Re: [RESEND PATCH v2 08/15] ASoC: qcom: q6asm: add support to audio stream apis

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu 14 Dec 09:33 PST 2017, srinivas.kandagatla@xxxxxxxxxx wrote:

> From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> 
> This patch adds support to open, write and media format commands
> in the q6asm module.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
>  sound/soc/qcom/qdsp6/q6asm.c | 530 ++++++++++++++++++++++++++++++++++++++++++-
>  sound/soc/qcom/qdsp6/q6asm.h |  42 ++++
>  2 files changed, 571 insertions(+), 1 deletion(-)
> 
> diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c
> index 4be92441f524..dabd6509ef99 100644
> --- a/sound/soc/qcom/qdsp6/q6asm.c
> +++ b/sound/soc/qcom/qdsp6/q6asm.c
> @@ -8,16 +8,34 @@
>  #include <linux/soc/qcom/apr.h>
>  #include <linux/device.h>
>  #include <linux/platform_device.h>
> +#include <uapi/sound/asound.h>
>  #include <linux/delay.h>
>  #include <linux/slab.h>
>  #include <linux/mm.h>
>  #include "q6asm.h"
>  #include "common.h"
>  
> +#define ASM_STREAM_CMD_CLOSE			0x00010BCD
> +#define ASM_STREAM_CMD_FLUSH			0x00010BCE
> +#define ASM_SESSION_CMD_PAUSE			0x00010BD3
> +#define ASM_DATA_CMD_EOS			0x00010BDB
> +#define DEFAULT_POPP_TOPOLOGY			0x00010BE4
> +#define ASM_STREAM_CMD_FLUSH_READBUFS		0x00010C09
>  #define ASM_CMD_SHARED_MEM_MAP_REGIONS		0x00010D92
>  #define ASM_CMDRSP_SHARED_MEM_MAP_REGIONS	0x00010D93
>  #define ASM_CMD_SHARED_MEM_UNMAP_REGIONS	0x00010D94
> -
> +#define ASM_DATA_CMD_MEDIA_FMT_UPDATE_V2	0x00010D98
> +#define ASM_DATA_EVENT_WRITE_DONE_V2		0x00010D99
> +#define ASM_SESSION_CMD_RUN_V2			0x00010DAA
> +#define ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V2	0x00010DA5
> +#define ASM_DATA_CMD_WRITE_V2			0x00010DAB
> +#define ASM_SESSION_CMD_SUSPEND			0x00010DEC
> +#define ASM_STREAM_CMD_OPEN_WRITE_V3		0x00010DB3
> +
> +#define ASM_LEGACY_STREAM_SESSION	0
> +#define ASM_END_POINT_DEVICE_MATRIX	0
> +#define DEFAULT_APP_TYPE		0
> +#define TUN_WRITE_IO_MODE		0x0008	/* tunnel read write mode */
>  #define TUN_READ_IO_MODE		0x0004	/* tunnel read write mode */
>  #define SYNC_IO_MODE			0x0001
>  #define ASYNC_IO_MODE			0x0002

Probably prettier to reorder these and make them Q6ASM_IO_MODE_xyz

[..]
>  
> +static int32_t q6asm_callback(struct apr_device *adev,

This callback is an extracted part of q6asm_srvc_callback(), can it be
given a more descriptive name?

> +			      struct apr_client_data *data, int session_id)
> +{
> +	struct audio_client *ac;// = (struct audio_client *)priv;
> +	uint32_t token;
> +	uint32_t *payload;
> +	uint32_t wakeup_flag = 1;
> +	uint32_t client_event = 0;
> +	struct q6asm *q6asm = dev_get_drvdata(&adev->dev);
> +
> +	if (data == NULL)
> +		return -EINVAL;
> +
> +	ac = q6asm_get_audio_client(q6asm, session_id);
> +	if (!q6asm_is_valid_audio_client(ac))
> +		return -EINVAL;
> +
> +	payload = data->payload;
> +
> +	if (data->opcode == APR_BASIC_RSP_RESULT) {

Move this into the switch.

> +		token = data->token;
> +		switch (payload[0]) {

This is again that common response struct.

