id {
kernel_ulong_t driver_data; /* Data private to the driver */
};
+
One newline is enough.
yep
+#define APR_NAME_SIZE 32
+#define APR_MODULE_PREFIX "apr:"
+
+struct apr_device_id {
+ char name[APR_NAME_SIZE];
Does this name has any meaning? As far as I can see we're matching on
the other parameters and use the name only to name the device.
No, it just to give the device a usefull name.
+ __u32 domain_id;
+ __u32 svc_id;
+ __u32 client_id;
+ __u32 svc_version;
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
#define SPMI_NAME_SIZE 32
#define SPMI_MODULE_PREFIX "spmi:"
diff --git a/include/linux/soc/qcom/apr.h b/include/linux/soc/qcom/apr.h
new file mode 100644
index 000000000000..8620289c34ab
--- /dev/null
+++ b/include/linux/soc/qcom/apr.h
...
+
+#define APR_DL_SMD 0
+#define APR_DL_MAX 1
Unused.
will remove it.
+
...
+#define APR_HDR_SIZE sizeof(struct apr_hdr)
+#define APR_SEQ_CMD_HDR_FIELD APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD, \
+ APR_HDR_LEN(APR_HDR_SIZE), \
+ APR_PKT_VER)
So for the tx path these macros are to be used by the client and for the
rx path they are to be used by the apr driver. Better make the api
symmetrical.
Will try that in next version.
One possible path is to use an sk_buf for the tx-path and reserve space
for the header, then pass the abstract version of the packet and let the
apr driver fill out the header.
In some cases like q6asm the apr header port numbers are much more
specific to the service and they change depening on stream and session
ids within the service.
+
+struct apr_client_data {
Perhaps name this apr_client_message or similar, to indicate that this
is not a per-client thing, but a description of a message/packet.
make sense, Will change it to apr_client_message.
+ uint16_t payload_size;
...
+ void *payload;
+};
+
Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
