On Fri, Dec 22, 2017 at 8:22 PM, Icenowy Zheng <icenowy@xxxxxxx> wrote:
> The H3/H5 SoCs have a HDMI output and a TV Composite output.
>
> Add simplefb nodes for these outputs.
>
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> ---
> arch/arm/boot/dts/sunxi-h3-h5.dtsi | 29 +++++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> index fcb909658cf0..31478c03790d 100644
> --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> @@ -53,6 +53,35 @@
> #address-cells = <1>;
> #size-cells = <1>;
>
> + chosen {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + framebuffer-hdmi {
> + compatible = "allwinner,simple-framebuffer",
> + "simple-framebuffer";
> + allwinner,pipeline = "mixer0-lcd0-hdmi";
> + clocks = <&display_clocks CLK_BUS_MIXER0>,
> + <&ccu CLK_BUS_TCON0>, <&ccu CLK_BUS_HDMI>,
Are the bus clocks necessary? It's not like simplefb is going to access
any of the control registers.
> + <&display_clocks CLK_MIXER0>,
> + <&ccu CLK_TCON0>, <&ccu CLK_HDMI>,
> + <&ccu CLK_HDMI_DDC>;
Is the DDC clock necessary? There's no usage of DDC with simplefb.
ChenYu
> + status = "disabled";
> + };
> +
> + framebuffer-tve {
> + compatible = "allwinner,simple-framebuffer",
> + "simple-framebuffer";
> + allwinner,pipeline = "mixer1-lcd1-tve";
> + clocks = <&display_clocks CLK_BUS_MIXER1>,
> + <&ccu CLK_BUS_TCON1>, <&ccu CLK_BUS_TVE>,
> + <&display_clocks CLK_MIXER1>,
> + <&ccu CLK_TVE>;
> + status = "disabled";
> + };
> + };
> +
> clocks {
> #address-cells = <1>;
> #size-cells = <1>;
> --
> 2.14.2
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