> +		case ASM_SESSION_CMD_PAUSE:
> +			client_event = ASM_CLIENT_EVENT_CMD_PAUSE_DONE;
> +			break;
> +		case ASM_SESSION_CMD_SUSPEND:
> +			client_event = ASM_CLIENT_EVENT_CMD_SUSPEND_DONE;
> +			break;
> +		case ASM_DATA_CMD_EOS:
> +			client_event = ASM_CLIENT_EVENT_CMD_EOS_DONE;
> +			break;
> +			break;
> +		case ASM_STREAM_CMD_FLUSH:
> +			client_event = ASM_CLIENT_EVENT_CMD_FLUSH_DONE;
> +			break;
> +		case ASM_SESSION_CMD_RUN_V2:
> +			client_event = ASM_CLIENT_EVENT_CMD_RUN_DONE;
> +			break;
> +
> +		case ASM_STREAM_CMD_FLUSH_READBUFS:
> +			if (token != ac->session) {
> +				dev_err(ac->dev, "session invalid\n");
> +				return -EINVAL;
> +			}
> +		case ASM_STREAM_CMD_CLOSE:
> +			client_event = ASM_CLIENT_EVENT_CMD_CLOSE_DONE;
> +			break;
> +		case ASM_STREAM_CMD_OPEN_WRITE_V3:
> +		case ASM_DATA_CMD_MEDIA_FMT_UPDATE_V2:
> +			if (payload[1] != 0) {
> +				dev_err(ac->dev,
> +					"cmd = 0x%x returned error = 0x%x\n",
> +					payload[0], payload[1]);
> +				if (wakeup_flag) {
> +					ac->cmd_state = payload[1];
> +					wake_up(&ac->cmd_wait);
> +				}
> +				return 0;
> +			}
> +			break;
> +		default:
> +			dev_err(ac->dev, "command[0x%x] not expecting rsp\n",
> +				payload[0]);
> +			break;
> +		}
> +
> +		if (ac->cmd_state && wakeup_flag) {
> +			ac->cmd_state = 0;
> +			wake_up(&ac->cmd_wait);
> +		}
> +		if (ac->cb)
> +			ac->cb(client_event, data->token,
> +			       data->payload, ac->priv);
> +
> +		return 0;
> +	}
> +
> +	switch (data->opcode) {
> +	case ASM_DATA_EVENT_WRITE_DONE_V2:{
> +			struct audio_port_data *port =
> +			    &ac->port[SNDRV_PCM_STREAM_PLAYBACK];
> +
> +			client_event = ASM_CLIENT_EVENT_DATA_WRITE_DONE;
> +
> +			if (ac->io_mode & SYNC_IO_MODE) {
> +				dma_addr_t phys = port->buf[data->token].phys;
> +
> +				if (lower_32_bits(phys) != payload[0] ||
> +				    upper_32_bits(phys) != payload[1]) {
> +					dev_err(ac->dev, "Expected addr %pa\n",
> +						&port->buf[data->token].phys);
> +					return -EINVAL;
> +				}
> +				token = data->token;
> +				port->buf[token].used = 1;
> +			}
> +			break;
> +		}
> +	}
> +	if (ac->cb)
> +		ac->cb(client_event, data->token, data->payload, ac->priv);
> +
> +	return 0;
> +}
> +
>  static int q6asm_srvc_callback(struct apr_device *adev, struct apr_client_data *data)
>  {
>  	struct q6asm *a, *q6asm = dev_get_drvdata(&adev->dev);
> @@ -415,12 +581,16 @@ static int q6asm_srvc_callback(struct apr_device *adev, struct apr_client_data *
>  	struct audio_port_data *port;
>  	uint32_t dir = 0;
>  	uint32_t sid = 0;
> +	int dest_port;
>  	uint32_t *payload;
>  
>  	if (!data) {
>  		dev_err(&adev->dev, "%s: Invalid CB\n", __func__);
>  		return 0;
>  	}
> +	dest_port = (data->dest_port >> 8) & 0xFF;
> +	if (dest_port)
> +		return q6asm_callback(adev, data, dest_port);

You call dest_port "session_id" above, this seems to be a better name
for this variable.

