Hi Jacopo, On Wednesday, 3 January 2018 10:49:52 EET jacopo mondi wrote: > On Tue, Jan 02, 2018 at 01:45:30PM +0200, Laurent Pinchart wrote: > > On Thursday, 28 December 2017 16:01:13 EET Jacopo Mondi wrote: > >> Add bindings documentation for Renesas Capture Engine Unit (CEU). > >> > >> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> > >> --- > >> > >> .../devicetree/bindings/media/renesas,ceu.txt | 85 +++++++++++++++ > >> 1 file changed, 85 insertions(+) > >> create mode 100644 > >> Documentation/devicetree/bindings/media/renesas,ceu.txt > >> > >> diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.txt > >> b/Documentation/devicetree/bindings/media/renesas,ceu.txt new file mode > >> 100644 > >> index 0000000..f45628e > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/media/renesas,ceu.txt > >> @@ -0,0 +1,85 @@ > >>+Renesas Capture Engine Unit (CEU) > >> +---------------------------------------------- > >> + > >> +The Capture Engine Unit is the image capture interface found on Renesas > >> +RZ chip series and on SH Mobile ones. > > > > "ones" sound a bit weird. How about "... found in the Renesas SH Mobil and > > RZ SoCs." ? > > > >> +The interface supports a single parallel input with data bus width up > >> to > >> +8/16 bits. > > > > What do you mean by "up to 8/16 bits" ? > > The input bus width can be 8 or 16 bit. Then how about writing it "The CEU supports a single parallel input with a data bus width of 8 or 16 bits." ? > On a general note: I always assumed DT bindings should describe the > hardware capabilities. In this case the hardware supports 8 or 16 bits > as input width, but the driver only cares about the 8 bits case. Which > one should I describe here? You should describe the hardware. > I will fix all of yours and Geert's remarks in V3. [snip] -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
