Add support for Moxa UC-8410A open platform The UC-8410A computing platform is designed for embedded communication-centric industrial applications The features of UC-8410A are: * QSPI flash * SD slot * 3x LAN * 8x RS-232/422/485 ports, software-selectable * Mini PCIe form factor with PCIe/USB signal * 2x USB host * TPM * Watchdog * RTC * User LEDs * Beeper * Push button Signed-off-by: Jimmy Chen <jimmy.chen@xxxxxxxx> Signed-off-by: Harry YJ Jhou <harryyj.jhou@xxxxxxxx> Signed-off-by: SZ Lin <sz.lin@xxxxxxxx> --- Changes from v2: - Replace underscore with hyphen in node name - Add unit address after nodes with 'reg' property - Sort nodes with unit-address in order of the address - Fix up unit-address in partitions node arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts | 241 ++++++++++++++++++++++++++++ 2 files changed, 242 insertions(+) create mode 100644 arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d0381e9caf21..62ce9b27ad30 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -520,6 +520,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7s-colibri-eval-v3.dtb \ imx7s-warp.dtb dtb-$(CONFIG_SOC_LS1021A) += \ + ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ ls1021a-twr.dtb dtb-$(CONFIG_SOC_VF610) += \ diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts new file mode 100644 index 000000000000..d01f64b252b1 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts @@ -0,0 +1,241 @@ +/* + * Copyright (C) 2017 Moxa Inc. - https://www.moxa.com/ + * + * Author: Harry YJ Jhou (周亞諄) <harryyj.jhou@xxxxxxxx> + * Jimmy Chen (陳永達) <jimmy.chen@xxxxxxxx> + * SZ Lin (林上智) <sz.lin@xxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "ls1021a.dtsi" + +/ { + model = "Moxa UC-8410A"; + + aliases { + enet0_rgmii_phy = &rgmii_phy0; + enet1_rgmii_phy = &rgmii_phy1; + enet2_rgmii_phy = &rgmii_phy2; + }; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + + cel-pwr { + label = "UC8410A:CEL-PWR"; + gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + cel-reset { + label = "UC8410A:CEL-RESET"; + gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + str-led { + label = "UC8410A:RED:PROG"; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + + sw-ready { + label = "UC8410A:GREEN:SWRDY"; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + beeper { + label = "UC8410A:BEEP"; + gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + prog-led0 { + label = "UC8410A:GREEN:PROG2"; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + prog-led1 { + label = "UC8410A:GREEN:PROG1"; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + prog-led2 { + label = "UC8410A:GREEN:PROG0"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + wifi-signal0 { + label = "UC8410A:GREEN:CEL2"; + gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + wifi-signal1 { + label = "UC8410A:GREEN:CEL1"; + gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + wifi-signal2 { + label = "UC8410A:GREEN:CEL0"; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + cpu-diag-red { + label = "UC8410A:RED:DIA"; + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + cpu-diag-green { + label = "UC8410A:GREEN:DIA"; + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + cpu-diag-yellow { + label = "UC8410A:YELLOW:DIA"; + gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pushbtn-key { + label = "push button key"; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + linux,code = <BTN_MISC>; + default-state = "on"; + }; + }; +}; + +&enet0 { + phy-handle = <&rgmii_phy0>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&enet1 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&enet2 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + + tpm@20 { + compatible = "infineon,slb9635tt"; + reg = <0x20>; + }; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@0 { + compatible = "marvell,88e1118"; + reg = <0x0>; + marvell,reg-init = + <3 0x11 0 0x4415>, /* Reg 3,17 */ + <3 0x10 0 0x77>; /* Reg 3,16 */ + }; + + rgmii_phy1: ethernet-phy@1 { + compatible = "marvell,88e1118"; + reg = <0x1>; + marvell,reg-init = + <3 0x11 0 0x4415>, /* Reg 3,17 */ + <3 0x10 0 0x77>; /* Reg 3,16 */ + }; + + rgmii_phy2: ethernet-phy@2 { + compatible = "marvell,88e1118"; + reg = <0x2>; + marvell,reg-init = + <3 0x11 0 0x4415>, /* Reg 3,17 */ + <3 0x10 0 0x77>; /* Reg 3,16 */ + }; +}; + +&qspi { + bus-num = <0>; + fsl,spi-num-chipselects = <2>; + fsl,spi-flash-chipselects = <0>; + fsl,qspi-has-second-chip; + status = "okay"; + + flash: flash@0 { + compatible = "spansion,s25fl064l", "spansion,s25fl164k"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + + partitions@0 { + label = "U-Boot"; + reg = <0x0 0x180000>; + }; + + partitions@180000 { + label = "U-Boot Env"; + reg = <0x180000 0x680000>; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; -- 2.15.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