>  
>  	payload = data->payload;
>  	sid = (data->token >> 8) & 0x0F;
> @@ -540,6 +710,364 @@ struct audio_client *q6asm_audio_client_alloc(struct device *dev,
>  }
>  EXPORT_SYMBOL_GPL(q6asm_audio_client_alloc);
>  
> +static int __q6asm_open_write(struct audio_client *ac, uint32_t format,
> +			      uint16_t bits_per_sample, uint32_t stream_id,
> +			      bool is_gapless_mode)
> +{
> +	struct asm_stream_cmd_open_write_v3 open;
> +	int rc;
> +
> +	q6asm_add_hdr(ac, &open.hdr, sizeof(open), true, stream_id);
> +	ac->cmd_state = -1;
> +
> +	open.hdr.opcode = ASM_STREAM_CMD_OPEN_WRITE_V3;
> +	open.mode_flags = 0x00;
> +	open.mode_flags |= ASM_LEGACY_STREAM_SESSION;
> +	if (is_gapless_mode)

This is hard coded as false.

> +		open.mode_flags |= 1 << ASM_SHIFT_GAPLESS_MODE_FLAG;
> +
> +	/* source endpoint : matrix */
> +	open.sink_endpointype = ASM_END_POINT_DEVICE_MATRIX;
> +	open.bits_per_sample = bits_per_sample;
> +	open.postprocopo_id = DEFAULT_POPP_TOPOLOGY;
> +
> +	switch (format) {
> +	case FORMAT_LINEAR_PCM:
> +		open.dec_fmt_id = ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V2;
> +		break;
> +	default:
> +		dev_err(ac->dev, "Invalid format 0x%x\n", format);
> +		return -EINVAL;
> +	}
> +	rc = apr_send_pkt(ac->adev, (uint32_t *) &open);
> +	if (rc < 0)
> +		return rc;
> +
> +	rc = wait_event_timeout(ac->cmd_wait, (ac->cmd_state >= 0), 5 * HZ);
> +	if (!rc) {
> +		dev_err(ac->dev, "timeout on open write\n");
> +		return -ETIMEDOUT;
> +	}

Almost every time you apr_send_pkt() you have this wait with timeout,
can this send/wait/return be wrapped in a helper function to reduce the
duplication?

Creating a q6asm_send_sync() and q6asm_send_async() pair with this logic
should help quite a bit.

> +
> +	if (ac->cmd_state > 0)
> +		return adsp_err_get_lnx_err_code(ac->cmd_state);
> +
> +	ac->io_mode |= TUN_WRITE_IO_MODE;
> +
> +	return 0;
> +}
> +
> +/**
> + * q6asm_open_write() - Open audio client for writing
> + *
> + * @ac: audio client pointer
> + * @format: audio sample format
> + * @bits_per_sample: bits per sample
> + *
> + * Return: Will be an negative value on error or zero on success
> + */
> +int q6asm_open_write(struct audio_client *ac, uint32_t format,
> +		     uint16_t bits_per_sample)
> +{
> +	return __q6asm_open_write(ac, format, bits_per_sample,

I don't see a particular reason for not inlining this, is there one
coming later in the series?

> +				  ac->stream_id, false);
> +}
> +EXPORT_SYMBOL_GPL(q6asm_open_write);
> +
> +static int __q6asm_run(struct audio_client *ac, uint32_t flags,
> +	      uint32_t msw_ts, uint32_t lsw_ts, bool wait)
> +{
> +	struct asm_session_cmd_run_v2 run;
> +	int rc;
> +
> +	q6asm_add_hdr(ac, &run.hdr, sizeof(run), true, ac->stream_id);
> +	ac->cmd_state = -1;
> +
> +	run.hdr.opcode = ASM_SESSION_CMD_RUN_V2;
> +	run.flags = flags;
> +	run.time_lsw = lsw_ts;
> +	run.time_msw = msw_ts;
> +
> +	rc = apr_send_pkt(ac->adev, (uint32_t *) &run);
> +	if (rc < 0)
> +		return rc;
> +
> +	if (wait) {

Rather than having half of the function conditional I would recommend
inlining this function in the two callers.

