Hi Paul,
On 2 January 2018 at 20:38, Paul Cercueil <paul@xxxxxxxxxxxxxxx> wrote:
> Provide just enough bits (clocks, clocksource, uart) to allow a kernel
> to boot on the JZ4770 SoC to a initramfs userspace.
>
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> ---
> arch/mips/boot/dts/ingenic/jz4770.dtsi | 212 +++++++++++++++++++++++++++++++++
> arch/mips/jz4740/Kconfig | 6 +
> arch/mips/jz4740/time.c | 2 +-
> 3 files changed, 219 insertions(+), 1 deletion(-)
> create mode 100644 arch/mips/boot/dts/ingenic/jz4770.dtsi
>
> v2: No change
> v3: No change
> v4: No change
> v5: Use SPDX license identifier
>
> diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> new file mode 100644
> index 000000000000..7c2804f3f5f1
> --- /dev/null
> +++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> @@ -0,0 +1,212 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <dt-bindings/clock/jz4770-cgu.h>
> +
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "ingenic,jz4770";
> +
> + cpuintc: interrupt-controller {
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + compatible = "mti,cpu-interrupt-controller";
> + };
> +
> + intc: interrupt-controller@10001000 {
> + compatible = "ingenic,jz4770-intc";
> + reg = <0x10001000 0x40>;
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interrupt-parent = <&cpuintc>;
> + interrupts = <2>;
> + };
> +
> + ext: ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + osc32k: osc32k {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + };
> +
> + cgu: jz4770-cgu@10000000 {
> + compatible = "ingenic,jz4770-cgu";
> + reg = <0x10000000 0x100>;
> +
> + clocks = <&ext>, <&osc32k>;
> + clock-names = "ext", "osc32k";
> +
> + #clock-cells = <1>;
> + };
> +
> + pinctrl: pin-controller@10010000 {
> + compatible = "ingenic,jz4770-pinctrl";
> + reg = <0x10010000 0x600>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpa: gpio@0 {
> + compatible = "ingenic,jz4770-gpio";
> + reg = <0>;
> +
> + gpio-controller;
> + gpio-ranges = <&pinctrl 0 0 32>;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <17>;
> + };
> +
> + gpb: gpio@1 {
> + compatible = "ingenic,jz4770-gpio";
> + reg = <1>;
> +
> + gpio-controller;
> + gpio-ranges = <&pinctrl 0 32 32>;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <16>;
> + };
> +
> + gpc: gpio@2 {
> + compatible = "ingenic,jz4770-gpio";
> + reg = <2>;
> +
> + gpio-controller;
> + gpio-ranges = <&pinctrl 0 64 32>;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <15>;
> + };
> +
> + gpd: gpio@3 {
> + compatible = "ingenic,jz4770-gpio";
> + reg = <3>;
> +
> + gpio-controller;
> + gpio-ranges = <&pinctrl 0 96 32>;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <14>;
> + };
> +
> + gpe: gpio@4 {
> + compatible = "ingenic,jz4770-gpio";
> + reg = <4>;
> +
> + gpio-controller;
> + gpio-ranges = <&pinctrl 0 128 32>;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <13>;
> + };
> +
> + gpf: gpio@5 {
> + compatible = "ingenic,jz4770-gpio";
> + reg = <5>;
> +
> + gpio-controller;
> + gpio-ranges = <&pinctrl 0 160 32>;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <12>;
> + };
> + };
> +
> + uart0: serial@10030000 {
> + compatible = "ingenic,jz4770-uart";
> + reg = <0x10030000 0x100>;
> +
> + clocks = <&ext>, <&cgu JZ4770_CLK_UART0>;
> + clock-names = "baud", "module";
> +
> + interrupt-parent = <&intc>;
> + interrupts = <5>;
> +
> + status = "disabled";
> + };
> +
> + uart1: serial@10031000 {
> + compatible = "ingenic,jz4770-uart";
> + reg = <0x10031000 0x100>;
> +
> + clocks = <&ext>, <&cgu JZ4770_CLK_UART1>;
> + clock-names = "baud", "module";
> +
> + interrupt-parent = <&intc>;
> + interrupts = <4>;
> +
> + status = "disabled";
> + };
> +
> + uart2: serial@10032000 {
> + compatible = "ingenic,jz4770-uart";
> + reg = <0x10032000 0x100>;
> +
> + clocks = <&ext>, <&cgu JZ4770_CLK_UART2>;
> + clock-names = "baud", "module";
> +
> + interrupt-parent = <&intc>;
> + interrupts = <3>;
> +
> + status = "disabled";
> + };
> +
> + uart3: serial@10033000 {
> + compatible = "ingenic,jz4770-uart";
> + reg = <0x10033000 0x100>;
> +
> + clocks = <&ext>, <&cgu JZ4770_CLK_UART3>;
> + clock-names = "baud", "module";
> +
> + interrupt-parent = <&intc>;
> + interrupts = <2>;
> +
> + status = "disabled";
> + };
> +
> + uhc: uhc@13430000 {
> + compatible = "generic-ohci";
> + reg = <0x13430000 0x1000>;
> +
> + clocks = <&cgu JZ4770_CLK_UHC>, <&cgu JZ4770_CLK_UHC_PHY>;
> + assigned-clocks = <&cgu JZ4770_CLK_UHC>;
> + assigned-clock-rates = <48000000>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <20>;
> +
> + status = "disabled";
> + };
> +};
> diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
> index 643af2012e14..29a9361a2b77 100644
> --- a/arch/mips/jz4740/Kconfig
> +++ b/arch/mips/jz4740/Kconfig
> @@ -18,6 +18,12 @@ config MACH_JZ4740
> bool
> select SYS_HAS_CPU_MIPS32_R1
>
> +config MACH_JZ4770
> + bool
> + select MIPS_CPU_SCACHE
> + select SYS_HAS_CPU_MIPS32_R2
> + select SYS_SUPPORTS_HIGHMEM
> +
> config MACH_JZ4780
> bool
> select MIPS_CPU_SCACHE
> diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
> index bb1ad5119da4..2ca9160f642a 100644
> --- a/arch/mips/jz4740/time.c
> +++ b/arch/mips/jz4740/time.c
> @@ -113,7 +113,7 @@ static struct clock_event_device jz4740_clockevent = {
> #ifdef CONFIG_MACH_JZ4740
> .irq = JZ4740_IRQ_TCU0,
> #endif
> -#ifdef CONFIG_MACH_JZ4780
> +#if defined(CONFIG_MACH_JZ4770) || defined(CONFIG_MACH_JZ4780)
> .irq = JZ4780_IRQ_TCU2,
> #endif
> };
> --
> 2.11.0
>
>
Looks good to me.
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
