Use new binding about USB wakeup which now supports multi USB wakeup glue layer between SSUSB and SPM. Meanwhile remove dummy clocks of USB wakeup. Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> --- arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 2 +- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 +++--------- 2 files changed, 4 insertions(+), 10 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index 1c3634f..0acba1f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -505,7 +505,7 @@ vbus-supply = <&usb_p0_vbus>; extcon = <&extcon_usb>; dr_mode = "otg"; - mediatek,enable-wakeup; + wakeup-source; pinctrl-names = "default", "id_float", "id_ground"; pinctrl-0 = <&usb_id_pins_float>; pinctrl-1 = <&usb_id_pins_float>; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 26396ef..9263d9f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -731,15 +731,9 @@ <&u3port0 PHY_TYPE_USB3>, <&u2port1 PHY_TYPE_USB2>; power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; - clocks = <&topckgen CLK_TOP_USB30_SEL>, - <&clk26m>, - <&pericfg CLK_PERI_USB0>, - <&pericfg CLK_PERI_USB1>; - clock-names = "sys_ck", - "ref_ck", - "wakeup_deb_p0", - "wakeup_deb_p1"; - mediatek,syscon-wakeup = <&pericfg>; + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; + clock-names = "sys_ck", "ref_ck"; + mediatek,syscon-wakeup = <&pericfg 0x400 1>; #address-cells = <2>; #size-cells = <2>; ranges; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