In particular if you can come up with a helper function for the
send/wait/handle-error case.

> +		rc = wait_event_timeout(ac->cmd_wait, (ac->cmd_state >= 0),
> +					5 * HZ);
> +		if (!rc) {
> +			dev_err(ac->dev, "timeout on run cmd\n");
> +			return -ETIMEDOUT;
> +		}
> +		if (ac->cmd_state > 0)
> +			return adsp_err_get_lnx_err_code(ac->cmd_state);
> +	}
> +
> +	return 0;
> +}
> +
> +/**
> + * q6asm_run() - start the audio client
> + *
> + * @ac: audio client pointer
> + * @flags: flags associated with write
> + * @msw_ts: timestamp msw
> + * @lsw_ts: timestamp lsw
> + *
> + * Return: Will be an negative value on error or zero on success
> + */
> +int q6asm_run(struct audio_client *ac, uint32_t flags,
> +	      uint32_t msw_ts, uint32_t lsw_ts)
> +{
> +	return __q6asm_run(ac, flags, msw_ts, lsw_ts, true);
> +}
> +EXPORT_SYMBOL_GPL(q6asm_run);
> +
> +/**
> + * q6asm_run_nowait() - start the audio client withou blocking
> + *
> + * @ac: audio client pointer
> + * @flags: flags associated with write
> + * @msw_ts: timestamp msw
> + * @lsw_ts: timestamp lsw
> + *
> + * Return: Will be an negative value on error or zero on success
> + */
> +int q6asm_run_nowait(struct audio_client *ac, uint32_t flags,
> +	      uint32_t msw_ts, uint32_t lsw_ts)
> +{
> +	return __q6asm_run(ac, flags, msw_ts, lsw_ts, false);
> +}
> +EXPORT_SYMBOL_GPL(q6asm_run_nowait);
> +
> +/**
> + * q6asm_media_format_block_multi_ch_pcm() - setup pcm configuration
> + *
> + * @ac: audio client pointer
> + * @rate: audio sample rate
> + * @channels: number of audio channels.
> + * @use_default_chmap: flag to use default ch map.
> + * @channel_map: channel map pointer
> + * @bits_per_sample: bits per sample
> + *
> + * Return: Will be an negative value on error or zero on success
> + */
> +int q6asm_media_format_block_multi_ch_pcm(struct audio_client *ac,
> +					  uint32_t rate, uint32_t channels,
> +					  bool use_default_chmap,
> +					  char *channel_map,

This should be u8 channel_map[PCM_FORMAT_MAX_NUM_CHANNEL], possibly
char. Unless you, as I suggest below, want to be able to represent
use_default_chmap = false, by setting this to NULL.

> +					  uint16_t bits_per_sample)
> +{
> +	struct asm_multi_channel_pcm_fmt_blk_v2 fmt;
> +	u8 *channel_mapping;
> +	int rc = 0;

Unnecessary initialization.

> +
> +	q6asm_add_hdr(ac, &fmt.hdr, sizeof(fmt), true, ac->stream_id);
> +	ac->cmd_state = -1;
> +
> +	fmt.hdr.opcode = ASM_DATA_CMD_MEDIA_FMT_UPDATE_V2;
> +	fmt.fmt_blk.fmt_blk_size = sizeof(fmt) - sizeof(fmt.hdr) -
> +	    sizeof(fmt.fmt_blk);
> +	fmt.num_channels = channels;
> +	fmt.bits_per_sample = bits_per_sample;
> +	fmt.sample_rate = rate;
> +	fmt.is_signed = 1;
> +
> +	channel_mapping = fmt.channel_mapping;
> +
> +	if (use_default_chmap) {

Passing NULL as channel_map would probably be a nicer way to say this,
instead of having a separate bool.

