On 01/01, Paul Cercueil wrote:
> diff --git a/drivers/clk/ingenic/tcu.c b/drivers/clk/ingenic/tcu.c
> new file mode 100644
> index 000000000000..36afe3f02f91
> --- /dev/null
> +++ b/drivers/clk/ingenic/tcu.c
> @@ -0,0 +1,336 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Ingenic JZ47xx SoC TCU clocks driver
> + * Copyright (C) 2018 Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/mfd/syscon/ingenic-tcu.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/regmap.h>
> +#include <linux/spinlock.h>
Used?
> +
> +#include <dt-bindings/clock/ingenic,tcu.h>
> +
> +enum ingenic_version {
> + ID_JZ4740,
> + ID_JZ4770,
> + ID_JZ4780,
> +};
> +
> +struct ingenic_tcu {
> + struct device_node *np;
Is this used?
> + struct regmap *map;
> +
> + struct clk_onecell_data clocks;
> +};
> +
> +struct ingenic_tcu_clk_info {
> + struct clk_init_data init_data;
> + u8 gate_bit;
> + u8 tcsr_reg;
> +};
> +
> +struct ingenic_tcu_clk {
> + struct clk_hw hw;
> +
> + struct ingenic_tcu *tcu;
> + const struct ingenic_tcu_clk_info *info;
> +
> + unsigned int idx;
> +};
> +
> +#define to_tcu_clk(_hw) container_of(_hw, struct ingenic_tcu_clk, hw)
> +
> +static int ingenic_tcu_enable(struct clk_hw *hw)
> +{
> + struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
> + const struct ingenic_tcu_clk_info *info = tcu_clk->info;
> + struct ingenic_tcu *tcu = tcu_clk->tcu;
> +
> + regmap_write(tcu->map, REG_TSCR, BIT(info->gate_bit));
> + return 0;
> +}
> +
> +static void ingenic_tcu_disable(struct clk_hw *hw)
> +{
> + struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
> + struct ingenic_tcu *tcu = tcu_clk->tcu;
> + const struct ingenic_tcu_clk_info *info = tcu_clk->info;
> +
> + regmap_write(tcu->map, REG_TSSR, BIT(info->gate_bit));
> +}
> +
> +static int ingenic_tcu_is_enabled(struct clk_hw *hw)
> +{
> + struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
> + struct ingenic_tcu *tcu = tcu_clk->tcu;
> + const struct ingenic_tcu_clk_info *info = tcu_clk->info;
> + unsigned int value;
> +
> + regmap_read(tcu->map, REG_TSR, &value);
> +
> + return !(value & BIT(info->gate_bit));
> +}
> +
> +static u8 ingenic_tcu_get_parent(struct clk_hw *hw)
> +{
> + struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
> + struct ingenic_tcu *tcu = tcu_clk->tcu;
> + const struct ingenic_tcu_clk_info *info = tcu_clk->info;
> + unsigned int val = 0;
> + int ret;
> +
> + ret = regmap_read(tcu->map, info->tcsr_reg, &val);
> + WARN_ONCE(ret < 0, "Unable to read TCSR %i", tcu_clk->idx);
> +
> + return (u8) ffs(val & TCSR_PARENT_CLOCK_MASK) - 1;
Is the cast necessary?
> +}
> +
> +static int ingenic_tcu_set_parent(struct clk_hw *hw, u8 idx)
> +{
> + struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
> + struct ingenic_tcu *tcu = tcu_clk->tcu;
> + const struct ingenic_tcu_clk_info *info = tcu_clk->info;
> + int ret;
> +
> + /*
> + * Our clock provider has the CLK_SET_PARENT_GATE flag set, so we know
> + * that the clk is in unprepared state. To be able to access TCSR
> + * we must ungate the clock supply and we gate it again when done.
> + */
> +
> + regmap_write(tcu->map, REG_TSCR, BIT(info->gate_bit));
> +
> + ret = regmap_update_bits(tcu->map, info->tcsr_reg,
> + TCSR_PARENT_CLOCK_MASK, BIT(idx));
> + WARN_ONCE(ret < 0, "Unable to update TCSR %i", tcu_clk->idx);
> +
> + regmap_write(tcu->map, REG_TSSR, BIT(info->gate_bit));
> +
> + return 0;
> +}
> +
> +static unsigned long ingenic_tcu_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
> + struct ingenic_tcu *tcu = tcu_clk->tcu;
> + const struct ingenic_tcu_clk_info *info = tcu_clk->info;
> + unsigned int prescale;
> + int ret;
> +
> + ret = regmap_read(tcu->map, info->tcsr_reg, &prescale);
> + WARN_ONCE(ret < 0, "Unable to read TCSR %i", tcu_clk->idx);
> +
> + prescale = (prescale & TCSR_PRESCALE_MASK) >> TCSR_PRESCALE_LSB;
> +
> + return parent_rate >> (prescale * 2);
> +}
> +
> +static long ingenic_tcu_round_rate(struct clk_hw *hw, unsigned long req_rate,
> + unsigned long *parent_rate)
> +{
> + long rate = (long) *parent_rate;
Is there a reason why rate is signed here?
> + unsigned int shift;
> +
> + if (req_rate > rate)
> + return -EINVAL;
> +
> + for (shift = 0; shift < 10; shift += 2)
> + if ((rate >> shift) <= req_rate)
> + return rate >> shift;
> +
> + return rate >> 10;
Can it be?
for (shift = 0; shift < 10; shift += 2)
if ((rate >> shift) <= req_rate)
break;
return rate >> shift;
> +}
> +
> +static int ingenic_tcu_set_rate(struct clk_hw *hw, unsigned long req_rate,
> + unsigned long parent_rate)
> +{
> + struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
> + const struct ingenic_tcu_clk_info *info = tcu_clk->info;
> + struct ingenic_tcu *tcu = tcu_clk->tcu;
> + u8 prescale = (ffs(parent_rate / req_rate) / 2) << TCSR_PRESCALE_LSB;
> + int ret;
> +
> + /*
> + * Our clock provider has the CLK_SET_RATE_GATE flag set, so we know
> + * that the clk is in unprepared state. To be able to access TCSR
> + * we must ungate the clock supply and we gate it again when done.
> + */
> +
> + regmap_write(tcu->map, REG_TSCR, BIT(info->gate_bit));
> +
> + ret = regmap_update_bits(tcu->map, info->tcsr_reg,
> + TCSR_PRESCALE_MASK, prescale);
> + WARN_ONCE(ret < 0, "Unable to update TCSR %i", tcu_clk->idx);
> +
> + regmap_write(tcu->map, REG_TSSR, BIT(info->gate_bit));
> +
> + return 0;
> +}
> +
> +static const struct clk_ops ingenic_tcu_clk_ops = {
> + .get_parent = ingenic_tcu_get_parent,
> + .set_parent = ingenic_tcu_set_parent,
> +
> + .recalc_rate = ingenic_tcu_recalc_rate,
> + .round_rate = ingenic_tcu_round_rate,
> + .set_rate = ingenic_tcu_set_rate,
> +
> + .enable = ingenic_tcu_enable,
> + .disable = ingenic_tcu_disable,
> + .is_enabled = ingenic_tcu_is_enabled,
> +};
> +
> +static const char * const ingenic_tcu_timer_parents[] = {
> + "pclk",
> + "rtc",
> + "ext",
> +};
> +
> +static const struct ingenic_tcu_clk_info ingenic_tcu_clk_info[] = {
> +#define DEF_TIMER(_name, _gate_bit, _tcsr) \
> + { \
> + .init_data = { \
> + .name = _name, \
> + .parent_names = ingenic_tcu_timer_parents, \
> + .num_parents = ARRAY_SIZE(ingenic_tcu_timer_parents),\
> + .ops = &ingenic_tcu_clk_ops, \
> + .flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE,\
> + }, \
> + .gate_bit = _gate_bit, \
> + .tcsr_reg = _tcsr, \
> + }
> + [JZ4740_CLK_TIMER0] = DEF_TIMER("timer0", 0, REG_TCSRc(0)),
> + [JZ4740_CLK_TIMER1] = DEF_TIMER("timer1", 1, REG_TCSRc(1)),
> + [JZ4740_CLK_TIMER2] = DEF_TIMER("timer2", 2, REG_TCSRc(2)),
> + [JZ4740_CLK_TIMER3] = DEF_TIMER("timer3", 3, REG_TCSRc(3)),
> + [JZ4740_CLK_TIMER4] = DEF_TIMER("timer4", 4, REG_TCSRc(4)),
> + [JZ4740_CLK_TIMER5] = DEF_TIMER("timer5", 5, REG_TCSRc(5)),
> + [JZ4740_CLK_TIMER6] = DEF_TIMER("timer6", 6, REG_TCSRc(6)),
> + [JZ4740_CLK_TIMER7] = DEF_TIMER("timer7", 7, REG_TCSRc(7)),
> + [JZ4740_CLK_WDT] = DEF_TIMER("wdt", 16, REG_WDT_TCSR),
> + [JZ4770_CLK_OST] = DEF_TIMER("ost", 15, REG_OST_TCSR),
> +#undef DEF_TIMER
> +};
> +
> +static int ingenic_tcu_register_clock(struct ingenic_tcu *tcu, unsigned int idx,
> + const struct ingenic_tcu_clk_info *info)
> +{
> + struct ingenic_tcu_clk *tcu_clk;
> + struct clk *clk;
> + int err;
> +
> + tcu_clk = kzalloc(sizeof(*tcu_clk), GFP_KERNEL);
> + if (!tcu_clk)
> + return -ENOMEM;
> +
> + tcu_clk->hw.init = &info->init_data;
> + tcu_clk->idx = idx;
> + tcu_clk->info = info;
> + tcu_clk->tcu = tcu;
> +
> + /* Set EXT as the default parent clock */
> + ingenic_tcu_set_parent(&tcu_clk->hw, 2);
> +
> + ingenic_tcu_disable(&tcu_clk->hw);
> +
> + clk = clk_register(NULL, &tcu_clk->hw);
clk_hw_register?
> + if (IS_ERR(clk)) {
> + err = PTR_ERR(clk);
> + goto err_free_tcu_clk;
> + }
> +
> + err = clk_register_clkdev(clk, info->init_data.name, NULL);
There's a clk_hw_register_clkdev() too.
> + if (err)
> + goto err_clk_unregister;
> +
> + tcu->clocks.clks[idx] = clk;
> + return 0;
> +
> +err_clk_unregister:
> + clk_unregister(clk);
> +err_free_tcu_clk:
> + kfree(tcu_clk);
> + return err;
> +}
> +
> +static void __init ingenic_tcu_init(struct device_node *np,
> + enum ingenic_version id)
> +{
> + struct ingenic_tcu *tcu;
> + size_t i, nb_clks;
> + int ret = -ENOMEM;
> +
> + if (id >= ID_JZ4770)
> + nb_clks = (JZ4770_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
> + else
> + nb_clks = (JZ4740_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
> +
> + tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
> + if (!tcu) {
> + pr_err("%s: cannot allocate memory\n", __func__);
We don't need allocation error messages. Please run checkpatch.
> + return;
> + }
> +
> + tcu->map = syscon_node_to_regmap(np->parent);
> + if (IS_ERR(tcu->map)) {
> + pr_err("%s: failed to map TCU registers\n", __func__);
> + goto err_free_tcu;
> + }
> +
> + tcu->clocks.clk_num = nb_clks;
> + tcu->clocks.clks = kcalloc(nb_clks, sizeof(struct clk *), GFP_KERNEL);
> + if (!tcu->clocks.clks) {
> + pr_err("%s: cannot allocate memory\n", __func__);
We don't need allocation error messages. Please run checkpatch.
> + goto err_free_tcu;
> + }
> +
> + for (i = 0; i < nb_clks; i++) {
> + ret = ingenic_tcu_register_clock(tcu, i,
> + &ingenic_tcu_clk_info[JZ4740_CLK_TIMER0 + i]);
> + if (ret) {
> + pr_err("%s: cannot register clocks\n", __func__);
> + goto err_unregister;
> + }
> + }
> +
> + ret = of_clk_add_provider(np, of_clk_src_onecell_get, &tcu->clocks);
Can you add a clk_hw provider instead of a clk provider?
> + if (ret) {
> + pr_err("%s: cannot add OF clock provider\n", __func__);
> + goto err_unregister;
> + }
> +
> + return;
> +
> +err_unregister:
> + for (i = 0; i < tcu->clocks.clk_num; i++)
> + if (tcu->clocks.clks[i])
> + clk_unregister(tcu->clocks.clks[i]);
> + kfree(tcu->clocks.clks);
> +err_free_tcu:
> + kfree(tcu);
> +}
> +
Can you add a comment here describing why we have to use
CLK_OF_DECLARE instead of platform drivers?
> +static void __init jz4740_tcu_init(struct device_node *np)
> +{
> + ingenic_tcu_init(np, ID_JZ4740);
> +}
> +CLK_OF_DECLARE(ingenic_tcu, "ingenic,jz4740-tcu-clocks", jz4740_tcu_init);
> +
> +static void __init jz4770_tcu_init(struct device_node *np)
> +{
> + ingenic_tcu_init(np, ID_JZ4770);
> +}
> +CLK_OF_DECLARE(jz4770_tcu, "ingenic,jz4770-tcu-clocks", jz4770_tcu_init);
> +
> +static void __init jz4780_tcu_init(struct device_node *np)
> +{
> + ingenic_tcu_init(np, ID_JZ4780);
> +}
> +CLK_OF_DECLARE(jz4780_tcu, "ingenic,jz4780-tcu-clocks", jz4780_tcu_init);
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
