Hi,
On Tue, Jan 02, 2018 at 02:17:22PM +0100, Pavel Machek wrote:
> This adds dts support for magnetometer and touchscreen on Nokia N9.
I think it makes sense to have this splitted.
> Signed-off-by: Pavel Machek <pavel@xxxxxx>
>
> diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
> index 39e35f8..57a6679 100644
> --- a/arch/arm/boot/dts/omap3-n9.dts
> +++ b/arch/arm/boot/dts/omap3-n9.dts
> @@ -36,6 +57,22 @@
> };
> };
> };
> +
> + touch@4b {
touchscreen@
> + compatible = "atmel,maxtouch";
> + reg = <0x4b>;
> + interrupt-parent = <&gpio2>;
> + interrupts = <29 2>; /* gpio_61, IRQF_TRIGGER_FALLING*/
reset-gpios = <&gpio3 17 GPIO_ACTIVE_SOMETHING>;
> + vdd-supply = <&vio>;
> + avdd-supply = <&vaux1>;
Those two are not mentioned in the binding and not supported by the
driver as far as I can see?
> + };
> +};
Touchscreen with the same settings is required for n950, so it
should be in the shared n950 + n9 file.
> +&i2c3 {
> + ak8975@0f {
> + compatible = "asahi-kasei,ak8975";
> + reg = <0x0f>;
> + };
> };
Looking at the N9 board file this is missing a rotation matrix. This
is supported by the binding:
Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
>
> &isp {
-- Sebastian
Attachment:
signature.asc
Description: PGP signature