> +		if (q6dsp_map_channels(channel_mapping, channels)) {
> +			dev_err(ac->dev, " map channels failed %d\n", channels);
> +			return -EINVAL;
> +		}
> +	} else {
> +		memcpy(channel_mapping, channel_map,
> +		       PCM_FORMAT_MAX_NUM_CHANNEL);
> +	}
> +
> +	rc = apr_send_pkt(ac->adev, (uint32_t *) &fmt);
> +	if (rc < 0)
> +		goto fail_cmd;
> +
> +	rc = wait_event_timeout(ac->cmd_wait, (ac->cmd_state >= 0), 5 * HZ);
> +	if (!rc) {
> +		dev_err(ac->dev, "timeout on format update\n");
> +		return -ETIMEDOUT;
> +	}
> +	if (ac->cmd_state > 0)
> +		return adsp_err_get_lnx_err_code(ac->cmd_state);
> +
> +	return 0;
> +fail_cmd:
> +	return rc;
> +}
> +EXPORT_SYMBOL_GPL(q6asm_media_format_block_multi_ch_pcm);
> +
> +/**
> + * q6asm_write_nolock() - non blocking write
> + *
> + * @ac: audio client pointer
> + * @len: lenght in bytes
> + * @msw_ts: timestamp msw
> + * @lsw_ts: timestamp lsw
> + * @flags: flags associated with write
> + *
> + * Return: Will be an negative value on error or zero on success
> + */
> +int q6asm_write_nolock(struct audio_client *ac, uint32_t len, uint32_t msw_ts,
> +		       uint32_t lsw_ts, uint32_t flags)

q6asm_write_async() is probably a better name, nolock indicates some
relationship to mutual exclusions...

> +{
> +	struct asm_data_cmd_write_v2 write;
> +	struct audio_port_data *port;
> +	struct audio_buffer *ab;
> +	int dsp_buf = 0;
> +	int rc = 0;
> +
> +	if (ac->io_mode & SYNC_IO_MODE) {

Bail early if this isn't true, to save you the indentation level.

> +		port = &ac->port[SNDRV_PCM_STREAM_PLAYBACK];
> +		q6asm_add_hdr(ac, &write.hdr, sizeof(write), false,
> +			      ac->stream_id);
> +
> +		dsp_buf = port->dsp_buf;
> +		ab = &port->buf[dsp_buf];

So we're just unconditionally telling the remote side about the next buf
in our ring buffer. Do we need to ensure that this is available/ready?

> +
> +		write.hdr.token = port->dsp_buf;
> +		write.hdr.opcode = ASM_DATA_CMD_WRITE_V2;
> +		write.buf_addr_lsw = lower_32_bits(ab->phys);
> +		write.buf_addr_msw = upper_32_bits(ab->phys);
> +		write.buf_size = len;
> +		write.seq_id = port->dsp_buf;
> +		write.timestamp_lsw = lsw_ts;
> +		write.timestamp_msw = msw_ts;
> +		write.mem_map_handle =
> +		    ac->port[SNDRV_PCM_STREAM_PLAYBACK].mem_map_handle;
> +
> +		if (flags == NO_TIMESTAMP)
> +			write.flags = (flags & 0x800000FF);

Fill in the constant and this becomes

	if flags == 0xff00:
		write.flags = 0xff00 & 0x800000ff;

Or in other words:
	if flags == 0xff00:
		write.flags = 0;

> +		else
> +			write.flags = (0x80000000 | flags);

Drop the parenthesis and flip the |. It would be nice to have a define
or a comment indicating what BIT(31) is...

> +
> +		port->dsp_buf++;
> +
> +		if (port->dsp_buf >= port->max_buf_cnt)
> +			port->dsp_buf = 0;
> +
> +		rc = apr_send_pkt(ac->adev, (uint32_t *) &write);
> +		if (rc < 0)
> +			return rc;
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(q6asm_write_nolock);
> +
> +static void q6asm_reset_buf_state(struct audio_client *ac)
> +{
> +	int cnt = 0;
> +	int loopcnt = 0;
> +	int used;
> +	struct audio_port_data *port = NULL;
> +
> +	if (ac->io_mode & SYNC_IO_MODE) {
> +		used = (ac->io_mode & TUN_WRITE_IO_MODE ? 1 : 0);
> +		mutex_lock(&ac->cmd_lock);
> +		for (loopcnt = 0; loopcnt <= SNDRV_PCM_STREAM_CAPTURE;
> +		     loopcnt++) {
> +			port = &ac->port[loopcnt];
> +			cnt = port->max_buf_cnt - 1;
> +			port->dsp_buf = 0;
> +			while (cnt >= 0) {
> +				if (!port->buf)
> +					continue;
> +				port->buf[cnt].used = used;
> +				cnt--;
> +			}
> +		}
> +		mutex_unlock(&ac->cmd_lock);
> +	}
> +}
> +
> +static int __q6asm_cmd(struct audio_client *ac, int cmd, bool wait)
> +{
> +	int stream_id = ac->stream_id;
> +	struct apr_hdr hdr;
> +	int rc;
> +
> +	q6asm_add_hdr(ac, &hdr, sizeof(hdr), true, stream_id);
> +	ac->cmd_state = -1;

