On 12/28/2017 11:59 AM, Paul Cercueil wrote:
Hi Guenter,
Le jeu. 28 déc. 2017 à 18:48, Guenter Roeck <linux@xxxxxxxxxxxx> a écrit :
On 12/28/2017 08:29 AM, Paul Cercueil wrote:
- Use devm_clk_get instead of clk_get
- Use devm_watchdog_register_device instead of watchdog_register_device
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
drivers/watchdog/jz4740_wdt.c | 27 ++++++++-------------------
1 file changed, 8 insertions(+), 19 deletions(-)
diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c
index 6955deb100ef..92d6ca8ceb49 100644
--- a/drivers/watchdog/jz4740_wdt.c
+++ b/drivers/watchdog/jz4740_wdt.c
@@ -178,40 +178,29 @@ static int jz4740_wdt_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
drvdata->base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(drvdata->base)) {
- ret = PTR_ERR(drvdata->base);
- goto err_out;
- }
+ if (IS_ERR(drvdata->base))
+ return PTR_ERR(drvdata->base);
- drvdata->rtc_clk = clk_get(&pdev->dev, "rtc");
+ drvdata->rtc_clk = devm_clk_get(&pdev->dev, "rtc");
if (IS_ERR(drvdata->rtc_clk)) {
dev_err(&pdev->dev, "cannot find RTC clock\n");
- ret = PTR_ERR(drvdata->rtc_clk);
- goto err_out;
+ return PTR_ERR(drvdata->rtc_clk);
}
- ret = watchdog_register_device(&drvdata->wdt);
+ ret = devm_watchdog_register_device(&pdev->dev, &drvdata->wdt);
if (ret < 0)
- goto err_disable_clk;
+ return ret;
platform_set_drvdata(pdev, drvdata);
- return 0;
-err_disable_clk:
- clk_put(drvdata->rtc_clk);
-err_out:
- return ret;
+ return 0;
}
static int jz4740_wdt_remove(struct platform_device *pdev)
{
struct jz4740_wdt_drvdata *drvdata = platform_get_drvdata(pdev);
- jz4740_wdt_stop(&drvdata->wdt);
- watchdog_unregister_device(&drvdata->wdt);
- clk_put(drvdata->rtc_clk);
-
- return 0;
+ return jz4740_wdt_stop(&drvdata->wdt);
If the watchdog is running, the module can not be unloaded. Even if that wasn't
the case, this defeats both WDIOF_MAGICCLOSE and watchdog_set_nowayout().
Are you sure this is what you want ? If so, please call
watchdog_stop_on_unregister() before registration; this clarifies that this
is what you want, and you can drop the remove function.
Thanks,
Guenter
This patch does not change the behaviour. We always used that driver built-in; what
should the behaviour be when unloading the module? Keep the watchdog hardware running
if configured for 'nowayout'?
One can still unload the driver. If you are fine with bypassing/dfeating nowayout
and WDIOF_MAGICCLOSE, may I ask why those are enabled in the first place ?
Thanks,
Guenter
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