Resetting cmd_state relates to the send, don't mix it with building the
packet.

> +	switch (cmd) {
> +	case CMD_PAUSE:
> +		hdr.opcode = ASM_SESSION_CMD_PAUSE;
> +		break;
> +	case CMD_SUSPEND:
> +		hdr.opcode = ASM_SESSION_CMD_SUSPEND;
> +		break;
> +	case CMD_FLUSH:
> +		hdr.opcode = ASM_STREAM_CMD_FLUSH;
> +		break;
> +	case CMD_OUT_FLUSH:
> +		hdr.opcode = ASM_STREAM_CMD_FLUSH_READBUFS;
> +		break;
> +	case CMD_EOS:
> +		hdr.opcode = ASM_DATA_CMD_EOS;
> +		ac->cmd_state = 0;
> +		break;
> +	case CMD_CLOSE:
> +		hdr.opcode = ASM_STREAM_CMD_CLOSE;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	rc = apr_send_pkt(ac->adev, (uint32_t *) &hdr);
> +	if (rc < 0)
> +		return rc;
> +
> +	if (!wait)
> +		return 0;

I've asked you to split the others into _sync() vs _async() operations.

One particular concern I have is that I don't see any mutual exclusion
protecting the cmd_state and a call with !wait will overwrite the
existing value, which might be unexpected.

> +
> +	rc = wait_event_timeout(ac->cmd_wait, (ac->cmd_state >= 0), 5 * HZ);
> +	if (!rc) {
> +		dev_err(ac->dev, "timeout response for opcode[0x%x]\n",
> +			hdr.opcode);
> +		return -ETIMEDOUT;
> +	}
> +	if (ac->cmd_state > 0)
> +		return adsp_err_get_lnx_err_code(ac->cmd_state);
> +
> +	if (cmd == CMD_FLUSH)
> +		q6asm_reset_buf_state(ac);
> +
> +	return 0;
> +}
[..]
> diff --git a/sound/soc/qcom/qdsp6/q6asm.h b/sound/soc/qcom/qdsp6/q6asm.h
> index e1409c368600..b4896059da79 100644
> --- a/sound/soc/qcom/qdsp6/q6asm.h
> +++ b/sound/soc/qcom/qdsp6/q6asm.h
> @@ -2,7 +2,34 @@
>  #ifndef __Q6_ASM_H__
>  #define __Q6_ASM_H__
>  
> +/* ASM client callback events */
> +#define CMD_PAUSE			0x0001

These defines has rather generic names...

[..]
> +
> +#define MSM_FRONTEND_DAI_MULTIMEDIA1	0
> +#define MSM_FRONTEND_DAI_MULTIMEDIA2	1
> +#define	MSM_FRONTEND_DAI_MULTIMEDIA3	2
> +#define MSM_FRONTEND_DAI_MULTIMEDIA4	3
> +#define MSM_FRONTEND_DAI_MULTIMEDIA5	4
> +#define MSM_FRONTEND_DAI_MULTIMEDIA6	5
> +#define	MSM_FRONTEND_DAI_MULTIMEDIA7	6
> +#define	MSM_FRONTEND_DAI_MULTIMEDIA8	7
> +
>  #define MAX_SESSIONS	16
> +#define NO_TIMESTAMP    0xFF00
> +#define FORMAT_LINEAR_PCM   0x0000

Ditto.

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux